This study seeks to unravel the effect of carbon nanotube’s physical and chemical features on the final electrical and rheological properties of polymer nanocomposites thereof. Nitrogen-doped carbon nanotubes (N-CNTs) were synthesized over two different types of catalysts, i.e., Fe and Ni, employing chemical vapor deposition. Utilizing this technique, we were able to synthesize N-CNTs with significantly different structures. As a result, remarkable differences in the network structure of the nanotubes were observed upon mixing the N-CNTs in a polyvinylidene fluoride (PVDF) matrix, which, in turn, led to drastically different electrical and rheological properties. For instance, no enhancement in the electrical conductivity of poorly-dispersed (N-CNT)Ni/PVDF samples was observed even at high nanotube concentrations, whereas (N-CNT)Fe/PVDF nanocomposites exhibited an insulative behavior at 1.0 wt%, a semi-conductive behavior at 2.0 wt%, and a conductive behavior at 2.7 wt%. In terms of rheology, the most substantial differences in the viscoelastic behavior of the systems were distinguishable in the medium amplitude oscillatory shear (MAOS) region. The stress decomposition method combined with the evaluation of the elastic and viscous third-order Chebyshev coefficients revealed a strong intra-cycle elastic nonlinearity in the MAOS region for the poorly-dispersed systems in small frequencies; however, the well-dispersed systems showed no intra-cycle nonlinearity in the MAOS region. It was shown that the MAOS elastic nonlinearity of poorly-dispersed systems stems from the confinement of N-CNT domains between the rheometer’s plates for small gap sizes comparable with the size of the agglomerates. Moreover, the intra-cycle elastic nonlinearity of poorly-dispersed systems is frequency-dependent and vanished at higher frequencies. The correlation between the microstructure and viscoelastic properties under large shear deformations provides further guidance for the fabrication of high-performance 3D-printed electrically conductive nanocomposites with precisely controllable final properties for engineering applications.
Erratum: Effect of graphene nanosheets on the mechanical, electrical, and rheological properties of polyamide 6/acrylonitrile–butadiene–styrene blends
