scholarly journals Stretched-pulse generation in all-fiber mode-locked erbium-doped fiber laser using Lawsone dye saturable absorber

2021 ◽  
Vol 5 ◽  
pp. 100148
Author(s):  
Rawan S.M. Soboh ◽  
Ahmed H.H. Al-Masoodi ◽  
Retna Apsari ◽  
Fuad. N.A. Erman ◽  
Ab. H.H. Al-Masoodi ◽  
...  
2017 ◽  
Vol 9 (3) ◽  
pp. 100 ◽  
Author(s):  
Fauziah Che Mat ◽  
Moh Yasin ◽  
Anas Abdul Latiff ◽  
Sulaiman Wadi Harun

All-fiber passively Q-switched fiber lasers have been demonstrated by using graphene oxide (GO) Q-switcher for possible applications in telecommunication, laser processing, fiber sensing and medical community. The GO material was obtained through a modified Hummers method from expanded acid washed graphite flakes and it was embedded into a polyvinyl alcohol (PVA) film to form a saturable absorber (SA) device. The Q-switched pulse operates at 1563.3 nm with a repetition rate that can be tuned from 44.33 kHz to 61.77 kHz as the pump power changes from 39 mW to 96 mW. The highest repetition rate of 61.77 kHz is achieved at a pump power of 96 mW and it is observed that the Q-switched pulse produced maximum pulse energy of 0.054 nJ and pulse width of 5.57 ?s at 96 mW pump power. Full Text: PDF ReferencesJ. Zayhowski and C. Dill, "Coupled-cavity electro-optically Q-switched Nd:YVO4 microchip lasers", Optics letters 20, 716 (1995). CrossRef C.-x. Gao, W. Zhao, Y.-s. Wang, S.-l. Zhu, G.-f. Chen, and Y.-g. Wang, "Passive Q-switched fiber laser with SESAM in ytterbium-doped double-clad fiber", 27th International congress on High-Speed Photography and Photonics, 62794G (2007). CrossRef M. Ahmed, N. Ali, Z. Salleh, A. Rahman, S. Harun, M. Manaf, "Q-switched erbium doped fiber laser based on single and multiple walled carbon nanotubes embedded in polyethylene oxide film as saturable absorber", Optics & Laser Technology 65, 25 (2015). CrossRef S. Harun, M. Ismail, F. Ahmad, M. Ismail, R. Nor, N. Zulkepely, et al., "A Q-switched erbium-doped fiber laser with a carbon nanotube based saturable absorber", Chinese Physics Letters 29, 114202 (2012). CrossRef A. Martinez and Z. Sun, "Nanotube and graphene saturable absorbers for fibre lasers", Nat Photon 7, 842 (2013). CrossRef J. Boguslawski, J. Sotor, G. Sobon, R. Kozinski, K. Librant, M. Aksienionek, et al., "Graphene oxide paper as a saturable absorber for Er- and Tm-doped fiber lasers", Photonics Research 3, 119 (2015). CrossRef H. Ahmad, F. D. Muhammad, M. Z. Zulkifli, and S. W. Harun, "Q-switched pulse generation from an all-f iber distributed Bragg reflector laser using graphene as saturable absorber", Chinese Optics Letters 11, 071401 (2013). CrossRef


2021 ◽  
Vol 13 (3) ◽  
pp. 55
Author(s):  
Nabihah Hussain ◽  
Mohd Rashidi Salim ◽  
Asrul Izam Azmi ◽  
Muhammad Yusof Mohd Noor ◽  
Ahmad Sharmi Abdullah ◽  
...  

