scholarly journals Assessing the potential of molten carbonate fuel cell-based schemes for carbon capture in natural gas-fired combined cycle power plants

2020 ◽  
Vol 448 ◽  
pp. 227223 ◽  
Author(s):  
M. Spinelli ◽  
D. Di Bona ◽  
M. Gatti ◽  
E. Martelli ◽  
F. Viganò ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Carbon Capture ◽  
Power Plants ◽  
Combined Cycle ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Carbonate Fuel Cell

Using Molten Carbonate Fuel Cell Systems for CO2 With a Natural Gas Combined Cycle Operating at Part Load

2019 ◽  
Author(s):  
Robert Flores ◽  
Jack Brouwer
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Natural Gas ◽  
Carbon Capture ◽  
Combined Cycle ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Part Load ◽  
Natural Gas Combined Cycle ◽  
Carbonate Fuel Cell

Abstract Traditional carbon capture technology has been shown to effectively capture emissions, but at a cost of reducing power plant output. Molten carbonate fuel cell technology (MCFC) has the potential to be able to concentrate plant carbon emissions into a gas stream that is suitable for storage while boosting total plant power output. When considering this type of technology, the original purpose and function of the power plant must be considered. In particular, gas turbines (GT) based natural gas combined cycle (NGCC), which are capable of dynamic load following operation, are likely to need to maintain operational flexibility. This work explores the retrofit of an existing GT with MCFC technology for carbon capture when the plant is operated at part load. Physical models for major plant components are built and used to select optimal operating set points such that operating cost is minimized. Special attention is given to ensuring feasible operation across all engine components. The results show MCFC operational parameters that minimize change in fuel cell operating conditions when the gas turbine is operated at part load.

scholarly journals Coal Cell

2003 ◽  
Vol 125 (12) ◽  
pp. 42-44 ◽  
Author(s):  
Jeffrey Winters
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Power Plants ◽  
The United States ◽  
Combined Cycle ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Integrated Gasification Combined Cycle ◽  
Integrated Gasification ◽  
Carbonate Fuel Cell

This article focuses on coal mining that is incredibly disruptive, and coal is heavy and bulky, involving rumbling freight trains to transport it. The idea that fuel cells are every bit as clean as coal is dirty is just as widespread. Fuel cells, after all, take hydrogen and oxygen, and combine those elements to make electricity and water. The program, called the Clean Coal Technology Program, was, in part, an effort to promote commercial-scale integrated gasification combined-cycle (IGCC) coal power plants in the United States. Molten carbonate fuel cell stacks routinely weigh in at 250 kW. For the Wabash River demonstration, eight stacks will be combined for 2 MW. It will be the largest carbonate fuel cell power plant operating on coal in the world. FuelCell Energy has been planning for this sort of project for more than 20 years.

Molten Carbonate Fuel Cell Performance for CO2 Capture from Natural Gas Combined Cycle Flue Gas

2020 ◽  
Vol 167 (6) ◽  
pp. 064505 ◽  
Author(s):  
Jonathan Rosen ◽  
Timothy Geary ◽  
Abdelkader Hilmi ◽  
Rodrigo Blanco-Gutierrez ◽  
Chao-Yi Yuh ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Co2 Capture ◽  
Flue Gas ◽  
Combined Cycle ◽  
Molten Carbonate Fuel Cell ◽  
Molten Carbonate ◽  
Fuel Cell Performance ◽  
Natural Gas Combined Cycle ◽  
Carbonate Fuel Cell

scholarly journals A novel hybrid liquefied natural gas process with absorption refrigeration integrated with molten carbonate fuel cell

2021 ◽  
Author(s):  
Mehdi Mehrpooya ◽  
Parimah Bahramian ◽  
Fathollah Pourfayaz ◽  
Hadi Katooli ◽  
Mostafa Delpisheh
Keyword(s):  
Energy Consumption ◽  
Fuel Cell ◽  
Natural Gas ◽  
Hybrid System ◽  
Liquefied Natural Gas ◽  
Molten Carbonate Fuel Cell ◽  
Cooling Load ◽  
Absorption Refrigeration ◽  
Molten Carbonate ◽  
Carbonate Fuel Cell

Abstract The production of liquefied natural gas (LNG) is a high energy-consuming process. The study of ways to reduce energy consumption and consequently to reduce operational costs is imperative. Toward this purpose, this study proposes a hybrid system adopting a mixed refrigerant for the liquefaction of natural gas that is precooled with an ammonia/water absorption refrigeration (AR) cycle utilizing the exhaust heat of a molten carbonate fuel cell, 700°C and 2.74 bar, coupled with a gas turbine and a bottoming Brayton super-critical carbon dioxide cycle. The inauguration of the ammonia/water AR cycle to the LNG process increases the cooling load of the cycle by 10%, providing a 28.3-MW cooling load duty while having a 0.45 coefficient of performance. Employing the hybrid system reduces energy consumption, attaining 85% overall thermal efficiency, 53% electrical efficiency and 35% fuel cell efficiency. The hybrid system produces 6300 kg.mol.h−1 of LNG and 146.55 MW of electrical power. Thereafter, exergy and sensitivity analyses are implemented and, accordingly, the fuel cell had an 83% share of the exergy destruction and the whole system obtained a 95% exergy efficiency.

