The effects of Eu3+ doping on the epitaxial growth and photovoltaic properties of BiFeO3 thin films

Author(s):  
Dingshuai Feng ◽  
Biaohong Huang ◽  
Lingli Li ◽  
Xiaoqi Li ◽  
Youdi Gu ◽  
...  
Coatings ◽  
2016 ◽  
Vol 6 (4) ◽  
pp. 68 ◽  
Author(s):  
Yasuhiro Shirahata ◽  
Takeo Oku

2014 ◽  
Vol 157 (1) ◽  
pp. 168-173 ◽  
Author(s):  
Rajesh K. Katiyar ◽  
Pankaj Misra ◽  
Gerardo Morell ◽  
Ram S. Katiyar

2019 ◽  
Vol 6 (4) ◽  
pp. 669-683 ◽  
Author(s):  
Huaixun Huyan ◽  
Linze Li ◽  
Christopher Addiego ◽  
Wenpei Gao ◽  
Xiaoqing Pan

Abstract Domain walls (DWs) in ferroelectrics are atomically sharp and can be created, erased, and reconfigured within the same physical volume of ferroelectric matrix by external electric fields. They possess a myriad of novel properties and functionalities that are absent in the bulk of the domains, and thus could become an essential element in next-generation nanodevices based on ferroelectrics. The knowledge about the structure and properties of ferroelectric DWs not only advances the fundamental understanding of ferroelectrics, but also provides guidance for the design of ferroelectric-based devices. In this article, we provide a review of structures and properties of DWs in one of the most widely studied ferroelectric systems, BiFeO3 thin films. We correlate their conductivity and photovoltaic properties to the atomic-scale structure and dynamic behaviors of DWs.


2004 ◽  
Vol 283 (2-3) ◽  
pp. 415-421 ◽  
Author(s):  
Xiaoding Qi ◽  
Joonghoe Dho ◽  
Mark Blamire ◽  
Quanxi Jia ◽  
Jang-Sik Lee ◽  
...  

1999 ◽  
Vol 606 ◽  
Author(s):  
Keishi Nishio ◽  
Jirawat Thongrueng ◽  
Yuichi Watanabe ◽  
Toshio Tsuchiya

AbstructWe succeeded in the preparation of strontium-barium niobate (Sr0.3Ba0.7Nb2O6 : SBN30)that have a tetragonal tungsten bronze type structure thin films on SrTiO3 (100), STO, or La doped SrTiO3 (100), LSTO, single crystal substrates by a spin coating process. LSTO substrate can be used for electrode. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)5 as raw materials, and acetic acid and diethylene glycol monomethyl ether as solvents. The coating thin films were sintered at temperature from 700 to 1000°C for 10 min in air. It was confirmed that the thin films on STO substrate sintered above 700°C were in the epitaxial growth because the 16 diffraction spots were observed on the pole figure using (121) reflection. The <130> and <310> direction of the thin film on STO were oriented with the c-axis in parallel to the substrate surface. However, the diffraction spots of thin film on LSTO substrate sintered at 700°C were corresponds to the expected pattern for (110).


Sign in / Sign up

Export Citation Format

Share Document