Strontium ions capturing in aqueous media using exfoliated titanium aluminum carbide (Ti2AlC MAX phase)

2021 ◽  
pp. 152916
Author(s):  
Asif Shahzad ◽  
Jae-Min Oh ◽  
Kashif Rasool ◽  
Jiseon Jang ◽  
Bolam Kim ◽  
...  
2008 ◽  
Vol 62 (10-11) ◽  
pp. 1480-1483 ◽  
Author(s):  
Shinobu Hashimoto ◽  
Masaru Takeuchi ◽  
Koji Inoue ◽  
Sawao Honda ◽  
Hideo Awaji ◽  
...  

2016 ◽  
Vol 42 (13) ◽  
pp. 14984-14991 ◽  
Author(s):  
Xiaochen Huang ◽  
Yi Feng ◽  
Gang Qian ◽  
Yang Wang ◽  
Xuebin Zhang

2011 ◽  
Vol 94 (10) ◽  
pp. 3460-3466 ◽  
Author(s):  
Haibin Zhang ◽  
Volker Presser ◽  
Klaus Georg Nickel ◽  
Christoph Berthold ◽  
Yanchun Zhou

2014 ◽  
Vol 29 (8) ◽  
pp. 864
Author(s):  
CHEN Chen ◽  
ZHANG Hai-Bin ◽  
PENG Shu-Min ◽  
ZHAO Lin-Jie ◽  
ZHU Jian-Guo

2006 ◽  
Vol 0 (0) ◽  
pp. 060623005134003-??? ◽  
Author(s):  
Zhijun Lin ◽  
Mujin Zhuo ◽  
Yanchun Zhou ◽  
Meishuan Li ◽  
Jingyang Wang

2021 ◽  
Author(s):  
Qiong Wu ◽  
Yihao Wang ◽  
Pengfei Li ◽  
Shunhua Chen ◽  
Fufa Wu

The electrochemical properties of MXene titanium carbide Ti3C2, which has received much attention in the application of electrode materials for supercapacitors, are affected by the different morphology of its precursor....


2012 ◽  
Vol 510 ◽  
pp. 645-649
Author(s):  
Ping Wang

Ternary titanium aluminum carbide powder was prepared by pressureless sintering at different temperature using elemental powder mixture of Ti, Al, and active carbon whose molar ratios was 3Ti/1.1Al/1.8C and effects of doping Si were discussed from 3.0Ti/1.0Al/0.1Si/1.8C and 3.0Ti/0.9Al/0.2S/1.8C. X-ray diffractions (XRD) patterns were used to detect the phase composition and scanning electron microscope (SEM) patterns were observed to investigate the microstructure of samples respectively. Results showed that Ti2AlC and Ti3AlC2which had obvious layered structure were synthesized by pressureless sintering of 3Ti/1.1Al/1.8C at 1300°C-1500°C. However, the samples doping Si were made of Ti2AlC, Ti3AlC2and Ti3SiC2. When the amount of Si-doped increased and Al/Si decreased, the amount of Ti3AlC2and Ti3SiC2went up with Ti2AlC going down. Interestingly, the character of layered structure became unconspicuous at same temperature. Moreover, the mechanism that doping Si was not helpful to form Ti2AlC but Ti3AlC2was explained.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
H. Ahmad ◽  
M. F. M. Azri ◽  
R. Ramli ◽  
M. Z. Samion ◽  
N. Yusoff ◽  
...  

AbstractIn this work, mode-locked thulium-doped fiber lasers operating in the 2 µm wavelength region were demonstrated using tantalum aluminum carbide (Ta2AlC)-based saturable absorbers (SAs) utilizing the evanescent wave interaction. The Ta2AlC MAX Phase was prepared by dissolving the Ta2AlC powder in isopropyl alcohol and then deposited onto three different evanescent field-based devices, which were the tapered fiber, side-polished fiber, and arc-shaped fiber. Flame-brushing and wheel-polishing techniques were used to fabricate the tapered and arc-shaped fibers, respectively, while the side-polished fiber was purchased commercially. All three SA devices generated stable mode-locked pulses at center wavelengths of 1937, 1931, and 1929 nm for the tapered, side-polished, and arc-shaped fibers. The frequency of the mode-locked pulses was 10.73 MHz for the tapered fiber, 9.58 MHz for the side-polished fiber, and 10.16 MHz for the arc-shaped fiber. The measured pulse widths were 1.678, 1.734, and 1.817 ps for each of the three SA devices. The long-term stability of the mode-locked lasers was tested for each configuration over a 2-h duration. The lasers also showed little to no fluctuations in the center wavelengths and the peak optical intensities, demonstrating a reliable, ultrafast laser system.


Sign in / Sign up

Export Citation Format

Share Document