Luminescence of SiO2-BaF2:Tb3+, Eu3+ Nano-Glass-Ceramics Made from Sol–Gel Method at Low Temperature

The synthesis and characterization of multicolor light-emitting nanomaterials based on rare earths (RE3+) are of great importance due to their possible use in optoelectronic devices, such as LEDs or displays. In the present work, oxyfluoride glass-ceramics containing BaF2 nanocrystals co-doped with Tb3+, Eu3+ ions were fabricated from amorphous xerogels at 350 °C. The analysis of the thermal behavior of fabricated xerogels was performed using TG/DSC measurements (thermogravimetry (TG), differential scanning calorimetry (DSC)). The crystallization of BaF2 phase at the nanoscale was confirmed by X-ray diffraction (XRD) measurements and transmission electron microscopy (TEM), and the changes in silicate sol–gel host were determined by attenuated total reflectance infrared (ATR-IR) spectroscopy. The luminescent characterization of prepared sol–gel materials was carried out by excitation and emission spectra along with decay analysis from the 5D4 level of Tb3+. As a result, the visible light according to the electronic transitions of Tb3+ (5D4 → 7FJ (J = 6–3)) and Eu3+ (5D0 → 7FJ (J = 0–4)) was recorded. It was also observed that co-doping with Eu3+ caused the shortening in decay times of the 5D4 state from 1.11 ms to 0.88 ms (for xerogels) and from 6.56 ms to 4.06 ms (for glass-ceramics). Thus, based on lifetime values, the Tb3+/Eu3+ energy transfer (ET) efficiencies were estimated to be almost 21% for xerogels and 38% for nano-glass-ceramics. Therefore, such materials could be successfully predisposed for laser technologies, spectral converters, and three-dimensional displays.

Synthesis, crystal structure and thermal properties of bis(1,3-dicyclohexylthiourea-κS)bis(isothiocyanato-κN)cobalt(II)

Crystals of the title compound, [Co(NCS)2(C13H24N2S)2], were obtained by the reaction of Co(NCS)2 with 1,3-dicyclohexylthiourea in ethanol. Its crystal structure consists of discrete complexes that are located on twofold rotation axes, in which the CoII cations are tetrahedrally coordinated by two terminal N-bonded thiocyanate anions and two 1,3-dicyclohexylthiourea ligands. These complexes are linked via intermolecular N—H...S and C—H...S hydrogen bonding into chains, which elongate in the b-axis direction. These chains are closely packed in a pseudo-hexagonal manner. The CN stretching vibration of the thiocyanate anions located at 2038 cm−1 is in agreement with only terminal bonded anionic ligands linked to metal cations in a tetrahedral coordination. TG–DTA measurements prove the decomposition of the compound at about 227°C. DSC measurements reveal a small endothermic signal before decomposition at about 174°C, which might correspond to melting.

The Interactions and Release Kinetics of Sodium Hyaluronate Implemented in Nonionic and Anionic Polymeric Hydrogels, Studied by Immunoenzymatic ELISA Test

Hyaluronan is a natural polymer that was introduced to wound therapy. Formulations based on synthetic polymers such as methylcellulose (MC) and polyacrylic acid (PA) containing hyaluronan (HA) were proposed for the development of prospective wound-healing preparations. The formulations of different carrier concentrations containing a fixed amount of HA were prepared, and their viscosity was measured. The HA release was evaluated by employing the apparatus paddle over a disc. The hydrogels were introduced to the donor chamber, and HA was released to the pH = 7.4 buffer. The amount of HA released was obtained using the ELISA test. The release was analyzed on the basis of different kinetic models: zero-, first-, and second-order kinetics, as well as Higuchi and Korsmeyer–Peppas equations. The release rate constants and the half release time were calculated from these equations. According to the value of the coefficient of the determination, the best model describing the observed process was selected. The comparison between the dissolution profiles was carried out by calculating the difference factor f1 and the similarity factor f2. The interaction between the hydrogel components was investigated by Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) measurements. The study revealed that the zero-order equation best described the release of HA from the formulations studied. The FTIR research and the DSC study showed the intermolecular interaction between HA chains in MC-based compositions, as well as between HA and the synthetic polymer in the PA-based formulations. The study revealed that the formulation with a higher concentration of synthetic polymer may prolong the release of HA. The obtained results indicated that the proposed hydrogels have potential for wound healing and may accelerate skin regeneration.

Experimental Investigations of AlMg3 Components with Polyurethane and Graphene Oxide Nanosheets Composite Coatings, after Accelerated UV-Aging

The use of graphene (Gr) and its derivates graphene oxide (GO) showed that these materials are good candidates to enhance the properties of polyurethane (PU) coatings, especially the anticorrosion ones since graphene absorbs most of the light and provides hydrophobicity for repelling water. An important aspect of these multifunctional materials is that all these improvements can be realized even at very low filler loadings in the polymer matrix. In this work, an ultrasound cavitation technique was used for the proper dispersion of GO nanosheets (GON) in polyurethane (PU) resin to obtain a composite coating to protect the AlMg3 substrate. The addition of GON considerably improved the physical properties of coatings, as demonstrated by electrochemical impedance spectroscopy (EIS) analysis, promising improved anticorrosion performance after accelerated UV-ageing. Computational methods and Differential Scanning Calorimetry (DSC) measurements showed that GON facilitates the formation of additional bonds and stabilizes the PU structures during the ultraviolet (UV) exposure and aggressive attack of corrosive species. Limiting oxygen index (LOI) data reveal a slow burning behaviour of PU-GON coatings during UV exposure, which is better than PU alone.

