Optimization of FAME production from blends of waste cooking oil and refined palm oil using biomass fly ash as a catalyst

The continued using of petroleum energy as a sourced for fuel is widely recognized as unsustainable because of the decreasing of supplies while increasing of the demand. Therefore, it becomes a global agenda to develop a renewable, sustainable and alternative fuel to meets with all the demand. Thus, biodiesel seems to be one of the best choices. In Malaysia, the biodiesel used is from edible vegetable oil sources; palm oil. The uses of palm oil as biodiesel production source have been concern because of the competition with food materials. In this study, various types of biodiesel feedstock are being studied and compared with diesel. The purpose of this comparison is to obtain the optimum engine performance of these different types of biodiesel (edible, non-edible, waste cooking oil) on which are more suitable to be used as alternative fuel. The optimum engine performance effect can be obtains by considering the Brake Power (BP), Specific Fuel Consumption (SFC), Exhaust Gas Temperature (EGT) and Brake Thermal Efficiency (BTE).

Download Full-text

Ultrasound strengthened biodiesel production from waste cooking oil using modified coal fly ash as catalyst

Journal of Environmental Chemical Engineering ◽

10.1016/j.jece.2015.12.031 ◽

2016 ◽

Vol 4 (1) ◽

pp. 818-824 ◽

Cited By ~ 12

Author(s):

Yulin Xiang ◽

Lipeng Wang ◽

Yurong Jiao

Keyword(s):

Fly Ash ◽

Coal Fly Ash ◽

Waste Cooking Oil ◽

Biodiesel Production ◽

Cooking Oil

Download Full-text

Toxicity of water-soluble fractions of biodiesel fuels derived from castor oil, palm oil, and waste cooking oil

Environmental Toxicology and Chemistry ◽

10.1002/etc.444 ◽

2011 ◽

Vol 30 (4) ◽

pp. 893-897 ◽

Cited By ~ 27

Author(s):

Maria Bernadete Neiva Lemos Leite ◽

Milena Maria Sampaio de Araújo ◽

Iracema Andrade Nascimento ◽

Andrea Cristina Santos da Cruz ◽

Solange Andrade Pereira ◽

...

Keyword(s):

Palm Oil ◽

Oil Palm ◽

Castor Oil ◽

Waste Cooking Oil ◽

Water Soluble ◽

Cooking Oil ◽

Biodiesel Fuels ◽

Soluble Fractions

Download Full-text

PROSES PEMBUATAN BIODIESEL DARI CAMPURAN MINYAK KELAPA DAN MINYAK JELANTAH

Konversi ◽

10.20527/k.v5i1.4772 ◽

2018 ◽

Vol 5 (1) ◽

pp. 8

Author(s):

Muthia Elma ◽

Satria Anugerah Suhendra ◽

Wahyuddin Wahyuddin

Keyword(s):