This paper explains about the performance of graphene nanopowder (GNP) based saturable absorber (SA) at 1.5-micron region which is prepared by dissolution in polyvinyl alcohol (PVA) polymer. Two different GNP flakes thickness (AO2-8 nm and AO4-60 nm) are tested. By applying a solution casting method, three weight ratio of GNP to PVA (12.04, 8.03 and 3.11 wt.%) have been prepared and fabricated as a composite thin film. To characterize for the SA performance, 4 mm2 area of GNP-PVA thin film is embedded in a 14 meters long ring cavity with 3 meters Erbium doped fiber (EDF) as a gain medium. Our characterization results show that the GNP-PVA thin film act as a Q-switcher which produce stable laser pulses for 12.04 wt.% with maximum repetition rate of 39.22 kHz and shortest pulse width of 11.79 µs. Meanwhile, unstable Q-switched pulses of 8.03 wt.% and 3.11 wt.% have been observed with recorded signal to noise ratio (SNR) of only 21 dB and 17 dB, respectively. The threshold pumping power for Q-switched lasing to emerge is recorded as low as 30 mW. Apparently, it shows that GNP concentration and flakes thickness in fabricated SA composite plays vital role in the performance of generated Q-switch laser, particularly at 1.5 µm region. Full Text: PDF ReferencesT. Hasan, Z. Sun, F. Wang, F. Bonaccorso, P.H. Tan, A.G. Rozhin, A.C. Ferrari, "Nanotube–Polymer Composites for Ultrafast Photonics", Adv. Mater. 21, 3874 (2009). CrossRef Q. Bao, H. Zhang, Y. Wang, Z. Ni, Y. Yan, Z.X. Shen, K.P. Loh, D.Y. Tang, "Atomic-Layer Graphene as a Saturable Absorber for Ultrafast Pulsed Lasers", Adv. Funct. Mater. 19, 3077 (2009). CrossRef Z. Luo, M. Zhou, J. Weng, G. Huang, H. Xu, C. Ye, Z. Cai, Opt. Lett. 35(21), 3709 (2010). CrossRef D. Popa, Z. Sun, T. Hasan, F. Torrisi, F. Wang, A.C. Ferrari, "Graphene Q-switched, tunable fiber laser", Appl. Phys. Lett. 98, 3106 (2011). CrossRef Y.M. Chang, H. Kim, J.H. Lee, Y. Song, "Multilayered graphene efficiently formed by mechanical exfoliation for nonlinear saturable absorbers in fiber mode-locked lasers", Appl. Phys. Lett. 97, 211102 (2010). CrossRef M. Jiang, Z. Ren, Y. Zhang, B. Lu, R. Zhang, J. Guo, Y. Zhou, J. Bai, "Passive Q-Switching with Graphene Saturable Absorber in Nd:YAG Operating at 1064nm", Mater. Sci. Forum 694, 700 (2011). CrossRef N. Hussin, M.H. Ibrahim, F. Ahmad, H. Yahaya, S.W. Harun, "Graphene Nanoplatelets (GnP)-PVA Based Passive Saturable Absorber", Telkomnika 15(2), 814 (2017). CrossRef F.C. Mat, M. Yasin, A.A. Latiff, S.W. Harun, Photonics Letters of Poland 9, 100 (2017). CrossRef E.K. Ng, K.Y. Lau, H.K. Lee, N.M. Yusoff, A.R. Sarmani, M.F. Omar, M.A. Mahdi, "L-band femtosecond fiber laser based on a reduced graphene oxide polymer composite saturable absorber", Opt. Mater. Express 11, 59 (2021). CrossRef N.H.M. Apandi, S.N.F. Zuikafly, N. Kasim, M.A. Mohamed, S.W. Harun, F. Ahmad, "Observation of dark and bright pulses in q-switched erbium doped fiber laser using graphene nano-platelets as saturable absorber", Bull. Electr. Eng. Inform. 8, 1358 (2019). CrossRef N.U.H.H.B. Zalkepali, N.A. Awang, Y.R. Yuzaile, Z. Zakaria, A.A. Latif and F. Ahmad, "Graphene Nanoplatelets as Saturable Absorber for Mode-locked Fiber Laser Generation", J. Adv. Res. Dyn. Control Syst. 12(2), 602 (2020). CrossRef X. Zhu and S. Chen, "Autoencoder-Based Transceiver Design for OWC Systems in Log-Normal Fading Channel", IEEE Photonics J. 11, 7105109 (2019). CrossRef


