A theoretical model for elastic-perfectly plastic flat cylindrical punch indentation

2021 ◽  
Vol 155 ◽  
pp. 103770
Author(s):  
Carlo Brutti
Keyword(s):  
Theoretical Model ◽  
Perfectly Plastic ◽  
Cylindrical Punch ◽  
Elastic Perfectly Plastic

Coefficient of Restitution for Collinear Collisions of Elastic-Perfectly Plastic Spheres

1997 ◽  
Vol 64 (2) ◽  
pp. 383-386 ◽  
Author(s):  
C. Thornton
Keyword(s):  
Theoretical Model ◽  
Analytical Solution ◽  
Yield Stress ◽  
Impact Velocity ◽  
Contact Interaction ◽  
Material Properties ◽  
Coefficient Of Restitution ◽  
Normal Contact ◽  
Perfectly Plastic ◽  
Elastic Perfectly Plastic

Based on a simplified theoretical model for the normal contact interaction of two elastic-perfectly plastic spheres, an analytical solution is provided for the coefficient of restitution. The solution is expressed in terms of the ratio of impact velocity to yield velocity rather than in terms of material properties such as the yield stress which is difficult to reliably ascertain for many materials.

A theoretical model for the contact of elastoplastic bodies

2001 ◽  
Vol 216 (4) ◽  
pp. 421-431 ◽  
Author(s):  
L-Y Li ◽  
C-Y Wu ◽  
C Thornton
Keyword(s):  
Finite Element ◽  
Theoretical Model ◽  
Contact Problems ◽  
Rigid Sphere ◽  
Element Analysis ◽  
Normal Contact ◽  
Perfectly Plastic ◽  
Static Contact ◽  
Elastic Perfectly Plastic ◽  
Force Displacement

The paper presents a theoretical model for the normal contact of a rigid sphere with an elastic-perfectly plastic half-space or an elastic-perfectly plastic sphere with a rigid wall. Formulae describing the force-displacement relationship for static contact problems and the coefficient of restitution for dynamic impact problems are derived. The present model can be considered as a modification of Johnson's model by using a more detailed pressure distribution function which is based on finite element analysis (PEA) results and considering the variation in the curvature of the contact surface during the contact interaction. In order to verify the theoretical model, finite element analyses are also conducted, and results are compared with those predicted by the model for both contact force-displacement relations and restitution coefficients. Good agreements between the model predictions and the FEA results are found.

scholarly journals A FEM analysis of the settlement of a tall building situated on loess subsoil

2020 ◽  
Vol 10 (1) ◽  
pp. 519-526
Author(s):  
Krzysztof Nepelski
Keyword(s):  
Fem Analysis ◽  
Actual Process ◽  
Linear Elastic ◽  
Perfectly Plastic ◽  
Modified Cam Clay ◽  
Linear Behaviour ◽  
Subsequent Calculation ◽  
Elastic Perfectly Plastic ◽  
Subsoil Model ◽  
Storey Building

AbstractIn order to correctly model the behaviour of a building under load, it is necessary to take into account the displacement of the subsoil under the foundations. The subsoil is a material with typically non-linear behaviour. This paper presents an example of the modelling of a tall, 14-storey, building located in Lublin. The building was constructed on loess subsoil, with the use of a base slab. The subsoil lying directly beneath the foundations was described using the Modified Cam-Clay model, while the linear elastic perfectly plastic model with the Coulomb-Mohr failure criterion was used for the deeper subsoil. The parameters of the subsoil model were derived on the basis of the results of CPT soundings and laboratory oedometer tests. In numerical FEM analyses, the floors of the building were added in subsequent calculation steps, simulating the actual process of building construction. The results of the calculations involved the displacements taken in the subsequent calculation steps, which were compared with the displacements of 14 geodetic benchmarks placed in the slab.

Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests

2020 ◽  
Vol 57 (3) ◽  
pp. 448-452 ◽  
Author(s):  
A.S. Lees ◽  
J. Clausen
Keyword(s):  
Triaxial Compression ◽  
Triaxial Tests ◽  
Compression Tests ◽  
Failure Envelope ◽  
Element Analysis ◽  
Linear Elastic ◽  
Perfectly Plastic ◽  
Elastic Perfectly Plastic ◽  
Triaxial Compression Tests ◽  
Properties Of Soil

Conventional methods of characterizing the mechanical properties of soil and geogrid separately are not suited to multi-axial stabilizing geogrid that depends critically on the interaction between soil particles and geogrid. This has been overcome by testing the soil and geogrid product together as one composite material in large specimen triaxial compression tests and fitting a nonlinear failure envelope to the peak failure states. As such, the performance of stabilizing, multi-axial geogrid can be characterized in a measurable way. The failure envelope was adopted in a linear elastic – perfectly plastic constitutive model and implemented into finite element analysis, incorporating a linear variation of enhanced strength with distance from the geogrid plane. This was shown to produce reasonably accurate simulations of triaxial compression tests of both stabilized and nonstabilized specimens at all the confining stresses tested with one set of input parameters for the failure envelope and its variation with distance from the geogrid plane.

