Annealing effects on the microstructure and mechanical properties of hot-rolled 14Cr-ODS steel

2015 ◽  
Vol 465 ◽  
pp. 268-279 ◽  
Author(s):  
R. Gao ◽  
T. Zhang ◽  
H.L. Ding ◽  
Y. Jiang ◽  
X.P. Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Ods Steel ◽  
Microstructure And Mechanical Properties ◽  
Annealing Effects ◽  
Hot Rolled

scholarly journals Microstructure and Mechanical Properties of Novel Quasibinary Al-Cu-Yb and Al-Cu-Gd Alloys

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 476
Author(s):  
Sayed Amer ◽  
Ruslan Barkov ◽  
Andrey Pozdniakov
Keyword(s):  
Mechanical Properties ◽  
Tensile Properties ◽  
Mechanism Of Action ◽  
Annealing Temperature ◽  
Eutectic Reaction ◽  
Solidification Process ◽  
Annealed State ◽  
Microstructure And Mechanical Properties ◽  
Cold Rolled ◽  
Hot Rolled

Microstructure of Al-Cu-Yb and Al-Cu-Gd alloys at casting, hot-rolled -cold-rolled and annealed state were observed; the effect of annealing on the microstructure was studied, as were the mechanical properties and forming properties of the alloys, and the mechanism of action was explored. Analysis of the solidification process showed that the primary Al solidification is followed by the eutectic reaction. The second Al8Cu4Yb and Al8Cu4Gd phases play an important role as recrystallization inhibitor. The Al3Yb or (Al, Cu)17Yb2 phase inclusions are present in the Al-Cu-Yb alloy at the boundary between the eutectic and aluminum dendrites. The recrystallization starting temperature of the alloys is in the range of 250–350 °C after rolling with previous quenching at 590 and 605 °C for Al-Cu-Yb and Al-Cu-Gd, respectively. The hardness and tensile properties of Al-Cu-Yb and Al-Cu-Gd as-rolled alloys are reduced by increasing the annealing temperature and time. The as-rolled alloys have high mechanical properties: YS = 303 MPa, UTS = 327 MPa and El. = 3.2% for Al-Cu-Yb alloy, while YS = 290 MPa, UTS = 315 MPa and El. = 2.1% for Al-Cu-Gd alloy.

scholarly journals Microstructure and Mechanical Properties of 14Cr-ODS Steels with Zr Addition

2019 ◽  
Vol 38 (2019) ◽  
pp. 404-410 ◽  
Author(s):  
Weijuan Li ◽  
Haijian Xu ◽  
Xiaochun Sha ◽  
Jingsong Meng ◽  
Zhaodong Wang
Keyword(s):  
Mechanical Properties ◽  
Hot Isostatic Pressing ◽  
Oxide Dispersion Strengthened ◽  
Nominal Composition ◽  
Ods Steel ◽  
Zr Addition ◽  
Microstructure And Mechanical Properties ◽  
The Matrix ◽  
Ods Steels ◽  
The Impact

AbstractIn this study, oxide dispersion strengthened (ODS) ferritic steels with nominal composition of Fe–14Cr–2W–0.35Y2O3 (14Cr non Zr-ODS) and Fe–14Cr–2W–0.3Zr–0.35Y2O3 (14Cr–Zr-ODS) were fabricated by mechanical alloying (MA) and hot isostatic pressing (HIP) technique to explore the impact of Zr addition on the microstructure and mechanical properties of 14Cr-ODS steels. Microstructure characterization revealed that Zr addition led to the formation of finer oxides, which was identified as Y4Zr3O12, with denser dispersion in the matrix. The ultimate tensile strength (UTS) of the non Zr-ODS steel is about 1201 MPa, but UTS of the Zr-ODS steel increases to1372 MPa, indicating the enhancement of mechanical properties by Zr addition.

Study of processing, microstructure and mechanical properties of hot rolled ultra-high strength steel

2018 ◽  
Vol 46 (6) ◽  
pp. 535-541 ◽  
Author(s):  
Tihe Zhou ◽  
David Overby ◽  
Peter Badgley ◽  
Chris Martin-Root ◽  
Xiang Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Microstructure And Mechanical Properties ◽  
Ultra High Strength Steel ◽  
Hot Rolled
Sign in / Sign up

Export Citation Format

Share Document