Water Content ◽

Palm Oil ◽

Raw Materials ◽

Coconut Oil ◽

Waste Cooking Oil ◽

Acid Number ◽

Esterification Reaction ◽

Cooking Oil ◽

Ester Content ◽

Total Glycerol

Abstrak-Indonesia memiliki hasil produksi buah kelapa yang hanya dimanfaatkan untuk memasak. Minyak jelantah merupakan hasil dari sisa penggorengan rumah tangga yang setelah penggunaanya menjadi limbah dan dapat mencemari lingkungan. Penelitian ini bertujuan untuk memproduksi biodiesel dengan memanfaatkan campuran antara minyak kelapa dan minyak jelantah terhadap efek penambahan metanol dan waktu reaksi optimum dari pembuatan biodiesel. Proses produksi biodiesel dari campuran kedua bahan baku menggunakan proses dimana minyak kelapa dan minyak jelantah dicampurkan berdasarkan %-v/v dari 200 mL dengan perbandingan minyak jelantah (MJ) dan minyak kelapa (MK) yaitu 100MJ:0MK; 75MJ:25MK; 50MJ:50MK; 25MJ:75MK; dan 0MJ:100MK dengan komposisi metanol serta esterifikasi 38%; 30%; 28%; 19% serta untuk trasesterifikasi 19%; 20%; 21%; 25%. Pada reaksi esterifikasi menggunakan komposisi katalis H2SO4 0,5%, dan transesterifikasi menggunakan katalis KOH 0,9%. Yield yang dihasilkan dari penelitian ini adalah: 100MJ:0MK 92,15%; 93,65%, 75MJ:25MK (96,65%), 50MJ:50MK (95,11%), 25MJ:25MK (96,65%) dan 100MK:0MJ (82,65%). Analisa gliserol total yang didapat pada penelitian ini adalah 100MJ:0M (0,19%), 75MJ:25MK (0,21%), 50MJ:50MK (0,23%) 25MJ:25MK (0,22%) dan 100MK:0MJ (0,26%). Dari hasil analisa gliserol total tersebut didapat sampel yang terbaik yakni 50MJ:50MK dengan nilai glirserol total 0,23% dengan waktu 60 menit untuk esterifikasi dan 70 menit untuk transesterifikasi, dengan analisa angka asam yang didapatkan sebesar 0,2117, angka penyabunan 198,41; ester content yang didapat sebesar 98,163% water content untuk sebesar 0,56 ppm. Keseluruhan dari hasil analisa biodiesel tersebut memenuhi standar EN 14214. Kata kunci: minyak kelapa, minyak jelantah, biodiesel, FFA, trigliserida, gliserol total. Abstract-Coconut oil is normally produced as cooking oil in some areas in Indonesia. However, palm oil mostly produced by industries as vegetable/cooking oil.Waste cooking oil from palm oil becomes a big problem in the environment, and creates pollution. This research aims to use waste cooking oil to produce biodiesel by mixing waste cooking oil and coconut oil. Those mixed oils become raw materials for this proces. The composition of the mixtures are 100MJ: 0MK; 75MJ: 25MK; 50MJ: 50MK; 25MJ: 75MK; and 0MJ: 100MK (% v / v of waste cooking oil (MJ) and coconut oil (MK)).The total of 200 mL oil mixtures was used for the esterification process with methanol composition were 38%; 30%; 28%; and trans-esterification were 19%; 20%; 21%; 23%. Esterification reaction was using the 0,5% H2SO4 as a catalyst, while transesterification was using 0.9% KOH as catalyst. The yield of biodiesel this reaserch were: 100MJ: 0MK (92.15%), 75MJ: 25MK (96.65%), 50MJ: 50MK (95.11%), 25MJ: 25MK (96.65%) and 100MK: 0MJ (82.65%). Furthermore, the total glycerol values were 100MJ:0MK (0.19%), 75MJ: 25MK (0.21%), 50MJ:50MK (0.23%) 25MJ: 25MK (0.22%) and 100MK: 0MJ (0.26%). EN14214 standard shows that the best composition of mixtured oils was 50MJ:50MK. Then, the total glycerol was 0.23% (60-70 minutes for the esterification and transesterification reaction). Acid number value was 0.2117, saponification number was 198.41; ester content was 98.163% and water content was 0.56 ppm. Keywords: coconut oil, waste cooking oil, biodiesel, FFA, triglyceride, total glycerol.

Download Full-text

Effect of addition of plastic pyrolytic oil and waste cooking oil biodiesel in palm oil biodiesel–commercial diesel blends on diesel engine performance, emission, and lubricity

Energy & Environment ◽

10.1177/0958305x211034822 ◽

2021 ◽

pp. 0958305X2110348

Author(s):

Muhamad SN Awang ◽

Nurin WM Zulkifli ◽

Muhammad M Abbas ◽

Syahir A Zulkifli ◽

Mohd NAM Yusoff ◽

...

Keyword(s):

Diesel Engine ◽

Palm Oil ◽

Engine Performance ◽

Fuel Mixture ◽

Waste Cooking Oil ◽

Pyrolysis Oil ◽

Waste Plastic ◽

Performance And Emission ◽

Cooking Oil ◽

Palm Oil Biodiesel

The main purposes of this research were to study the diesel engines' performance and emission characteristics of quaternary fuels, as well as to analyze their tribological properties. The quaternary comprised waste plastic pyrolysis oil, waste cooking oil biodiesel, palm oil biodiesel, and commercial diesel. Their compositions were analyzed by gas chromatography and mass spectrometry. By using mechanical stirring, four quaternary fuels with different compositions were prepared. Because Malaysia is expected to implement B30 (30% palm oil biodiesel content in diesel) in 2025, B30a (30% palm oil biodiesel and 70% commercial diesel) mixture was prepared as a reference fuel. In total, 5%, 10%, and 15% of each waste plastic pyrolysis oil and waste cooking oil biodiesel were mixed with palm oil biodiesel –commercial diesel mixture to improve fuel characteristics, engine performance, and emission parameters. The palm oil biodiesel of the quaternary fuel mixture was kept constant at 10%. The results were compared with B30a fuel and B10 (10% for palm oil biodiesel and 90% for diesel; commercial diesel). The findings indicated that compared with B30a fuel, the brake power and brake thermal efficiency of all quaternary fuel mixtures were increased by up to 2.78% and 9.81%, respectively. Compared with B30a, all quaternary fuels also showed up to a 6.31% reduction in brake-specific fuel consumption. Compared with B30a, the maximum carbon monoxide and carbon dioxide emissions of B40 (60% commercial diesel, 10% palm oil biodiesel, 15% waste plastic pyrolysis oil and 15% waste cooking oil biodiesel) quaternary fuel were reduced by 19.66% and 4.16%, respectively. The B20 (80% commercial diesel, 10% palm oil biodiesel, 5% waste plastic pyrolysis oil and 5% waste cooking oil biodiesel) quaternary blend showed a maximum reduction of 41.86% in hydrocarbon emissions collated to B30a. Compared with B10, the average coefficient of friction of the quaternary fuel mixture of B40, B30b (70% commercial diesel, 10% palm oil biodiesel, 10% waste plastic pyrolysis oil and 10% waste cooking oil biodiesel), and B20 were reduced by 3.01%, 1.20%, and 0.23%, respectively. Therefore, the quaternary blends show excellent utilization potential in diesel engine performance.

Download Full-text