Study of pyrite based autotrophic denitrification system for low-carbon source stormwater treatment

2020 ◽  
Vol 37 ◽  
pp. 101414 ◽  
Author(s):  
Yifan Chen ◽  
Zhiyu Shao ◽  
Zheng Kong ◽  
Li Gu ◽  
Junhua Fang ◽  
...  
Keyword(s):  
Carbon Source ◽  
Autotrophic Denitrification ◽  
Stormwater Treatment ◽  
Low Carbon

Conditions and technologies of biological wastewater treatment in Hungary

2012 ◽  
Vol 65 (9) ◽  
pp. 1676-1683 ◽  
Author(s):  
G. M. Tardy ◽  
V. Bakos ◽  
A. Jobbágy
Keyword(s):  
Wastewater Treatment ◽  
Carbon Source ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plants ◽  
Treatment Temperature ◽  
Low Carbon ◽  
Biological Phosphorus Removal ◽  
Wastewater Quality ◽  
Removal Technologies ◽  
Biological Nitrogen

A survey has been carried out involving 55 Hungarian wastewater treatment plants in order to evaluate the wastewater quality, the applied technologies and the resultant problems. Characteristically the treatment temperature is very wide-ranging from less than 10 °C to higher than 26 °C. Influent quality proved to be very variable regarding both the organic matter (typical COD concentration range 600–1,200 mg l−1) and the nitrogen content (typical NH4-N concentration range 40–80 mg l−1). As a consequence, significant differences have been found in the carbon availability for denitrification from site to site. Forty two percent of the influents proved to lack an appropriate carbon source. As a consequence of carbon deficiency as well as technologies designed and/or operated with non-efficient denitrification, rising sludge in the secondary clarifiers typically occurs especially in summer. In case studies, application of intermittent aeration, low DO reactors, biofilters and anammox processes have been evaluated, as different biological nitrogen removal technologies. With low carbon source availability, favoring denitrification over enhanced biological phosphorus removal has led to an improved nitrogen removal.

An iron-carbon-activated carbon and zeolite composite filter, anaerobic-aerobic integrated denitrification device for nitrogen removal in low C/N ratio sewage

2019 ◽  
Vol 80 (2) ◽  
pp. 223-231
Author(s):  
Yixuan Xie ◽  
Ajun Wan ◽  
Xingmin Wang ◽  
Hengjie Dong ◽  
Yunpeng Wu
Keyword(s):  
Activated Carbon ◽  
Nitrogen Removal ◽  
High Efficiency ◽  
Strong Shock ◽  
Autotrophic Denitrification ◽  
Low Carbon ◽  
Carbon Nitrogen Ratio ◽  
Nitrogen Ratio ◽  
Composite Filter ◽  
Zeolite Composite

Abstract In this study, we use an anaerobic-aerobic integrated denitrification (Fe/C-ZACID) device with an iron-carbon-activated carbon and zeolite composite filter to remove nitrogen from simulated low carbon-nitrogen ratio (C/N) sewage. The impacts of dissolved oxygen (DO) level, hydraulic retention time (HRT), C/N and nitrate recirculation ratio on denitrification performance were studied. The results show that when HRT was 6 h, DO was 3 ± 0.1 mg/L, influent C/N was 3, and nitrate recirculation ratio was 100%, and removal rates of 95% for ammonia and 85% for total nitrogen (TN) were achieved. A beaker comparison test demonstrated that this synergistic denitrification system included heterotrophic denitrification, physicochemical denitrification, iron autotrophic denitrification and hydrogen autotrophic denitrification, etc. The Fe/C-ZACID device has a high-efficiency nitrogen removal effect for low C/N ratio sewage and strong shock resistance, which provides technical support and a theoretical basis for advanced denitrification of rural domestic sewage.

scholarly journals Comparison of Clay Ceramsite and Biodegradable Polymers as Carriers in Pack-bed Biofilm Reactor for Nitrate Removal

2019 ◽  
Vol 16 (21) ◽  
pp. 4184
Author(s):  
Qian Zhang ◽  
Xue Chen ◽  
Heng Wu ◽  
Wandong Luo ◽  
Xiangyang Liu ◽  
...  
Keyword(s):  
Carbon Source ◽  
Biodegradable Polymers ◽  
Nitrogen Removal ◽  
Solid Phase ◽  
Biofilm Reactor ◽  
Attractive Alternative ◽  
Low Carbon ◽  
Conventional Process ◽  
Biofilm Carrier ◽  
Denitrification Process

