Low-density polyethylene/curcumin melt extruded composites with enhanced water vapor barrier and antioxidant properties for active food packaging

Polymer ◽  
2019 ◽  
Vol 175 ◽  
pp. 137-145 ◽  
Author(s):  
Jasim Zia ◽  
Uttam C. Paul ◽  
José Alejandro Heredia-Guerrero ◽  
Athanassia Athanassiou ◽  
Despina Fragouli
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Water Vapor Barrier ◽  
Active Food Packaging

scholarly journals Low-Density Polyethylene Films Carrying ferula asafoetida Extract for Active Food Packaging: Thermal, Mechanical, Optical, Barrier, and Antifungal Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Razieh Niazmand ◽  
Bibi Marzieh Razavizadeh ◽  
Farzaneh Sabbagh
Keyword(s):  
Polymer Matrix ◽  
Food Packaging ◽  
Barrier Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Optical Barrier ◽  
Leaf Extracts ◽  
Polyethylene Films ◽  
Active Food Packaging ◽  
Ferula Asafoetida

The physical, thermal, mechanical, optical, microstructural, and barrier properties of low-density polyethylene films (LDPE) containing ferula asafoetida leaf and gum extracts were investigated. Results showed a reduction in elasticity and tensile strength with increasing extract concentration in the polymer matrix. The melting temperature and enthalpy increased with increasing concentration of extracts. The films containing extracts had lower L∗ and a∗ and higher b∗ indices. The films containing leaf extract had more barrier potential to UV than the gum extracts. The oxygen permeability in films containing 5% of leaf and gum extracts increased by 2.3 and 2.1 times, respectively. The morphology of the active films was similar to bubble swollen islands, which was more pronounced at higher concentrations of gum and leaf extracts. FTIR results confirmed some chemical interactions of ferula extracts with the polymer matrix. At the end of day 14th, the growth rate of Aspergillus niger and Saccharomyces cerevisea in the presence of the PE-Gum-5 reduced more than PE-Leaf-5 (3.7 and 2.4 logarithmic cycles, respectively) compared to the first day. Our findings showed that active LDPE films have desire thermo-mechanical and barrier properties for food packaging.

Oxygen and Water Vapor Barrier Properties of MMT Nanocomposites from Low Density Polyethylene or EPM with Grafted Succinic Groups

2008 ◽  
Vol 8 (4) ◽  
pp. 1690-1699 ◽  
Author(s):  
Elisa Passaglia ◽  
Monica Bertoldo ◽  
Silvia Ceriegi ◽  
Roberta Sulcis ◽  
Piero Narducci ◽  
...  
Keyword(s):  
Water Vapor ◽  
Barrier Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Water Vapor Barrier

scholarly journals Evaluación de la migración de bromuro de cetilpiridinio desde nanocompósitos activos hacia un simulante graso de alimentos/Cetylpyridinium bromide migration assessment from active nanocomposites to a fatty food simulant

2020 ◽  
Author(s):  
C. Muñoz-Shugulí ◽  
F.J. Rodríguez ◽  
E. Muñoz ◽  
M.J. Galotto
Keyword(s):  
Electrical Conductivity ◽  
Food Packaging ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Polymeric Nanocomposites ◽  
Cetylpyridinium Bromide ◽  
Active Food Packaging ◽  
Food Simulant ◽  
Fatty Food ◽  
The Matrix

En los últimos años, el desarrollo de nanocompósitos poliméricos se plantea como una interesante alternativa para el diseño de nuevos materiales para el envasado activo de alimentos. A pesar de esto, existe constante preocupación relacionada a la migración de los componentes activos incorporados en el material ya que, un material de envasado destinado a entrar en contacto con un alimento debe presentar valores de migración bajo los límites establecidos en regulaciones internacionales. En este sentido, el objetivo del presente trabajo fue evaluar la migración del surfactante bromuro de cetilpiridinio (CPB) desde nanocompósitos activos de polietileno de baja densidad y montmorillonita modificada con CPB, hacia un simulante graso de alimentos (etanol 95 %). El seguimiento de la migración del componente se realizó a través de la medición de la conductividad eléctrica del simulante en contacto con los nanocompósitos. Se determinó que la presencia del 3,0 % de organoarcilla permite una mayor migración del CPB debido a la presencia del surfactante libre en la matriz y al hinchamiento de la organoarcilla superficial por hidratación. Además, se observó que la migración es prolongada en el tiempo y está por debajo de los límites permitidos por la legislación estadounidense, lo que permitiría la generación de materiales novedosos que podrían ser empleados en el diseño de envases activos de alimentos. In the last years, the development of polymeric nanocomposites is presented as an interesting alternative for the design of new materials for active food packaging. Despite this, there are concerns regarding the migration of the components incorporated in the material since a packaging material intended to come into contact with food must have migration values under the limits established in international regulations. In this sense, the aim in this work was to evaluate the migration of the surfactant cetylpyridinium bromide (CPB) from active nanocomposites of low density polyethylene and motmorillonite modified with CPB to a fatty food simulant (ethanol 95 %). The migration of the component was followed by fat simulant electrical conductivity measurements during the contact with the nanocomposites. It was determined that materials with 3,0 % of organoclay allowed a higher migration of CPB due to the presence of free surfactant in the matrix and swelling of the superficial organoclay. In addition, it was observed that the migration is prolonged in time and it is below the limits allowed by US legislation, which would enable the generation of novel materials that could be used in the design of active food packaging. Palabras clave: surfactante, conductividad eléctrica, polietileno de baja densidad, organoarcilla, envase activo de alimentos. Keywords: surfactant, electrical conductivity, low density polyethylene, organoclay, food active packaging.