2016 ◽  
Vol 8 (4) ◽  
pp. 104 ◽  
Author(s):  
Sulaiman Wadi Harun ◽  
Mukul C. Paul ◽  
Shyamal Das ◽  
Anirban Dhar ◽  
Harith Ahmad

A passively mode-locked Thulium Ytterbium co-doped fiber laser (TYDFL) is demonstrated using a graphene polyvinyl alcohol saturable absorber as the mode-locker. With 980 nm multimode pumping, the laser operates at 1942.95 nm with repetition rate of 11.76 MHz. The pulse width is calculated to be around 52.85 ps. The maximum pulse energy of 1190.5 pJ is achieved at pump power of 1750 mW. Full Text: PDF ReferencesJ. Sotor et al., "Ultrafast thulium-doped fiber laser mode locked with black phosphorus", Opt. Lett. 40, 3885-3888 (2015) CrossRef J. Wang et al., "152 fs nanotube-mode-locked thulium-doped all-fiber laser", Nature Scientific Reports 6, 28885 (2016) CrossRef I. M. Babar et al., "Double-clad thulium/ytterbium co-doped octagonal-shaped fibre for fibre laser applications", Ukr. J. Phys. Opt. 15, 173-183 (2014) CrossRef Harun et al., "Mode-locked bismuth-based erbium-doped fiber laser with stable and clean femtosecond pulses output", Laser Phys. Lett. 8, 449-452 (2011) CrossRef M. A. Ismail et al., "Nanosecond soliton pulse generation by mode-locked erbium-doped fiber laser using single-walled carbon-nanotube-based saturable absorber", Applied Optics 51, 8621-8624 (2012) CrossRef G. Sobon et al., "Graphene Oxide vs. Reduced Graphene Oxide as saturable absorbers for Er-doped passively mode-locked fiber laser", Opt. Express 20, 19463-19473 (2012) CrossRef G. Sobon et al., "Thulium-doped all-fiber laser mode-locked by CVD-graphene/PMMA saturable absorber", Opt. Express 21, 12797-12802 (2013) CrossRef


2016 ◽  
Vol 8 (4) ◽  
pp. 101 ◽  
Author(s):  
Nur Hidayah Muhammad Apandi ◽  
Fauzan Ahmad ◽  
Siti Nur Fatin Zuikafly ◽  
Mohd Haniff Ibrahim ◽  
Sulaiman Wadi Harun