In recent years, there is a trend of low C/N ratio in municipal domestic wastewater, which results in serious problems for nitrogen removal from wastewater. The addition of an external soluble carbon source has been the usual procedure to achieve denitrification. However, the disadvantage of this treatment process is the need of a closed, rather sophisticated and costly process control as well as the risk of overdosing. Solid-phase denitrification using biodegradable polymers as biofilm carrier and carbon source was considered as an attractive alternative for biological denitrification. The start-up time of the novel process using PCL (polycaprolactone) as biofilm carrier and carbon source was comparable with that of conventional process using ceramsite as biofilm carrier and acetate as carbon source. Further, the solid-phase denitrification process showed higher nitrogen removal efficiency under shorter hydraulic retention time (HRT) and low carbon to nitrogen (C/N) ratio since the biofilm was firmly attached to the clear pores on the surface of PCL carriers and in this process bacteria that could degrade PCL carriers to obtain electron donor for denitrification was found. In addition, solid-phase denitrification process had a stronger resistance of shock loading than that in conventional process. This study revealed, for the first time, that the physical properties of the biodegradable polymer played a vital role in denitrification, and the different microbial compositions of the two processes was the main reason for the different denitrification performances under low C/N ratio.

scholarly journals Assessing the Operational Carbon at University

2018 ◽  
Author(s):  
Irina Safitri Zen ◽  
Masilah Bandi ◽  
Kasturi Devi Karniah ◽  
Iklil Nabihah Binti Abu Bakar ◽  
Rozana Zakaria
Keyword(s):  
Carbon Source ◽  
Assessment System ◽  
Low Carbon ◽  
Data Set ◽  
Research Activities ◽  
Strategic Approach ◽  
Living Lab ◽  
Campus Initiatives ◽  
The City

The establishment of low carbon assessment initiatives is a crucial task especially at the city level. The determination of which source of carbon contributed more require robust data set and strategic approach. Hence, by using the campus as a small city approach, the establishment of carbon assessment and its’ reduction initiatives was required to keep track of the hotspot of the carbon source. The substantial amount of carbon source from campus operations such as energy consumption in the building, waste generation, and water consumption were identified. Moreover, as institutions of higher education, the execution of low carbon campus was initiated structurally involves the triangulation of research activities, teaching & learning and as well as campus operations or known as campus living lab approach. The application of low carbon cities framework, LCCF and assessment system enables to strategize the low carbon campus initiatives through the use of carbon footprint concept and the LCCF carbon track.

scholarly journals Micro-Nano Carbon Structures with Platelet, Glassy and Tube-Like Morphologies

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1242 ◽  
Author(s):  
Liu ◽  
Huang ◽  
Xiong ◽  
Wang ◽  
Chen ◽  
...  
Keyword(s):  
Carbon Source ◽  
Carbon Nanostructures ◽  
Phenol Formaldehyde ◽  
Phenol Formaldehyde Resin ◽  
Production Costs ◽  
Formaldehyde Resin ◽  
Low Carbon ◽  
Graphite Nanoplatelets ◽  
Carbon Structures

Carbon source precursors for high-grade, clean, and low-carbon refractories were obtained by in situ exfoliation of flake graphite (FG) and phenol–formaldehyde resin (PF) composites with three-roll milling (TRM) for the fabrication of graphite nanoplatelets. In addition, by using Ni(NO3)2·6H2O as a catalyst in the pyrolysis process, multidimensional carbon nanostructures were obtained with coexisting graphite nanoplatelets (GNPs), glassy carbon (GC), and carbon nanotubes (CNTs). The resulting GNPs (exfoliated 16 times) had sizes of 10–30 μm, thicknesses of 30–50 nm, and could be uniformly dispersed in GC from the PF pyrolysis. Moreover, Ni(NO3)2·6H2O played a key role in the formation and growth of CNTs from a catalytic pyrolysis of partial PF with the V–S/tip growth mechanisms. The resulting multidimensional carbon nanostructures with GNPs/GC/CNTs are attributed to the shear force of the TRM process, pyrolysis, and catalytic action of nitrates. This method reduced the production costs of carbon source precursors for low-carbon refractories, and the precursors exhibited excellent performances when fabricated on large scales.

Sign in / Sign up

Export Citation Format

Share Document