Change in nanoindentation hardness of polycrystalline tungsten irradiated with Fe ions or electrons by hydrogen gas charging

Earlier investigations have shown that there is a preponderance of negative velocities in the hydrogen gas at high latitudes, and that in certain areas very little low-velocity gas occurs. In the region 100° <l< 250°, + 40° <b< + 85°, there appears to be a disturbance, with velocities between - 30 and - 80 km/sec. This ‘streaming’ involves about 3000 (r/100)2solar masses (rin pc). In the same region there is a low surface density at low velocities (|V| < 30 km/sec). About 40% of the gas in the disturbance is in the form of separate concentrations superimposed on a relatively smooth background. The number of these concentrations as a function of velocity remains constant from - 30 to - 60 km/sec but drops rapidly at higher negative velocities. The velocity dispersion in the concentrations varies little about 6·2 km/sec. Concentrations at positive velocities are much less abundant.

Download Full-text

Annealing Of Radiation Damage in Tungsten

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069053 ◽

1970 ◽

Vol 28 ◽

pp. 412-413

Author(s):

Robert C. Rau ◽

John Moteff

Keyword(s):

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Radiation Damage ◽

Thermal Annealing ◽

Neutron Fluence ◽

Dislocation Loops ◽

Defect Clusters ◽

Polycrystalline Tungsten ◽

Transmission Electron ◽

Radiation Induced

Transmission electron microscopy has been used to study the thermal annealing of radiation induced defect clusters in polycrystalline tungsten. Specimens were taken from cylindrical tensile bars which had been irradiated to a fast (E > 1 MeV) neutron fluence of 4.2 × 1019 n/cm2 at 70°C, annealed for one hour at various temperatures in argon, and tensile tested at 240°C in helium. Foils from both the unstressed button heads and the reduced areas near the fracture were examined.Figure 1 shows typical microstructures in button head foils. In the unannealed condition, Fig. 1(a), a dispersion of fine dot clusters was present. Annealing at 435°C, Fig. 1(b), produced an apparent slight decrease in cluster concentration, but annealing at 740°C, Fig. 1(C), resulted in a noticeable densification of the clusters. Finally, annealing at 900°C and 1040°C, Figs. 1(d) and (e), caused a definite decrease in cluster concentration and led to the formation of resolvable dislocation loops.

Download Full-text

ELNES of Iron Compounds

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100133734 ◽

1990 ◽

Vol 48 (2) ◽

pp. 28-29

Author(s):

Hiroki Kurata ◽

Kazuhiro Nagai ◽

Seiji Isoda ◽

Takashi Kobayashi

Keyword(s):

Energy Loss ◽

Metal Ions ◽

Energy Resolution ◽

Transition Metal Oxides ◽

Local Symmetry ◽

Iron Compounds ◽

Fine Structures ◽

Electron Energy Loss ◽

Fe Ions ◽

Electron Energy Loss Spectra

Electron energy loss spectra of transition metal oxides, which show various fine structures in inner shell edges, have been extensively studied. These structures and their positions are related to the oxidation state of metal ions. In this sence an influence of anions coordinated with the metal ions is very interesting. In the present work, we have investigated the energy loss near-edge structures (ELNES) of some iron compounds, i.e. oxides, chlorides, fluorides and potassium cyanides. In these compounds, Fe ions (Fe2+ or Fe3+) are octahedrally surrounded by six ligand anions and this means that the local symmetry around each iron is almost isotropic.EELS spectra were obtained using a JEM-2000FX with a Gatan Model-666 PEELS. The energy resolution was about leV which was mainly due to the energy spread of LaB6 -filament. The threshole energies of each edges were measured using a voltage scan module which was calibrated by setting the Ni L3 peak in NiO to an energy value of 853 eV.

Download Full-text

Hydrogen Gas as a Fuel for Domestic Purposes

Scientific American ◽

10.1038/scientificamerican08031861-74 ◽

1861 ◽

Vol 5 (5) ◽

pp. 74-74

Keyword(s):

Hydrogen Gas

Download Full-text

Investigation on the Hydrogen Gas Sensor Based on Exothermicity Reaction by Hydrogen Absorption into the Pd Film

IEEJ Transactions on Sensors and Micromachines ◽

10.1541/ieejsmas.131.148 ◽

2011 ◽

Vol 131 (4) ◽

pp. 148-153

Author(s):

Noriaki Takashima ◽

Mitsuteru Kimura

Keyword(s):

Gas Sensor ◽

Hydrogen Absorption ◽

Hydrogen Gas

Download Full-text

PERLAKUAN ETHYL METHANE SULFONATE (EMS) PADA ENTEROBACTER AEROGENES AY-2 DARI LIMBAH METAN FERMENTASI UNTUK PENINGKATAN PRODUKSI GAS HIDROGEN

Jurnal Rekayasa Lingkungan ◽

10.29122/jrl.v5i1.1875 ◽

2018 ◽

Vol 5 (1) ◽

Author(s):

Mahyudin Abdul Rachman

Keyword(s):

Metabolic Pathway ◽

Acid Production ◽

Double Mutant ◽

Enterobacter Aerogenes ◽

H2 Production ◽

Hydrogen Gas ◽

Survival Ratio ◽

Ethyl Methane Sulfonate ◽

Methane Sulfonate ◽

Ethyl Methane

Enterobacter aerogenes AY-2 mutant is known for hydrogen gas producer which ws obtained from the sludge of methane fermentation and the yield is 1.5 fold higher than wildtype. Hydrogen gas production can be gain via NADH oxidation in anaerobic metabolic pathway by blocking organic acid production. Metabolic pathway can be changed by mutagenesis. Enterobacter aerogenes AY-2 mutated with ethyl methane sulfonate in logarithmic phase with consentration 10, 11, 12, 13, 14 and 15 μl/ml cell suspention during 120 minute. Mutation that result lowest survival ratio (0,01%) was 14 μl EMS/ml cell suspention is repeated with variation incubation time, 30, 60, 90 and 120 minute. 166 double mutant colony has been collected and choosen randomly. The choosen 43 colony was fermented in glycerol complex medium for determining ten double mutant with the highest H2 production. Double mutant AD-H43 is a highest H2 producer that increase 20% H2 production from AY-2 and has a decrease lactid acid production, 31% less from AY-2. Increasing H2 production in double mutant AD-H43 is caused by lactate dehydrogenase deffi cient.Keywords: Enterobacter aerogenes AY-2, ethyl methane sulfonate (EMS), H2 and methane sludge

Download Full-text