We demonstrate a passive Q-switched at 2 um region by integrating Bismuth (III) Telluride (Bi2/Te3) embedded in Polyvinyl Alcohol (PVA). Bi2Te3 was embedded in PVA by solution casting approach to develop a Bi2/Te3-PVA film and integrated in the laser cavity with ring configuration to generate pulse laser. The experimental works show that the proposed passive saturable absorber operates at input pump power ranges from 637 mW to 784 mW with central wavelength of 1957.6 nm. We observed the tunable repetition rate from 12.6 kHz to 26.1 kHz with the shortest pulse width of 2.22 us. The laser produces maximum instantaneous output peak power and pulse energy of 0.42 W and 0.94 uJ, respectively. Full Text: PDF ReferencesC. Zhao, H. Zhang, X. Qi, Y. Chen, Z. Wang, S. Wen, and D. Tang, "Ultra-short pulse generation by a topological insulator based saturable absorber", Appl. Phys. Lett. 101, 211106 (2012). CrossRef Z. C. Luo, M. Liu, H. Liu, X.-W. Zheng, A.-P. Luo, C.-J. Zhao, H. Zhang, S. C. Wen, and W.-C. Xu, "2GHz passively harmonic mode-locked fiber laser by a microfiber-based topological insulator saturable absorber", Opt. Lett. 38, 5212 (2013). CrossRef J. Lee, J. Koo, Y. M. Jhon, and J. H. Lee, "A femtosecond pulse erbium fiber laser incorporating a saturable absorber based on bulk-structured Bi2Te3 topological insulator", Opt. Express 22, 6165 (2014). CrossRef M. Jung, J. Lee, J. Koo, J. Park, Y. W. Song, K. Lee, S. Lee, and J. H. Lee, "A femtosecond pulse fiber laser at 1935 nm using a bulk-structured Bi2Te3 topological insulator", Opt. Express 22, 7865(2014). CrossRef Y. H. Lin, C. Y. Yang, S.-F. Lin, W. H. Tseng, Q. Bao, C. I. Wu, and G.R. Lin, "Soliton compression of the erbium-doped fiber laser weakly started mode-locking by nanoscale p-type Bi2Te3 topological insulator particles", Laser Phys. Lett. 11, 055107(2014). CrossRef J. Lee et al., "All-fiberized, passively Q-switched 1.06 ?m laser using a bulk-structured Bi2Te3 topological insulator", Journal of Optics 16, 085203(2014). CrossRef Y. Chen, et al., "Large Energy, Wavelength Widely Tunable, Topological Insulator Q-Switched Erbium-Doped Fiber Laser", IEEE Journal of Selected Topics in Quantum Electronics 20, 315(2014). CrossRef M. Wu et al., "Nanosecond Q -Switched Erbium-Doped Fiber Laser With Wide Pulse-Repetition-Rate Range Based on Topological Insulator", IEEE Journal of Quantum Electronics 50, 393(2014). CrossRef J. Lee et al., "Dry Etched Waveguide Laser Diode on GeOI", IEEE Journal of Selected Topics in Quantum Electronics 21, 31(2015). CrossRef J. Li et al., "3-?m mid-infrared pulse generation using topological insulator as the saturable absorber ", Optics Letters 40, 3659(2015). CrossRef Z. Luo et al., "Topological-Insulator Passively Q-Switched Double-Clad Fiber Laser at 2 ?m Wavelength", IEEE J. Sel. Topics Quantum Electron 20, 0902708 (2014). CrossRef M. C. Paul, A. Dhar, S. Das, A. A. Latiff,M. T. Ahmad,and S. W. Harun, "Enhanced Erbium?Zirconia?Yttria?Aluminum Co-Doped Fiber Amplifier" IEEE Photonics Journal 7, 7100408 (2015). CrossRef H. Liu et al., "Femtosecond pulse generation from a topological insulator mode-locked fiber laser", Optics Express 22, 6868 (2014). CrossRef Z. Sun, T. Hasan, and A. C. Ferrari, "Ultrafast lasers mode-locked by nanotubes and graphene", Physica E 44, 1082(2012). CrossRef J. Lee, M. Jung, J. Koo, C. Chi, and J. Lee, "Dry Etched Waveguide Laser Diode on GeOI", IEEE Journal of Selected Topics in Quantum Electronics 21, 0900206 (2015). CrossRef H. Ahmad, A. Z. Zulkifli, K. Thambiratnam, and S. W. Harun, "2.0-?m Q-Switched Thulium-Doped Fiber Laser With Graphene Oxide Saturable Absorber", IEEE Photonics Journal5, 1501108(2013). CrossRef


2012 ◽  
Vol 51 (36) ◽  
pp. 8621 ◽  
Author(s):  
Mohd Afiq Ismail ◽  
Sulaiman Wadi Harun ◽  
Nurul Rozullyah Zulkepely ◽  
Roslan Md Nor ◽  
Fauzan Ahmad ◽  
...  

2021 ◽  
Vol 136 ◽  
pp. 106525
Author(s):  
Y.R. Yuzaile ◽  
Z. Zakaria ◽  
N.A. Awang ◽  
N.U.H.H. Zalkepali

Sign in / Sign up

Export Citation Format

Share Document