PP030. Transmission electron microscopy reveals leakage of laeverin into the villous capillaries and ectopic expression in the cytoplasm instead of cell membrane of the trophoblasts in preeclamptic placentas

2013 ◽  
Vol 3 (2) ◽  
pp. 78
Author(s):  
Mona Nystad ◽  
Vasilis Sitras ◽  
Ganesh Acharya
Development ◽  
1978 ◽  
Vol 43 (1) ◽  
pp. 55-69
Author(s):  
Ruth Bellairs ◽  
F. W. Lorenz ◽  
Tania Dunlap

Chick embryos ranging from the stage of first cleavage to that of about 700 cells were removed from the oviduct and examined by transmission electron microscopy. Beneath the cell membrane is a yolk-free cortical region containing microfilaments. Beneath this lies cytoplasm which contains yolk spheres which are graded in size, the dorsal ones being smaller than the ventral ones. The subgerminal periblast possesses a greater proportion of yolk to cytoplasm than do the cells proper, but it merges with the cytoplasm at the incomplete borders of the ‘open’ cells. Specialized accumulations of membranes lie in the marginal periblast, and it is suggested that they play a role in cell membrane formation.


2019 ◽  
Author(s):  
Michaela Wenzel ◽  
Marien P. Dekker ◽  
Biwen Wang ◽  
Maroeska J. Burggraaf ◽  
Wilbert Bitter ◽  
...  

AbstractTransmission electron microscopy (TEM) is an important imaging technique in bacterial research and requires ultrathin sectioning of resin embedding of cell pellets. This method consumes milli- to deciliters of culture and results in sections of randomly orientated cells. For rod-shaped bacteria, this makes it exceedingly difficult to find longitudinally cut cells, which precludes large-scale quantification of morphological phenotypes. Here, we describe a new fixation method using either thin agarose layers or carbon-coated glass surfaces that enables flat embedding of bacteria. This technique allows for the observation of thousands of longitudinally cut rod-shaped cells per single section and requires only microliter culture volumes. We successfully applied this technique to Gram-positive Bacillus subtilis, Gram-negative Escherichia coli, the tuberculosis vaccine strain Mycobacterium bovis BCG, and the cell wall-lacking mycoplasma Acholeplasma laidlawii. To assess the potential of the technique to quantify morphological phenotypes, we examined cellular changes induced by a panel of different antibiotics. Surprisingly, we found that the ribosome inhibitor tetracycline causes significant deformations of the cell membrane. Further investigations showed that the presence of tetracycline in the cell membrane changes membrane organization and affects the peripheral membrane proteins MinD, MinC, and MreB, which are important for regulation of cell division and elongation. Importantly, we could show that this effect is not the result of ribosome inhibition but is a secondary antibacterial activity of tetracycline that has defied discovery for more than 50 years.SignificanceBacterial antibiotic resistance is a serious public health problem and novel antibiotics are urgently needed. Before a new antibiotic can be brought to the clinic, its antibacterial mechanism needs to be elucidated. Transmission electron microscopy is an important tool to investigate these mechanisms. We developed a flat embedding method that enables examination of many more bacterial cells than classical protocols, enabling large-scale quantification of phenotypic changes. Flat embedding can be adapted to most growth conditions and microbial species and can be employed in a wide variety of microbiological research fields. Using this technique, we show that even well-established antibiotics like tetracycline can have unknown additional antibacterial activities, demonstrating how flat embedding can contribute to finding new antibiotic mechanisms.


1978 ◽  
Vol 56 (9) ◽  
pp. 1889-1905 ◽  
Author(s):  
T. D. G. Lee ◽  
K. A. Wright

The 'tunnel' within which the nematode Trichuris muris is contained was examined by light, scanning, and transmission electron microscopy. The amount of worm covered by the tunnel varied with age. Young larval worms were completely embedded in the host's intestinal mucosa whereas older larvae and adults had part, if not all, of the posterior region protruding into the lumen. All worms were found to have heads embedded in the tissue and in no cases were whole worms found free in the lumen.The 'tunnel' was shown to be a syncytial protoplasmic mass with recognizable cellular elements such as nuclei, lipid droplets, mitrochondria, and mucous droplets anteriorly whereas more distal to the head these elements became increasingly scarce and degenerated. The syncytium is bordered apically, laterally, and basally by cell membrane. The basal lamina can be identified beneath the basal membrane of the syncytium indicating that syncytium formation occurs in the epithelial sheet only and does not extend into the lamina propria. Evidence suggests that the nematode initially induces a syncytium about its head, feeds on the syncytial cytoplasm, and then moves on to initiate extension of the syncytium. The result of this movement is a 'tunnel' snaking across the caecum and colon.


Author(s):  
S. Grecchi ◽  
M. Malatesta

The endocytotic pathway involves a complex, dynamic and interacting system of intracellular compartments. PKH26 is a fluorescent dye specific for long-lasting cell membrane labelling which has been successfully used for investigating cell internalization processes, at either flow cytometry or fluorescence microscopy. In the present work, diaminobenzidine photo-oxidation was tested as a procedure to detect PKH26 dye at transmission electron microscopy. Our results demonstrated that DAB-photo-oxidation is a suitable technique to specifically visualise this fluorescent dye at the ultrastructural level: the distribution of the granular dark reaction product perfectly matches the pattern of the fluorescence staining, and the electron density of the fine precipitates makes the signal evident and precisely detectable on the different subcellular compartments involved in the plasma membrane internalization routes.


2007 ◽  
Vol 5 (19) ◽  
pp. 213-222 ◽  
Author(s):  
Günter Wrobel ◽  
Matthias Höller ◽  
Sven Ingebrandt ◽  
Sabine Dieluweit ◽  
Frank Sommerhage ◽  
...  

An emerging number of micro- and nanoelectronics-based biosensors have been developed for non-invasive recordings of physiological cellular activity. The interface between the biological system and the electronic devices strongly influences the signal transfer between these systems. Little is known about the nanoscopic structure of the cell–sensor interface that is essential for a detailed interpretation of the recordings. Therefore, we analysed the interface between the sensor surface and attached cells using transmission electron microscopy (TEM). The maximum possible resolution of our TEM study, however, was restricted by the quality of the interface preparation. Therefore, we complemented our studies with imaging ellipsometry. We cultured HEK293 cells on substrates, which had been precoated with different types of proteins. We found that contact geometry between attached cell membrane and substrate was dependent on the type of protein coating used. In the presence of polylysine, the average distance of the membrane–substrate interface was in the range of 35–40 nm. However, the cell membrane was highly protruded in the presence of other proteins like fibronectin, laminin or concanavalin-A. The presented method allows the nanoscopic characterization of the cell–sensor interface.


Author(s):  
G. G. Shaw

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.


Author(s):  
R. W. Anderson ◽  
D. L. Senecal

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.


Author(s):  
S. Fujishiro

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.


Sign in / Sign up

Export Citation Format

Share Document