Numerical and Experimental Research on Fluid Flow, Solidification, and Bonding Strength During the Twin-Roll Casting of Cu/Invar/Cu Clad Strips

2020 ◽  
Vol 51 (4) ◽  
pp. 1617-1631
Author(s):  
Ce Ji ◽  
Huagui Huang ◽  
Xu Zhang ◽  
Ridong Zhao
Keyword(s):  
Fluid Flow ◽  
Experimental Research ◽  
Bonding Strength ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll

scholarly journals Computer Modeling of Electromagnetic Fields and Fluid Flows for Edge Containment in Continuous Casting

2004 ◽  
Vol 127 (4) ◽  
pp. 724-730 ◽  
Author(s):  
Fon-Chieh Chang ◽  
John R. Hull
Keyword(s):  
Numerical Simulation ◽  
Fluid Flow ◽  
Liquid Metal ◽  
Eddy Currents ◽  
Stokes Equations ◽  
Fluid Flows ◽  
Experimental Results ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll

A computer model was developed to predict eddy currents and fluid flows in molten steel. The model was verified by comparing predictions with experimental results of liquid-metal containment and fluid flow in electromagnetic (EM) edge dams (EMDs) designed at Inland Steel (Ispat Industries Ltd.) for twin-roll casting. This mathematical model can greatly shorten casting research on the use of EM fields for liquid metal containment and control. It can also optimize the existing casting processes and minimize expensive, time-consuming full-scale testing. The model was verified by comparing predictions with experimental results of liquid metal containment and fluid flow in EM edge dams designed at Inland Steel (Ispat Industries Ltd.) for twin-roll casting. Numerical simulation was performed by coupling a three-dimensional (3D) finite-element EM code (ELEKTRA) and a 3D finite-difference fluids code (CaPS-EM) to solve Maxwell’s equations, Ohm’s law, Navier-Stokes equations, and transport equations of turbulence flow in a casting process that uses EM fields. ELEKTRA is able to predict the eddy-current distribution and EM forces in complex geometry. CaPS-EM is capable of modeling fluid flows with free surfaces and dynamic rollers. The computed 3D magnetic fields and induced eddy currents in ELEKTRA are used as input to flow-field computations in CaPS-EM. Results of the numerical simulation compared well with measurements obtained from both static and dynamic tests.

Bonding strength of Invar/Cu clad strips fabricated by twin-roll casting process

2018 ◽  
Vol 28 (12) ◽  
pp. 2460-2469 ◽  
Author(s):  
Peng CHEN ◽  
Hua-gui HUANG ◽  
Ce JI ◽  
Xu ZHANG ◽  
Zhong-hua SUN
Keyword(s):  
Bonding Strength ◽  
Casting Process ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll

scholarly journals Mechanism of Electromagnetic Field in the Sub-RapidSolidification of High-Strength Al-Cu-Li Alloy Produced by Twin-Roll Casting

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 952
Author(s):  
Shiju Li ◽  
Bowen Wei ◽  
Wei Yu ◽  
Chen He ◽  
Yong Li ◽  
...  
Keyword(s):  
Body Force ◽  
High Strength ◽  
Solidification Structure ◽  
Experimental Characterization ◽  
Alloy Plate ◽  
Twin Roll Casting ◽  
Comprehensive Properties ◽  
Roll Casting ◽  
Mold Casting ◽  
Twin Roll

In this work, a Al-Cu-Li alloy plate with outstanding mechanical properties was successfully prepared with electromagnetic twin-roll casting (TRC) technology. The microstructure of Al-Cu-Li alloy manufactured by conventional mold casting, TRC, and electromagnetic TRC was studied in detail. The action mechanism of electromagnetic oscillation field (EOF) in the TRC process was studied by systematic experimental characterization and numerical simulation. The results show that the EOF will enlarge the circumfluence area in the cast-rolling zone, accelerate the mass transfer and heat transfer in the molten pool, and make the solute field and flow field in the liquid cavity tend to be evenly distributed. Further, the introduction of the EOF will produce the electromagnetic body force F with the maximum strength of 14 N/m3. The F acting on the solidification front will eliminate the accumulation and deposition of Cu2+, Li+, Mg2+, Zn2+, Mn2+ at the dendrite tip and inhibit the growth of dendrites. At the same time, the F can refine the microstructure of the TRC plate, promote the formation of equiaxed crystals, improve the supersaturated solid solubility of solute elements in the a(Al) matrix, and avoid the appearance of obvious solute segregation area or the formation of excessive solute enrichment area. Therefore, the macro-segregation in TRC plate was significantly reduced, the solidification structure was dramatically refined, and the comprehensive properties of the alloy were remarkably improved.

Sign in / Sign up

Export Citation Format

Share Document