Anterior segment characteristics in normal and keratoconus eyes evaluated with a combined Scheimpflug/Placido corneal imaging device

Anterior segment optical coherence tomography (AS-OCT) was recently developed and has become a crucial tool in clinical practice. AS-OCT is a noncontact imaging device that provides the detailed structure of the anterior part of the eyes. In this review, the author will discuss the various clinical applications of AS-OCT, such as the normal findings, tear meniscus measurement, ocular surface disease (e.g., pterygium, pinguecula, and scleromalacia), architectural analysis after cataract surgery, post-LASIK keratectasia, Descemet’s membrane detachment, evaluation of corneal graft after keratoplasty, corneal deposits (corneal dystrophies and corneal verticillata), keratitis, anterior segment tumors, and glaucoma evaluation (angle assessment, morphological analysis of the filtering bleb after trabeculectomy, or glaucoma drainage device implantation surgery). The author also presents some interesting cases demonstrated via AS-OCT.

Download Full-text

Repeatability of whole-cornea measurements using an anterior segment imaging device based on OCT and Placido-disk

Expert Review of Medical Devices ◽

10.1080/17434440.2017.1281739 ◽

2017 ◽

Vol 14 (2) ◽

pp. 169-175 ◽

Cited By ~ 3

Author(s):

Noelia Martínez-Albert ◽

José J. Esteve-Taboada ◽

Robert Montés-Micó

Keyword(s):

Anterior Segment ◽

Imaging Device ◽

Anterior Segment Imaging

Download Full-text

Ultimate resolution and information in electron microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100086787 ◽

1991 ◽

Vol 49 ◽

pp. 496-497

Author(s):

D. Van Dyck

Keyword(s):

Electron Microscopy ◽

Electron Microscope ◽

Transfer Function ◽

Information Transfer ◽

Communication Channel ◽

Structural Information ◽

Information Rate ◽

Noise Power ◽

Signal Power ◽

Imaging Device

An (electron) microscope can be considered as a communication channel that transfers structural information between an object and an observer. In electron microscopy this information is carried by electrons. According to the theory of Shannon the maximal information rate (or capacity) of a communication channel is given by C = B log2 (1 + S/N) bits/sec., where B is the band width, and S and N the average signal power, respectively noise power at the output. We will now apply to study the information transfer in an electron microscope. For simplicity we will assume the object and the image to be onedimensional (the results can straightforwardly be generalized). An imaging device can be characterized by its transfer function, which describes the magnitude with which a spatial frequency g is transferred through the device, n is the noise. Usually, the resolution of the instrument ᑭ is defined from the cut-off 1/ᑭ beyond which no spadal information is transferred.

Download Full-text

Development of imaging plate for a TEM and its characteristics

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100152471 ◽

1989 ◽

Vol 47 ◽

pp. 100-101

Author(s):

N. Mori ◽

T. Oikawa ◽

Y. Harada ◽

J. Miyahara ◽

T. Matsuo

Keyword(s):

Dynamic Range ◽

Protective Layer ◽

High Sensitivity ◽

Imaging Plate ◽

Phosphor Layer ◽

Imaging Device ◽

X Ray Imaging ◽

New Type ◽

Basic Characteristics ◽

Reading System

The Imaging Plate (IP) is a new type imaging device, which was developed for diagnostic x ray imaging. We have reported that usage of the IP for a TEM has many merits; those are high sensitivity, wide dynamic range, and good linearity. However in the previous report the reading system was prototype drum-type-scanner, and IP was also experimentally made, which phosphor layer was 50μm thick with no protective layer. So special care was needed to handle them, and they were used only to make sure the basic characteristics. In this article we report the result of newly developed reading, printing system and high resolution IP for practical use. We mainly discuss the characteristics of the IP here. (Precise performance concerned with the reader and other system are reported in the other article.)Fig.1 shows the schematic cross section of the IP. The IP consists of three parts; protective layer, phosphor layer and support.

Download Full-text