Flexural Behavior of Reinforced Concrete Sandwich Wall Panels Enabled by Fiber-Reinforced Polymer (FRP) Connectors

2021 ◽  
pp. 147-166
Author(s):  
Junqi Huang ◽  
Sushil Kumar ◽  
Jian-Guo Dai
Keyword(s):  
Reinforced Concrete ◽  
Fiber Reinforced Polymer ◽  
Flexural Behavior ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Wall Panels ◽  
Sandwich Wall

Flexural Behavior of Reinforced-Concrete (RC) Beams Strengthened with Hemp Fiber-Reinforced Polymer (FRP) Composites

2016 ◽  
Vol 860 ◽  
pp. 156-159
Author(s):  
Seyha Yinh ◽  
Qudeer Hussain ◽  
Winyu Rattanapitikon ◽  
Amorn Pimanmas
Keyword(s):  
Reinforced Concrete ◽  
Fiber Reinforced Polymer ◽  
Flexural Behavior ◽  
Rc Beams ◽  
Fiber Reinforced ◽  
Hemp Fiber ◽  
Flexural Strengthening ◽  
Frp Composites ◽  
Reinforced Polymer ◽  
Fiber Thickness

This experimental study has been conducted on the efficiency of epoxy-bonded hemp fiber reinforced polymer (FRP) composites in flexural strengthening of reinforced concrete (RC) beams. A total of five RC beams were cast and tested up to failure. The test parameters included fiber thickness and strengthening configuration. The experimental results show the capability of hemp FRP composites to increase the loading capacity in flexure of RC beams compared with the un-strengthened beam. The enhancement of ultimate load becomes more significant as the fiber thickness is increased. The effectiveness of strengthened beams in U-wrapped scheme is found greater than strengthened beams in bottom-only scheme. Based on results, it indicates that hemp FRP has a potential to considerably increase the strength and stiffness of the original RC beam.

Exploratory experimental study on flexural behavior of CFRP-reinforced concrete beams subjected to acidic loading effect

2018 ◽  
Vol 21 (14) ◽  
pp. 2184-2197 ◽  
Author(s):  
Hai-Yang Luan ◽  
Ying-Fang Fan ◽  
An Chen ◽  
Shi-Yi Zhang
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fiber ◽  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Flexural Behavior ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This article presents an exploratory study on the flexural behavior of carbon fiber–reinforced polymer–reinforced concrete beams subjected to acidic loading effect. To this end, an artificial acid rain with a pH level of 1.5 was prepared by mixing sulfate and nitric acid solutions. Eight reinforced concrete beams with/without carbon fiber–reinforced polymer applications were constructed and conditioned using the artificial acid rain. During conditioning, bending loads were applied to the top surfaces of the beams to simulate the acidic loading action. Three carbon fiber–reinforced polymer reinforcement schemes (corrosion reinforcement, reinforcement corrosion, and cracking reinforcement) were considered. After conditioning, the length and quantity of initial cracks in the beams were recorded. A combined ultrasonic–rebound method was then adopted to measure the strength and corrosion depth of the concrete and evaluate the beams’ integrity. Next, four-point bending tests were conducted to study the beams’ flexural behavior. It can be concluded that all beams deteriorated with the increase of the corrosion time. Carbon fiber–reinforced polymer–reinforced concrete beams performed better than normal reinforced concrete beams under the acidic loading effect. The initial cracks can influence the flexural behavior of carbon fiber–reinforced polymer–reinforced concrete beams.

Flexural behavior of corroded reinforced concrete beam strengthened with jute fiber reinforced polymer

2020 ◽  
pp. 136943322097478
Author(s):  
Abu Sayed Mohammad Akid ◽  
Qudrati Al Wasiew ◽  
Md. Habibur Rahman Sobuz ◽  
Touhidur Rahman ◽  
Vivian WY Tam
Keyword(s):  
Reinforced Concrete ◽  
Ultimate Load ◽  
Reinforced Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Flexural Behavior ◽  
Jute Fiber ◽  
Rc Beams ◽  
Test Results ◽  
Fiber Reinforced ◽  
Reinforced Polymer

Fiber-reinforced polymer (FRP) is a revolutionary breakthrough in the history of structural engineering innovation due to its unique characteristics to strengthen and repair the deficient reinforced concrete structures. This paper aimed at evaluating the flexural characteristics of jute fiber reinforced polymer (JFRP) bonded reinforced concrete beams. The influence of the test variables comprised of strengthening scheme and corrosion rate for reinforced concrete (RC) beams. The experimental study comprised of casting six RC beams and testing them in flexure loading. To determine the flexural response of RC beams, three beams were fabricated with JFRP laminate having a level of corrosion of 0%, 7.5%, and 15%, whereas three beams were designated as control beams having same corrosion levels with no JFRP. Test results indicated that all JFRP strengthened beams exhibited increased ultimate load, yield load, first cracking load, and lower ductility index compared to control beams. The results also revealed that JFRP strengthening technique improved the flexural strength of the corroded beams efficiently, albeit the ultimate load of the beams diminished with higher corrosion level. Analytical calculations were carried out for quantifying the flexural characteristics and mass loss of beams which provided a good agreement with the test results.

Simulation Behavior of Flexure in Reinforced Concrete Beam with Opening Reinforced with Glass Fiber Reinforced Polymer (GFRP)

2016 ◽  
Vol 857 ◽  
pp. 421-425
Author(s):  
Saif M. Thabet ◽  
S.A. Osman
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Glass Fiber ◽  
Concrete Beam ◽  
Reinforced Concrete Beam ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

This paper presents an investigation into the flexural behaviour of reinforced concrete beam with opening reinforced with two different materials i.e., steel and Glass Fiber Reinforced Polymer (GFRP). Comparison study between the two different materials were carried out and presented in this study through non-linear Finite Element Method (FEM) using the commercial ABAQUS 6.10 software package. The performance of the opening beam reinforced with GFRP is influenced by several key parameters. Simulation analyses were carried out to determine the behavior of beam with opening subjected to monotonic loading. The main parameters considered in this study are size of opening and reinforcement diameter. The results show that GFRP give 23%-29% more ductility than steel reinforcement. The result also shows when the size of opening change from 200mm to 150mm or from 150mm to 100mm the ultimate load capacity increase by 15%. In general, good agreement between the Finite Element (FE) simulation and the available experimental result has been obtained.

Sign in / Sign up

Export Citation Format

Share Document