Investigation on bonding strength of steel/aluminum clad sheet processed by horizontal twin-roll casting, annealing and cold rolling

In this paper, non-silicon steel sheets were produced by both twin-roll casting method and conventional process. Orientation characteristics and texture evolution of the sheets during casting, cold rolling and recrystallization annealing were investigated for comparison. It was found that the subsurface of twin-roll casting strips are characterized by weak {100} orientation while the central layer by random orientation. Twin-roll casting process can decrease α fiber (//RD) and increase γ fiber (//ND) during cold rolling process. Consequently, the η fiber (//RD) favorable for magnetic properties of non-silicon steels is enhanced and the detrimental {111} component is suppressed after annealing.

Download Full-text

Analysis of Properties of Selected Aluminium Alloys, Obtained by Twin Roll Casting Method and Subjected to Cold Rolling Process

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.641.202 ◽

2015 ◽

Vol 641 ◽

pp. 202-209

Author(s):

Wojciech Ściężor ◽

Andrzej Mamala ◽

Paweł Kwaśniewski

Keyword(s):

Mechanical Properties ◽

Continuous Casting ◽

Cold Rolling ◽

Aluminium Alloys ◽

Raw Materials ◽

Uniaxial Tensile ◽

Casting Method ◽

Twin Roll Casting ◽

Roll Casting ◽

Twin Roll

Modern manufacturing technologies of flat cold-rolled products made of aluminium and its alloys are based on raw materials produced with the use of continuous casting technology. One of the most frequently used integrated production processes, based on continuous casting of metal, is twin roll casting method (TRC). In TRC method liquid metal flows into the area formed by two water-cooled rolls, solidifies and next is deformed (rolled) which allows to obtain strip with several millimetres thickness. Thanks to this, it is possible to eliminate hot rolling stage from the typical production technology, and directly subject obtained sheets to cold rolling process.This paper presents results of cold rolling strain dependency on the mechanical properties of tested aluminium alloys from 1XXX, 3XXX and 8XXX series, produced in the laboratory conditions with the use of TRC method. Furthermore the rolling loads and basic mechanical properties, determined in an uniaxial tensile, were examined.

Download Full-text

Study of the Mechanical Properties of Strips Obtained in TRC Line

Archives of Metallurgy and Materials ◽

10.1515/amm-2016-0185 ◽

2016 ◽

Vol 61 (2) ◽

pp. 1101-1108 ◽

Cited By ~ 1

Author(s):

A. Mamala ◽

W. Ściężor ◽

P. Kwaśniewski ◽

J. Grzebinoga ◽

R. Kowal

Keyword(s):

Mechanical Properties ◽

Chemical Composition ◽

Cold Rolling ◽

Rolling Process ◽

Twin Roll Casting ◽

Integrated Method ◽

Casting Technology ◽

Roll Casting ◽

Processing Line ◽

Twin Roll

Abstract Twin Roll Casting technology belongs to modern, integrated method of processing aluminum and its alloys. This method includes preparation of liquid metal and its continuous casting between the rotating cylindrical crystallizers, optional homogenizing treatment, cold rolling and optional interoperation or final heat treatment. Final products of TRC method are strips with a thickness from few to several millimeters, which can be directly subjected to cold rolling process to afford a sheet. Properties of final product are limited by the material’s condition, its chemical composition and also selected path of its processing technology. The paper presents research results of chemical composition and mechanical properties of strips obtained in Twin Roll Casting processing line.

Download Full-text