The flexural behavior of Incinerated Bio-Medical Waste Ash (IBWA) – Ground Granulated Blast Furnace Slag (GGBS) based Reinforced Geopolymer Concrete (RGPC) beams with Waste Glass Powder (WGP) as fine aggregate is explored in this research. The fine aggregate (M-Sand) is substituted by varying the waste glass powder as 0 percent, 5 percent, 10 percent, 15 percent, 20 percent, 25 percent, 30 percent, 35 percent, 40 percent, 45 percent, and 50 percent, and the mixture is cured under atmospheric curing. The impact of the WGP weight percentage on the flexural behavior of GPC beams is analyzed. The conduct of RGPC beams varies from that of ordinary Portland Concrete (OPC) beams, which is defined and examined. Deflection, ductility factor, flexural strength, and toughness index were measured as flexural properties for beams. In contrast to the reference beams, the RGPC beams containing 50% Waste Glass Powder as fine aggregate demonstrated a major increase in cracking resistance, serviceability, and ductility, according to the experimental finding. The RGPC beam without WGP ended in failure with a brittle manner whereas those beams with WGP encountered ductile failure. The RGPC beams' load ability improved by up to 50% as the weight percentage of WGP was enhanced.
