Effects of aging treatment and freezing/thawing methods on the quality attributes of beef from Limousin × Holstein-Friesian and Hereford × Holstein-Friesian crossbreeds

Meat Science ◽  
2018 ◽  
Vol 137 ◽  
pp. 71-76 ◽  
Author(s):  
Julia Bogdanowicz ◽  
Marek Cierach ◽  
Tomasz Żmijewski
2019 ◽  
Vol 75 (01) ◽  
pp. 6182-2019
Author(s):  
HATICE AHU KAHRAMAN ◽  
ÜMIT GÜRBÜZ

The aim of this study was to investigate the effects of three aging processes (traditional dry aging, wet aging in vacuum shrink pack and dry aging in a highly moisture-permeable bag) in five aging times (0, 7, 14, 21, 28 days) for their effects on physical, chemical, microbial, histological, textural and sensory properties of beef Longissimus lumborum muscle from Holstein-Friesian steers. Longissimus lumborum muscles were aged dry (D), in a dry-aging bag (B) and a vacuum shrink pack (V) for 28 days at 0.5°C±0.5 with 80% humidity. An increase was observed in pH and TBARS values of all samples. All methods caused a decrease in the WBSF value. The decrease of WBSF was rapid until the 14th day. V samples had lower WBSF values in comparison with others. While the L*and a* values were similar on the 28th day in all groups, b* values were different (p<0.05). There were no significant effects of aging treatment on the sarcomere length on the 28th day (p>0.05). An increase was also observed in the numbers of the total viable count, total psychrophilic bacteria, Enterobacteriaceae, lactic acid bacteria and yeast-mold in all groups. B aging may have a positive effect on safety, quality, yield and shelf stability of aged-beef. V aging significantly improves both textural and sensory characteristics of meat. The most positive effect on flavor, juiciness, tenderness and overall like were observed in the V aged treatment on the 14th day of aging. The use of the vacuum shrink pack is considered to be an alternative packing material in the wet aging method to improve the physicochemical and sensory quality of beef.


2021 ◽  
Vol 882 ◽  
pp. 21-27
Author(s):  
Seyed Veghar Seyedmohammadi ◽  
Amin Radi ◽  
Guney Guven Yapici

In the present work, the effects of artificial aging treatment on the transformation temperatures and hardness of Cu-Al-Mn shape memory alloy have been investigated. The aging processes have been performed on the one-time re-melted and 90% rolled samples. Differential scanning calorimetry reveals that reverse transformation is present for the re-melted sample which is aged at 400°C. However, in 90% rolled condition, this transformation takes place at 200°C and 300°C. Hardness examination shows that the aged specimens possess higher values in hardness in comparison to un-aged samples at all studied temperatures. Although, the peak-aged condition was demonstrated at 300°C for the re-melted sample, the rolled sample displayed increased hardness levels up to 500°C. Based on the DSC measurements and microstructural observations, it can be asserted that the thermo-mechanical processing including rolling plus aging at 300°C provides favorable transformation characteristics for shape memory behavior.


2010 ◽  
Vol 527 (16-17) ◽  
pp. 4076-4081 ◽  
Author(s):  
P.C. Wang ◽  
M.C. Lin ◽  
H.C. Lin ◽  
K.M. Lin ◽  
M.T. Yeh ◽  
...  

2011 ◽  
Vol 117-119 ◽  
pp. 862-865 ◽  
Author(s):  
Guo Shang Zhang ◽  
Shu Zeng Hou ◽  
Shi Zhong Wei ◽  
Ji Wen Li ◽  
Liu Jie Xu

This paper dealt with how the aging time and temperature affected the hardness of beryllium bronze layer in the explosive welded beryllium-bronze/carbon-steel composite plate. The properties of shearing, bonding, cold bending and microhardness were studied in term of the composite plate, including the aging and nonaging. The optimum aging treatment process of the composite plate is aging temperature at 320°C for 3 hours. And the results show that: aging treatment has no obvious effects on the shear strength but sharply decreases bond strength of the composite plate. And aging treatment to a certain extent reduce the cold bending prroperty. After aging treatment, the microhardness value and distribution of carbon steel was no obvious change, and the microhardness of beryllium bronze sharply raised and smoothly distributed.


Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1691
Author(s):  
Hui Zhang ◽  
Yanfeng Liu ◽  
Xian Zhai ◽  
Wenkai Xiao

During the casting cooling process or the forging process, austenitic stainless steel will remain at around 800 °C for some time. During this period, precipitate particle behaviors in austenitic stainless steel (containing ferrite) will cause a reduction in ductility, which can lead to material cracking. In this study, the effects of aging at 800 °C on the microstructure, impact toughness and microhardness of Z2CND18-12N austenitic stainless steel were systematically investigated. The precipitation processes of the χ and σ phases were characterized by color metallography and back scattered electron (BSE) signals. The toughness was investigated by the Charpy impact test. After the aging treatment, the χ and σ phases precipitated successively in the ferrite, and as the aging duration increased, the χ-phase dissolved and the σ-phase precipitated along the austenite grain boundaries. These all lead to a decrease in toughness and an increase in microhardness. Finally, the relationship between fracture morphology and aging time is discussed herein, and a crack mechanism is given.


Sign in / Sign up

Export Citation Format

Share Document