Performance Evaluation of a Molten Carbonate Fuel Cell/Micro Gas Turbine Hybrid System With Oxy-Combustion Carbon Capture

2017 ◽  
Author(s):  
Ji Ho Ahn ◽  
Tong Seop Kim
Keyword(s):  
Carbon Dioxide ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Carbon Capture ◽  
Molten Carbonate Fuel Cell ◽  
Design Parameters ◽  
Molten Carbonate ◽  
Micro Gas Turbine ◽  
Carbonate Fuel Cell

Owing to the increasing consumption of fossil fuels and emission of greenhouse gases, interests in highly efficient and low carbon emitting power systems are growing fast. Several research groups have been suggesting advanced systems based on fuel cells and have also been applying carbon capture and storage technology to satisfy the demand for clean energy. In this study, the performance of a hybrid system, which is a combination of a molten carbonate fuel cell (MCFC) with oxy-combustion carbon capture and an indirectly fired micro gas turbine (MGT) was predicted. A 2.5MW MCFC system that is used in commercial applications was used as the reference system so that the results of the study could be applicable to practical situations. The ambient pressure type hybrid system was modeled by referring to the design parameters of an MGT that is currently being developed. A semi-closed type design characterized by flow recirculation was adopted for this hybrid system. A part of the recirculating gas is converted into liquefied carbon dioxide and captured for storage at the carbon separation unit. Almost 100% carbon dioxide capture is possible with this system. In these systems, the output power of the fuel cell is larger than in the normal hybrid system without carbon capture because the partial pressure of carbon dioxide increases. The increased cell power partially compensates for the power loss due to the carbon capture and MGT power reduction. The dependence of net system efficiency of the oxy-hybrid on compressor pressure ratio is marginal, especially beyond an optimal value.

Performance Evaluation of a Molten Carbonate Fuel Cell/Micro Gas Turbine Hybrid System With Oxy-Combustion Carbon Capture

2017 ◽  
Vol 140 (4) ◽  
Author(s):  
Ji Ho Ahn ◽  
Tong Seop Kim
Keyword(s):  
Carbon Dioxide ◽  
Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Carbon Capture ◽  
Molten Carbonate Fuel Cell ◽  
Design Parameters ◽  
Molten Carbonate ◽  
Micro Gas Turbine ◽  
Carbonate Fuel Cell

Owing to the increasing consumption of fossil fuels and emission of greenhouse gases, interests in highly efficient and low carbon emitting power systems are growing fast. Several research groups have been suggesting advanced systems based on fuel cells and have also been applying carbon capture and storage technology to satisfy the demand for clean energy. In this study, the performance of a hybrid system, which is a combination of a molten carbonate fuel cell (MCFC) with oxy-combustion carbon capture and an indirectly fired micro gas turbine (MGT), was predicted. A 2.5 MW MCFC system that is used in commercial applications was used as the reference system so that the results of the study could be applied to practical situations. The ambient pressure type hybrid system was modeled by referring to the design parameters of an MGT that is currently being developed. A semi-closed type design characterized by flow recirculation was adopted for this hybrid system. A part of the recirculating gas is converted into liquefied carbon dioxide and captured for storage at the carbon separation unit (CSU). Almost 100% carbon dioxide capture is possible with this system. In these systems, the output power of the fuel cell is larger than in the normal hybrid system without carbon capture because the partial pressure of carbon dioxide increases. The increased cell power partially compensates for the power loss due to the carbon capture and MGT power reduction. The dependence of net system efficiency of the oxy-hybrid on compressor pressure ratio is marginal, especially beyond an optimal value.

Performance Enhancement of a Molten Carbonate Fuel Cell/Micro Gas Turbine Hybrid System With Carbon Capture by Off-Gas Recirculation

2018 ◽  
Author(s):  
Ji Ho Ahn ◽  
Ji Hun Jeong ◽  
Tong Seop Kim
Keyword(s):  
Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Carbon Capture ◽  
Molten Carbonate Fuel Cell ◽  
Human Society ◽  
Molten Carbonate ◽  
Micro Gas Turbine ◽  
Gas Recirculation ◽  
Carbonate Fuel Cell

The demand for clean energy continues to increase as the human society becomes more aware of environmental challenges such as global warming. Various power systems based on high-temperature fuel cells have been proposed, especially hybrid systems combining a fuel cell with a gas turbine, and research on carbon capture and storage technology to prevent the emission of greenhouse gases is already underway. This study suggests a new method to innovatively enhance the efficiency of a molten carbonate fuel cell/micro gas turbine hybrid system including carbon capture. The key technology adopted to improve the net cycle efficiency is off-gas recirculation. The hybrid system incorporating oxy-combustion capture was devised, and its performance was compared with that of a post-combustion system based on a hybrid system. A molten carbonate fuel cell system based on a commercial unit was modeled. Externally supplied water for reforming was not needed as a result of the presence of the water vapor in the recirculated anode off-gas. The analyses confirmed that the thermal efficiencies of all the systems (MCFC stand-alone, hybrid, hybrid with oxy-combustion capture, hybrid with post-combustion capture) were significantly improved by introducing the off-gas recirculation. In particular, the largest efficiency improvement was observed for the oxy-combustion hybrid system. Its efficiency is over 57% and is even higher than that of the post-combustion hybrid system.

Sign in / Sign up

Export Citation Format

Share Document