Determination of preferential binder oxidation in HTGR matrix material subjected to high temperature steam

This paper proposes a new kind of system for effective indirect solar cooking by utilizing a novel Fresnel lens. A semi-cylindrical vessel (solar boiler) for producing steam and a jacketed cooker was designed, fabricated and tested experimentally for cooking applications. The solar boiler produced high temperature steam of 146°C and pressure of 3.15 barg which was used for cooking purposes. The international standard for evaluating cooker performance was implemented on this system and heating power was determined to be 51.2 Watt at a temperature difference of 50°C. The maximum energy and exergy efficiencies for boiler were found to be 30.18 % and 2.86%, respectively. This represents a 92% increment in energy efficiency and 128.8% increment in exergy efficiency as compared to solar parabolic cookers. The maximum energy efficiency of 5.02% and maximum exergy efficiency of 0.378% were achieved in this cooking system.

Download Full-text

Polishing process effect on the image of dispersed precipitates

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100112646 ◽

1984 ◽

Vol 42 ◽

pp. 534-535

Author(s):

C.T. Hu ◽

C.W. Allen

Keyword(s):

Matrix Material ◽

Specimen Preparation ◽

Second Phase ◽

Precipitate Particle ◽

Polishing Process ◽

Second Phase Particles ◽

The Matrix ◽

Surface Profiles ◽

Thinning Process

One important problem in determination of precipitate particle size is the effect of preferential thinning during TEM specimen preparation. Figure 1a schematically represents the original polydispersed Ni3Al precipitates in the Ni rich matrix. The three possible type surface profiles of TEM specimens, which result after electrolytic thinning process are illustrated in Figure 1b. c. & d. These various surface profiles could be produced by using different polishing electrolytes and conditions (i.e. temperature and electric current). The matrix-preferential-etching process causes the matrix material to be attacked much more rapidly than the second phase particles. Figure 1b indicated the result. The nonpreferential and precipitate-preferential-etching results are shown in Figures 1c and 1d respectively.

Download Full-text

Phase transformation and layer evolution in molybdenum disilicide-silicon carbide nanolayered coatings

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100170426 ◽

1994 ◽

Vol 52 ◽

pp. 538-539

Author(s):

H. Kung ◽

T. R. Jervis ◽

J.-P. Hirvonen ◽

M. Nastasi ◽

T. E. Mitchell ◽

...

Keyword(s):

Phase Transformation ◽

High Temperature ◽

Oxidation Resistance ◽

Elevated Temperatures ◽

Matrix Material ◽

Molybdenum Disilicide ◽

High Temperature Strength ◽

Cross Sectional ◽

Good Oxidation Resistance ◽

Structural Applications

MoSi2 is a potential matrix material for high temperature structural composites due to its high melting temperature and good oxidation resistance at elevated temperatures. The two major drawbacksfor structural applications are inadequate high temperature strength and poor low temperature ductility. The search for appropriate composite additions has been the focus of extensive investigations in recent years. The addition of SiC in a nanolayered configuration was shown to exhibit superior oxidation resistance and significant hardness increase through annealing at 500°C. One potential application of MoSi2- SiC multilayers is for high temperature coatings, where structural stability ofthe layering is of major concern. In this study, we have systematically investigated both the evolution of phases and the stability of layers by varying the heat treating conditions.Alternating layers of MoSi2 and SiC were synthesized by DC-magnetron and rf-diode sputtering respectively. Cross-sectional transmission electron microscopy (XTEM) was used to examine three distinct reactions in the specimens when exposed to different annealing conditions: crystallization and phase transformation of MoSi2, crystallization of SiC, and spheroidization of the layer structures.

Download Full-text