scholarly journals Polyethylene Migration from Food Packaging on Cheese Detected by Raman and Infrared (ATR/FT-IR) Spectroscopy

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3872
Author(s):  
Klytaimnistra Katsara ◽  
George Kenanakis ◽  
Zacharias Viskadourakis ◽  
Vassilis M. Papadakis
Keyword(s):  
Vibrational Spectroscopy ◽  
Food Packaging ◽  
Time Frame ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Ft Ir ◽  
Comparative Results ◽  
Short Time ◽  
And Storage ◽  
Ft Ir Spectroscopy

For multiple years, food packaging migration has been a major concern in food and health sciences. Plastics, such as polyethylene, are continuously utilized in food packaging for preservation and easy handling purposes during transportation and storage. In this work, three types of cheese, Edam, Kefalotyri and Parmesan, of different hardness were studied under two complementary vibrational spectroscopy methods, ATR-FTIR and Raman spectroscopy, to determine the migration of low-density polyethylene from plastic packaging to the surface of cheese samples. The experimental duration of this study was set to 28 days due to the degradation time of the selected cheese samples, which is clearly visible after 1 month in refrigerated conditions at 4 °C. Raman and ATR-FTIR measurements were performed at a 4–3–4–3 day pattern to obtain comparative results. Initially, consistency/repeatability measurement tests were performed on Day0 for each sample of all cheese specimens to understand if there is any overlap between the characteristic Raman and ATR-FTIR peaks of the cheese with the ones from the low-density polyethylene package. We provide evidence that on Day14, peaks of low-density polyethylene appeared due to polymeric migration in all three cheese types we tested. In all cheese samples, microbial outgrowth started to develop after Day21, as observed visually and under the bright-field microscope, causing peak reverse. Food packaging migration was validated using two different approaches of vibrational spectroscopy (Raman and FT-IR), revealing that cheese needs to be consumed within a short time frame in refrigerated conditions at 4 °C.

scholarly journals Novel Active Food Packaging Films Based on Whey Protein Incorporated with Seaweed Extract: Development, Characterization, and Application in Fresh Poultry Meat

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 229 ◽  
Author(s):  
Mariana A. Andrade ◽  
Cássia H. Barbosa ◽  
Victor G. L. Souza ◽  
Isabel M. Coelhoso ◽  
João Reboleira ◽  
...  
Keyword(s):  
Lipid Oxidation ◽  
Whey Protein ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Radical Scavenging ◽  
Poultry Meat ◽  
Whey Protein Concentrate ◽  
Protein Film ◽  
Active Food Packaging ◽  
Freeze Dried

Algae and seaweeds are used in cookery since the beginnings of human civilization, particularly in several Asian cultures. Phenolic compounds are secondary metabolites produced by aquatic and terrestrial plants for their natural defense against external stimuli, which possess powerful antimicrobial and antioxidant properties that can be very important for the food industry. The main objective of this study was to develop a whey protein concentrate active coating, incorporated with a Fucus vesiculosus extract in order to delay the lipid oxidation of chicken breasts. Ten hydroethanolic extracts from F. vesiculosus were obtained and their antioxidant capacity was evaluated through two antioxidant activity assays: the DPPH radical scavenging activity and β-carotene bleaching assay. The total content in phenolics compounds was also determined by Folin-Ciocalteu method. The chosen extract was the one obtained from the freeze-dried F. vesiculosus using 75% (v/v) ethanol as extraction solvent. The extract was successfully incorporated into a whey protein film and successfully strengthened the thickness, tensile strength, and elastic modulus. The active film also was able to inhibit the chicken breasts lipid oxidation for 25 days of storage.

Sign in / Sign up

Export Citation Format

Share Document