scholarly journals Study on the effect of building envelope on cooling load and life-cycle cost in low latitude and hot-humid climate

2017 ◽  
Vol 205 ◽  
pp. 975-982 ◽  
Author(s):  
Hang Wu ◽  
Dengjia Wang ◽  
Yanfeng Liu ◽  
Yingying Wang
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Building Envelope ◽  
Cooling Load ◽  
Humid Climate ◽  
Low Latitude ◽  
Hot Humid Climate

scholarly journals Optimal Renovation Strategies through Life-Cycle Analysis in a Pilot Building Located in a Mild Mediterranean Climate

2021 ◽  
Vol 11 (4) ◽  
pp. 1423
Author(s):  
José Manuel Salmerón Lissen ◽  
Cristina Isabel Jareño Escudero ◽  
Francisco José Sánchez de la Flor ◽  
Miriam Navarro Escudero ◽  
Theoni Karlessi ◽  
...  
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Mediterranean Climate ◽  
Building Envelope ◽  
Economic Life ◽  
Hot Water ◽  
Optimal Solutions ◽  
Building Stock ◽  
Existing Building ◽  
The Cost

The 2030 climate and energy framework includes EU-wide targets and policy objectives for the period 2021–2030 of (1) at least 55% cuts in greenhouse gas emissions (from 1990 levels); (2) at least 32% share for renewable energy; and (3) at least 32.5% improvement in energy efficiency. In this context, the methodology of the cost-optimal level from the life-cycle cost approach has been applied to calculate the cost of renovating the existing building stock in Europe. The aim of this research is to analyze a pilot building using the cost-optimal methodology to determine the renovation measures that lead to the lowest life-cycle cost during the estimated economic life of the building. The case under study is an apartment building located in a mild Mediterranean climate (Castellon, SP). A package of 12 optimal solutions has been obtained to show the importance of the choice of the elements and systems for renovating building envelopes and how energy and economic aspects influence this choice. Simulations have shown that these packages of optimal solutions (different configurations for the building envelope, thermal bridges, airtightness and ventilation, and domestic hot water production systems) can provide savings in the primary energy consumption of up to 60%.

Flex House

2011 ◽  
Author(s):  
Stanley Russell ◽  
Mark Weston ◽  
Yogi Goswami ◽  
Matthew Doll
Keyword(s):  
Closed System ◽  
State Of The Art ◽  
Building Envelope ◽  
Passive Cooling ◽  
Optimum Level ◽  
Seasonal Temperature ◽  
Zero Energy ◽  
Humid Climate ◽  
Heat Gain ◽  
Hot Humid Climate

Flex House is a flexible, modular, pre-fabricated zero energy building that can be mass produced and adapted easily to a variety of site conditions and plan configurations. The key factor shaping the design is central Florida’s hot humid climate and intense solar radiation. Flex house combines the wisdom of vernacular Florida houses with state of the art Zero Energy House technologies (ZEH.) A combined system of photovoltaic panels and solar thermal concentrating panels take advantage of the region’s abundant insolation in providing clean renewable energy for the house. Conservation is achieved with state of the art mechanical systems and innovative liquid desiccant dehumidification technology along with highly efficient lighting and appliances. The hybrid nature of the Flex house allows for both an open and closed system to take advantage of the seasonal temperature variation. Central Florida buildings can conserve energy by allowing natural ventilation to take advantage of passive cooling in the mild months of the year and use a closed system to utilize mechanical cooling when temperatures are too high for passive cooling strategies. The building envelope works equally well throughout the year combining an optimum level of insulation, resistance to air infiltration, transparency for daylight, and flexibility that allows for opening and closing of the house. Flex House is designed with a strong connection between interior spaces and the outdoors with carefully placed fenestration and a movable wall system which enables the house to transform in response to the temperature variations throughout the year. The house also addresses the massive heat gain that occurs through the roof, which can generate temperatures in excess of 140 degrees. Flex House incorporates a parasol-like outer structure that shades the roof, walls and courtyard minimizing heat gain through the building envelope. To be implemented on a large scale, ZEH must be affordable for people earning a moderate income. Site built construction is time consuming and wasteful and results in higher costs. Building homes in a controlled environment can reduce material waste, and construction costs while increasing efficiency. Pre-fabricating Flex House minimizes preparation time, waste and safety concerns and maximizes economy, quality control, efficiency and safety during the construction process. This paper is an account of the design and construction of Flex House, a ZEH for central Florida’s hot humid climate.

scholarly journals BIM-VE-Based Optimization of Green Building Envelope from the Perspective of both Energy Saving and Life Cycle Cost

2020 ◽  
Vol 12 (19) ◽  
pp. 7862
Author(s):  
Zhenmin Yuan ◽  
Jianliang Zhou ◽  
Yaning Qiao ◽  
Yadi Zhang ◽  
Dandan Liu ◽  
...  
Keyword(s):  
Life Cycle ◽  
Energy Saving ◽  
Life Cycle Cost ◽  
Architectural Design ◽  
Green Building ◽  
Building Energy ◽  
Green Buildings ◽  
Building Envelope ◽  
Analysis Model ◽  
Mathematical Formula

