The influence of hydrogen absorption on the electrical resistivity and mechanical properties of Zr-based amorphous alloy

2013 ◽  
Vol 365 ◽  
pp. 27-32 ◽  
Author(s):  
Tong Liu ◽  
Hailong Shen ◽  
Tongwen Zhang ◽  
Wei Li ◽  
Chenggong Qin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Resistivity ◽  
Amorphous Alloy ◽  
Hydrogen Absorption

Effect of Hydrogen on Mechanical Properties of Pipeline API 5L X70 Steel

2011 ◽  
Vol 146 ◽  
pp. 213-225 ◽  
Author(s):  
T. Bellahcene ◽  
J. Capelle ◽  
Méziane Aberkane ◽  
Z. Azari
Keyword(s):  
Mechanical Properties ◽  
Hydrogen Embrittlement ◽  
Hydrogen Absorption ◽  
Fatigue Tests ◽  
The Finite Element Method ◽  
Effective Distance ◽  
Bending Tests ◽  
Fatigue Initiation ◽  
Api 5L X70 Steel ◽  
Special Soil

The aim of this work is to study the effects of hydrogen absorption on mechanical properties of pipe API 5L X70 steel. This study is conducted in special soil solution NS4 with pH 6.7 It show that the tensile properties like yield stress, ultimate strength and elongation at failure reduced under hydrogen embrittlement. Several fatigue tests (three (03) points bending tests) on roman tile specimens with notch are performed. Fatigue initiation is detected by acoustic emission. A comparison between specimens electrolytically charged with hydrogen and specimens without hydrogen absorption is made and it has been noted that fatigue initiation time is reduced when hydrogen embrittlement occurs. The field of elastoplastic stresses near the notch is computed by the finite-element method with the Abaqus software package. Effective distance and stress are calculated with the volumetric approach and the Notch intensity Factor of the roman tile specimen is determined for each loading value used in our tests.

Inoculation and Fading of Sr-Modified A356.2 Aluminum Alloy in Squeeze Casting

2016 ◽  
Vol 850 ◽  
pp. 671-678
Author(s):  
Jian Wei Niu ◽  
Lie Jun Li ◽  
Hai Jun Liu ◽  
Ji Xiang Gao ◽  
Chuan Dong Ren
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Aluminum Alloy ◽  
Hydrogen Absorption ◽  
Deleterious Effect ◽  
Squeeze Casting ◽  
Eutectic Silicon ◽  
Direct Reading ◽  
Air Bag ◽  
Fading Rate

The inoculation and fading behavior of Sr-modified aluminum alloy A356. 2 were studied for air bag bracket produced by squeeze casting. The effects of Sr, P, B contents and casting temperature on the microstructure and eutectic silicon morphology in different periods of inoculation were investigated by SEM and direct-reading Spectrometer. The influence of inoculation fading rate and addition of Sr on the casting mechanical properties and hydrogen absorption was studied. The experimental results showed that the inoculation process was completed in 1 h, and the eutectic silicon morphology can be maintained in almost subsequent 40 h after the addition of Sr. The fading rate decreased appreciably with the increase of casing temperature, P and B contents. The deleterious effect of the inoculation fading of Sr on the casting mechanical property can be compensated by the squeeze casting.

Sign in / Sign up

Export Citation Format

Share Document