Mechanical and thermal properties of a room temperature curing epoxy resin and related hemp fibers reinforced composites using a novel in-situ generated curing agent

2018 ◽  
Vol 203 ◽  
pp. 293-301 ◽  
Author(s):  
Yi-le Xu ◽  
Abdul Qadeer Dayo ◽  
Jun Wang ◽  
An-ran Wang ◽  
Dan Lv ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Epoxy Resin ◽  
Room Temperature ◽  
Mechanical And Thermal Properties ◽  
Curing Agent ◽  
Reinforced Composites ◽  
Hemp Fibers

Studies on Mechanical and Thermal Properties of Epoxy Resin Modified by Fluorine-Containing Silicone

2013 ◽  
Vol 401-403 ◽  
pp. 713-716
Author(s):  
Cheng Fang ◽  
Dong Bo Guan ◽  
Wei Guo Yao ◽  
Shou Jun Wang ◽  
Hui An
Keyword(s):  
Glass Transition ◽  
Thermal Properties ◽  
Epoxy Resin ◽  
Bending Strength ◽  
Mechanical And Thermal Properties ◽  
Curing Agent ◽  
Epoxy System ◽  
Resin Curing ◽  
The Impact ◽  
Modified Epoxy

The epoxy resin was modified with the mixture of α,ω-dihydroxy poly-(3,3,3-trifluoropropyl) siloxane (PTFPMS), KH560 and stannous octoate. KH560 can react with PTFPMS and also epoxy resin curing agent. The two reactions were characterized by FI-IR. The modified epoxy resin was characterized by FI-IR. The result showed that fluorine-containing silicone had been successfully introduced into the epoxy system. The mechanical and thermal properties of the modified epoxy resin were analyzed. The results showed that with the increase of PTFPMS the impact strength of epoxy resin increased, hardness and bending strength correspondingly reduced, slight decrease in the glass transition temperature.

Synthesis and Characterization and Properties Comparison of Epoxy Filled Pennisetum typhoides (Jowar) Filler and Treated Sacharun offinarum (Sugar Cane) Fiber Reinforced Composites

2015 ◽  
Vol 51 ◽  
pp. 34-40
Author(s):  
U. Mahaboob Basha ◽  
D. Mohana Krishnudu ◽  
P. Hussain ◽  
K. Manohar Reddy ◽  
N. Karthikeyan ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Sugar Cane ◽  
Room Temperature ◽  
Fiber Reinforced Composites ◽  
Synthesis And Characterization ◽  
Mechanical And Thermal Properties ◽  
Reinforced Composites ◽  
Epoxy System ◽  
Pennisetum Typhoides ◽  
The Matrix

In the current work epoxy resin is chosen as matrix, treated Sacharum offinarum (SugarCane) fiber, Pennisetum typhoides (Jowar) filler is chosen as reinforcement. Room temperature cured Epoxy System filled with Sacharum offinarum fiber and Pennisetum typhoides (Jowar) filler is synthesised by mechanical shear mixer, then kept in a Ultra sonic Solicitor for better dispersion of Pennisetum typhoides (Jowar) filler in the matrix. Different weights of modified Pennisetum typhoides (Jowar) filler (1,2,3,4,5 gm wt) has been incorporated into the Epoxy matrix in order to study the variation of Mechanical and Thermal properties.

scholarly journals Reaction Mechanism and Mechanical Property Improvement of Poly(Lactic Acid) Reactive Blending with Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2429
Author(s):  
Krittameth Kiatiporntipthak ◽  
Nanthicha Thajai ◽  
Thidarat Kanthiya ◽  
Pornchai Rachtanapun ◽  
Noppol Leksawasdi ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Epoxy Resin ◽  
Softening Temperature ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Nanoparticle Dispersion ◽  
Reactive Blending ◽  
Partial Miscibility ◽  
Epoxy Blends ◽  
Epoxy Content

Polylactic acid (PLA) was melt-blended with epoxy resin to study the effects of the reaction on the mechanical and thermal properties of the PLA. The addition of 0.5% (wt/wt) epoxy to PLA increased the maximum tensile strength of PLA (57.5 MPa) to 67 MPa, whereas the 20% epoxy improved the elongation at break to 12%, due to crosslinking caused by the epoxy reaction. The morphology of the PLA/epoxy blends showed epoxy nanoparticle dispersion in the PLA matrix that presented a smooth fracture surface with a high epoxy content. The glass transition temperature of PLA decreased with an increasing epoxy content owing to the partial miscibility between PLA and the epoxy resin. The Vicat softening temperature of the PLA was 59 °C and increased to 64.6 °C for 0.5% epoxy. NMR confirmed the reaction between the -COOH groups of PLA and the epoxy groups of the epoxy resin. This reaction, and partial miscibility of the PLA/epoxy blend, improved the interfacial crosslinking, morphology, thermal properties, and mechanical properties of the blends.

scholarly journals 3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 894 ◽  
Author(s):  
Hongjiao Lin ◽  
Hejun Li ◽  
Qingliang Shen ◽  
Xiaohong Shi ◽  
Tao Feng ◽  
...  
Keyword(s):  
Shear Strength ◽  
Thermal Properties ◽  
Sol Gel ◽  
Interlaminar Shear Strength ◽  
Mechanical And Thermal Properties ◽  
Initial Oxidation ◽  
Sic Nanowires ◽  
Out Of Plane ◽  
Interlaminar Shear

An in-situ, catalyst-free method for synthesizing 3C-SiC ceramic nanowires (SiCNWs) inside carbon–carbon (C/C) composites was successfully achieved. Obtained samples in different stages were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman scattering spectroscopy. Results demonstrated that the combination of sol-gel impregnation and carbothermal reduction was an efficient method for in-situ SiCNW synthesis, inside C/C composites. Thermal properties and mechanical behaviors—including out-of-plane and in-plane compressive strengths, as well as interlaminar shear strength (ILLS) of SiCNW modified C/C composites—were investigated. By introducing SiCNWs, the initial oxidation temperature of C/C was increased remarkably. Meanwhile, out-of-plane and in-plane compressive strengths, as well as interlaminar shear strength (ILLS) of C/C composites were increased by 249.3%, 109.2%, and 190.0%, respectively. This significant improvement resulted from simultaneous reinforcement between the fiber/matrix (F/M) and matrix/matrix (M/M) interfaces, based on analysis of the fracture mechanism.

Microstructure, mechanical, and thermal properties of in situ-synthesized (ZrB2+SiC)/Zr2[Al(Si)]4C5 composites

2013 ◽  
Vol 39 (7) ◽  
pp. 8559-8563 ◽  
Author(s):  
D.D. Guo ◽  
J. Yang ◽  
L. Yu ◽  
L.M. Pan ◽  
T. Qiu ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Mechanical And Thermal Properties
Sign in / Sign up

Export Citation Format

Share Document