Thermal Analysis of Protein Stability and Ligand Binding in Complex Media

ABSTRACTScreening of ligands that can bind to biologic products of in vitro expression systems typically requires some purification of the expressed biologic target. Such purification is often laborious and time consuming and a limiting challenge. What is required, that could represent an enormous advantage, is the ability to screen expressed proteins in the crude lysate stage without purification. For that purpose, we explore here the utility of differential scanning calorimetry (DSC) measurements for detecting the presence of specific proteins and their interactions with ligands in the complex media where they were prepared, i.e. crude lysates. Model systems were designed to mimic analogous conditions comparable to those that might be encountered in actual in vitro expression systems. Results are reported for several examples where DSC measurements distinctly showed differences in the thermal denaturation behaviors of the crude lysate alone, proteins and proteins plus binding ligands added to the crude lysate. Results were obtained for Streptavidin/Biotin binding in E. coli lysate, and binding of Angiotensin Converting Enzyme 2 (ACE2) by captopril or lisinopril in the lysate supernatant derived from cultured Human Kidney cells (HEK293). ACE2 binding by the reactive binding domain (RBC) of SARS-CoV-2 was also examined. Binding of ACE2 by RBC and lisinopril were similar and consistent with the reported ACE2 inhibitory activity of lisinopril.

Phase Transitions in the Co–Al–Nb–Mo System

Phase transitions in the Co-rich part of the Co–Al–Nb–Mo phase diagram are studied by energy dispersive spectroscopy (EDS), X-ray analysis, transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) measurements. The obtained results were compared with the results for alloys of the binary Co–Al and ternary Co–Al–Nb, and Co–Al–Mo systems. Formation of the intermetallic phase with the L12 structure was found in a range of alloys with 10 at.% Al, 2–9 at.% Nb, and 3–7 at.% Mo. Intermetallic compound Co2Nb, Laves phase with the different chemical composition and crystal structure (C14 and C36) was detected in the Co–Al–Nb and Co–Al–Nb–Mo samples after vacuum solution treating at 1250 °C for 30 h.

In-Out Surface Modification of Halloysite Nanotubes (HNTs) for Excellent Cure of Epoxy: Chemistry and Kinetics Modeling

In-out surface modification of halloysite nanotubes (HNTs) has been successfully performed by taking advantage of 8-hydroxyquinolines in the lumen of HNTs and precisely synthesized aniline oligomers (AO) of different lengths (tri- and pentamer) anchored on the external surface of the HNTs. Several analyses, including FTIR, H-NMR, TGA, UV-visible spectroscopy, and SEM, were used to establish the nature of the HNTs’ surface engineering. Nanoparticles were incorporated into epoxy resin at 0.1 wt.% loading for investigation of the contribution of surface chemistry to epoxy cure behavior and kinetics. Nonisothermal differential scanning calorimetry (DSC) data were fed into home-written MATLAB codes, and isoconversional approaches were used to determine the apparent activation energy (Eα) as a function of the extent of cure reaction (α). Compared to pristine HNTs, AO-HNTs facilitated the densification of an epoxy network. Pentamer AO-HNTs with longer arms promoted an Excellent cure; with an Eα value that was 14% lower in the presence of this additive than for neat epoxy, demonstrating an enhanced cross-linking. The model also predicted a triplet of cure (m, n, and ln A) for autocatalytic reaction order, non-catalytic reaction order, and pre-exponential factor, respectively, by the Arrhenius equation. The enhanced autocatalytic reaction in AO-HNTs/epoxy was reflected in a significant rise in the value of m, from 0.11 to 0.28. Kinetic models reliably predict the cure footprint suggested by DSC measurements.

Synthesis, crystal structure, and thermal stability of double borate Na3ErB2O6

Double borate Na3ErB2O6 was synthesized by the solid-state reaction. The crystal structure of Na3ErB2O6 was refined by the Rietveld method: P21/c, a = 6.49775(14) Å, b = 8.50424(17) Å, c = 12.0067(3) Å, β = 118.4797(9)°, Z = 4. The crystal structure of Na3ErB2O6 consists of –[ErO6]∞-chains along the "b" axis, which are linked by BO3 triangles in a three-dimensional framework. Sodium atoms occupy empty positions inside the channels. The thermal behavior of Na3ErB2O6 was studied in detail in the range of 25–1150 °C range by DSC and TG methods. Na3ErB2O6 congruently melts at 1116 °C. Based on the results of DSC measurements, three reversible phase transitions were found for Na3ErB2O6.

Applicability of Infrared Thermography for the Detection of Phase Transitions in Metal Alloys

This work aims at assessing the applicability of a screening-oriented device dedicated to the establishment of increasingly complex phase diagrams of phase change materials. A thermography-based method has recently been proven to allow the detection of phase transitions of organic materials for multiple samples at a time. The phase transition detection capability of the infrared thermography method is here evaluated for metal systems based on well-referenced materials commonly employed in DSC calibration (pure sample of Gallium and a mixture of Gallium and Indium). The detected transitions are compared to literature data and DSC measurements. All transitions documented in the literature could be retrieved by thermography, and liquidus transitions are validated with DSC measurements. The encouraging nature of the results is discussed, and avenues for improving the method are considered.