On the Conditions to Prevent Plastic Shakedown of Structures: Part I—Theory

1993 ◽  
Vol 60 (1) ◽  
pp. 15-19 ◽  
Author(s):  
Castrenze Polizzotto
Keyword(s):  
Mechanical Load ◽  
Plastic Material ◽  
Perfectly Plastic ◽  
Shakedown Theory ◽  
Elastic Perfectly Plastic ◽  
Plastic Shakedown ◽  
Steady Load

For a structure of elastic perfectly plastic material subjected to a given cyclic (mechanical and/or kinematical) load and to a steady (mechanical) load, the conditions are established in which plastic shakedown cannot occur whatever the steady load, and thus the structure is safe against the alternating plasticity collapse. Static and kinematic theorems, analogous to those of classical shakedown theory, are presented.

Elasto-Plastic Coupled Temperature-Displacement Finite Element Analysis of Two-Dimensional Rolling-Sliding Contact With a Translating Heat Source

1991 ◽  
Vol 113 (1) ◽  
pp. 93-101 ◽  
Author(s):  
S. M. Kulkarni ◽  
C. A. Rubin ◽  
G. T. Hahn
Keyword(s):  
Finite Element ◽  
Half Space ◽  
Plastic Material ◽  
Element Model ◽  
Rolling Contact ◽  
Two Dimensional ◽  
Element Analysis ◽  
Element Mesh ◽  
Perfectly Plastic ◽  
Elastic Perfectly Plastic

The present paper, describes a transient translating elasto-plastic thermo-mechanical finite element model to study 2-D frictional rolling contact. Frictional two-dimensional contact is simulated by repeatedly translating a non-uniform thermo-mechanical distribution across the surface of an elasto-plastic half space. The half space is represented by a two dimensional finite element mesh with appropriate boundaries. Calculations are for an elastic-perfectly plastic material and the selected thermo-physical properties are assumed to be temperature independent. The paper presents temperature variations, stress and plastic strain distributions and deformations. Residual tensile stresses are observed. The magnitude and depth of these stresses depends on 1) the temperature gradients and 2) the magnitudes of the normal and tangential tractions.

Analytical Solutions of Crack Tip Plasticity Zone Shape for a Semi-Infinite Crack

2003 ◽  
Author(s):  
Peihua Jing ◽  
Tariq Khraishi ◽  
Larissa Gorbatikh
Keyword(s):  
Plane Strain ◽  
Plane Stress ◽  
Analytical Solutions ◽  
Yield Criterion ◽  
Plasticity Zone ◽  
Linear Elastic ◽  
Perfectly Plastic ◽  
Classical Plasticity ◽  
Elastic Perfectly Plastic ◽  
Von Mises

In this work, closed-form analytical solutions for the plasticity zone shape at the lip of a semi-infinite crack are developed. The material is assumed isotropic with a linear elastic-perfectly plastic constitution. The solutions have been developed for the cases of plane stress and plane strain. The three crack modes, mode I, II and III have been considered. Finally, prediction of the plasticity zone extent has been performed for both the Von Mises and Tresca yield criterion. Significant differences have been found between the plane stress and plane strain conditions, as well as between the three crack modes’ solutions. Also, significant differences have been found when compared to classical plasticity zone calculations using the Irwin approach.

Crushing of an Elastic-Perfectly Plastic Ring or Tube Between Two Planes

1987 ◽  
Vol 54 (1) ◽  
pp. 159-164 ◽  
Author(s):  
C. Y. Wang
Keyword(s):  
Plastic Deformation ◽  
Numerical Integration ◽  
Mathematical Problem ◽  
Plastic Ring ◽  
Perfectly Plastic ◽  
Analytical Approximations ◽  
Original Shape ◽  
Thin Ring ◽  
Elastic Perfectly Plastic

A thin ring is crushed between two rigid planes. Due to plastic deformation the ring does not recover its original shape when the compression is removed. For an elastic-perfectly plastic flexural material, the ring undergoes two to five different stages. The mathematical problem is formulated and solved by exact numerical integration and accurate analytical approximations.

Sign in / Sign up

Export Citation Format

Share Document