Development of real-time sketch-based on-the-spot process modeling and analysis system

2020 ◽  
Vol 54 ◽  
pp. 215-226 ◽  
Author(s):  
Hyunsoo Lee
Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2869
Author(s):  
Jiaen Wu ◽  
Kiran Kuruvithadam ◽  
Alessandro Schaer ◽  
Richie Stoneham ◽  
George Chatzipirpiridis ◽  
...  

The deterioration of gait can be used as a biomarker for ageing and neurological diseases. Continuous gait monitoring and analysis are essential for early deficit detection and personalized rehabilitation. The use of mobile and wearable inertial sensor systems for gait monitoring and analysis have been well explored with promising results in the literature. However, most of these studies focus on technologies for the assessment of gait characteristics, few of them have considered the data acquisition bandwidth of the sensing system. Inadequate sampling frequency will sacrifice signal fidelity, thus leading to an inaccurate estimation especially for spatial gait parameters. In this work, we developed an inertial sensor based in-shoe gait analysis system for real-time gait monitoring and investigated the optimal sampling frequency to capture all the information on walking patterns. An exploratory validation study was performed using an optical motion capture system on four healthy adult subjects, where each person underwent five walking sessions, giving a total of 20 sessions. Percentage mean absolute errors (MAE%) obtained in stride time, stride length, stride velocity, and cadence while walking were 1.19%, 1.68%, 2.08%, and 1.23%, respectively. In addition, an eigenanalysis based graphical descriptor from raw gait cycle signals was proposed as a new gait metric that can be quantified by principal component analysis to differentiate gait patterns, which has great potential to be used as a powerful analytical tool for gait disorder diagnostics.


2014 ◽  
Vol 08 (02) ◽  
pp. 209-227 ◽  
Author(s):  
Håkon Kvale Stensland ◽  
Vamsidhar Reddy Gaddam ◽  
Marius Tennøe ◽  
Espen Helgedagsrud ◽  
Mikkel Næss ◽  
...  

There are many scenarios where high resolution, wide field of view video is useful. Such panorama video may be generated using camera arrays where the feeds from multiple cameras pointing at different parts of the captured area are stitched together. However, processing the different steps of a panorama video pipeline in real-time is challenging due to the high data rates and the stringent timeliness requirements. In our research, we use panorama video in a sport analysis system called Bagadus. This system is deployed at Alfheim stadium in Tromsø, and due to live usage, the video events must be generated in real-time. In this paper, we describe our real-time panorama system built using a low-cost CCD HD video camera array. We describe how we have implemented different components and evaluated alternatives. The performance results from experiments ran on commodity hardware with and without co-processors like graphics processing units (GPUs) show that the entire pipeline is able to run in real-time.


2021 ◽  
Vol 7 (5) ◽  
pp. 4900-4913
Author(s):  
Li Huang ◽  
Jianqiu Hu

Objectives: With the rapid development of sports biomechanics, a new frontier discipline, the modeling and Simulation of human motion, as one of the cutting-edge research topics of sports biomechanics, is receiving more and more attention.. Methods: Based on this, this paper provides theoretical support for the analysis and research of foot stress in the process of training and applies it to guiding practice by using the analysis technology based on sports biomechanics and the method of foot pressure and simulation modeling and analysis system. Results: The results of the study showed that the injury of the athletes in the lower limbs accounted for about 46.7%, followed by the injury of the upper limbs and the injury of the trunk. In the lower extremity injury, the most common part of the foot joint is about 28.1%. Conclusion: Studies have shown that the changes in the force of the athlete’s foot after fatigue have not had the good stability before, the duration of each stage of the completion of the movement is changing, and the control of the ankle joint is decreasing, which greatly increases the foot joint. The possibility of injury.


2012 ◽  
Vol 23 (04) ◽  
pp. 831-851 ◽  
Author(s):  
GUOQIANG LI ◽  
XIAOJUAN CAI ◽  
SHOJI YUEN

Timed automata are commonly recognized as a formal behavioral model for real-time systems. For compositional system design, parallel composition of timed automata as proposed by Larsen et al. [22] is useful. Although parallel composition provides a general method for system construction, in the low level behavior, components often behave sequentially by passing control via communication. This paper proposes a behavioral model, named controller automata, to combine timed automata by focusing on the control passing between components. In a controller automaton, to each state a timed automaton is assigned. A timed automaton at a state may be preempted by the control passing to another state by a global labeled transition. A controller automaton properly extends the expressive power because of the stack, but this can make the reachability problem undecidable. Given a strict partial order over states, we show that this problem can be avoided and a controller automaton can be faithfully translated into a timed automaton.


2017 ◽  
Vol 985 ◽  
pp. 41-53 ◽  
Author(s):  
Rodrigo R. de Oliveira ◽  
Ricardo H.P. Pedroza ◽  
A.O. Sousa ◽  
Kássio M.G. Lima ◽  
Anna de Juan

Sign in / Sign up

Export Citation Format

Share Document