In the context of the increasingly severe energy crisis and global warming, green buildings and their energy-saving issues are being paid more attention in the world. Since envelope optimization can significantly reduce the energy consumption of green buildings, value engineering (VE) technology and building information modeling (BIM) technology are used to optimize the envelope of green buildings, which takes into account both energy saving and life cycle cost. The theoretical framework of optimization for green building envelope based on BIM-VE is proposed, including a BIM model for architecture, a life cycle cost analysis model, energy-saving analysis model, and a value analysis model. In the life-cycle cost model, a mathematical formula for the life-cycle cost is established, and BIM technology is used to generate a bill of quantity. In the energy-saving analysis model, a mathematical formula for energy saving is established, and BIM technology is used for the building energy simulation. In the scheme decision-making sub-model, VE technology integrating life cycle cost with energy saving is used to assess the envelope schemes and select the optimal one. A prefabricated project case is used to simulate and test the established methodology. The important results show that the 16 envelope schemes make the 16 corresponding designed buildings meet the green building evaluation standards, and the optimal envelope scheme is the “energy-saving and anti-theft door + exterior window 2+ floor 1+ exterior wall 1 + inner shear wall + inner partition wall 2 + planted roof” with the value 10.80 × 10−2 MW·h/ten thousand yuan. A significant finding is that the value generally rises with the increase of energy-saving rate while the life cycle cost is irregular with the increase of energy-saving rate. Compared with previous efforts in the literature, this study introduces VE technology into architectural design to further expand the current boundary of building energy-saving theory. The findings and suggestions will provide a valuable reference and guidance for the architectural design industry to optimize the envelope of green buildings from the perspective of both energy saving and life cycle cost.

scholarly journals An Investigation on Indoor Temperature of Modern Double Storey House with Adapted Common Passive Design Strategies of Malay Traditional House

2021 ◽  
Vol 29 (2) ◽  
Author(s):  
Maryam Qays Oleiwi ◽  
Mohd Farid Mohamed
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Building Envelope ◽  
Simulation Software ◽  
Passive Cooling ◽  
Design Strategies ◽  
Housing Type ◽  
Humid Climate ◽  
Cooling Strategies ◽  
Hot Humid Climate

Past years have witnessed the popularity of traditional Malay house as a common housing type in Malaysia. However, double-storey house has become one of the common types of low-rise housing in Malaysia. Several passive cooling strategies have been adopted to cope with the hot-humid climate of Malaysia. In this study, the thermal comfort of a double-storey house was examined when different passive cooling strategies that were adopted from traditional Malay houses were applied using IES-VE 2019 building simulation software. The simulation was conducted for various design strategies such as changing concrete roof tiles to clay roof tiles, adding two small openings to the attic, removing the ceiling between the upper floor and the attic, and extending the overhang by 50% of its length for all the four facades. All these strategies were tested and compared between full-day natural ventilation and without any ventilation. The thermal comfort of these strategies was graphically defined based on the operative temperature. These analyses revealed that protecting the building envelope by extending the overhang by 50% of its length for all the four facades could ensure the best thermal comfort is achieved compared to other selected strategies. Recommendations for further studies are also outlined in this paper.

The effect of building envelope on the thermal comfort and energy saving for high-rise buildings in hot–humid climate

2016 ◽  
Vol 53 ◽  
pp. 1508-1519 ◽  
Author(s):  
Seyedehzahra Mirrahimi ◽  
Mohd Farid Mohamed ◽  
Lim Chin Haw ◽  
Nik Lukman Nik Ibrahim ◽  
Wardah Fatimah Mohammad Yusoff ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Energy Saving ◽  
Building Envelope ◽  
Humid Climate ◽  
High Rise ◽  
Hot Humid Climate

scholarly journals Residential Solar-Based Seasonal Thermal Storage Systems in Cold Climates: Building Envelope and Thermal Storage

Energies ◽  
2012 ◽  
Vol 5 (10) ◽  
pp. 3972-3985 ◽  
Author(s):  
Alexandre Hugo ◽  
Radu Zmeureanu
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Energy Demand ◽  
Energy Use ◽  
Thermal Storage ◽  
Building Envelope ◽  
Hot Water ◽  
Cold Climates ◽  
Solar Collectors

The reduction of electricity use for heating and domestic hot water in cold climates can be achieved by: (1) reducing the heating loads through the improvement of the thermal performance of house envelopes, and (2) using solar energy through a residential solar-based thermal storage system. First, this paper presents the life cycle energy and cost analysis of a typical one-storey detached house, located in Montreal, Canada. Simulation of annual energy use is performed using the TRNSYS software. Second, several design alternatives with improved thermal resistance for walls, ceiling and windows, increased overall air tightness, and increased window-to-wall ratio of South facing windows are evaluated with respect to the life cycle energy use, life cycle emissions and life cycle cost. The solution that minimizes the energy demand is chosen as a reference house for the study of long-term thermal storage. Third, the computer simulation of a solar heating system with solar thermal collectors and long-term thermal storage capacity is presented. Finally, the life cycle cost and life cycle energy use of the solar combisystem are estimated for flat-plate solar collectors and evacuated tube solar collectors, respectively, for the economic and climatic conditions of this study.

Sign in / Sign up

Export Citation Format

Share Document