Real-world emissions and fuel consumption of gasoline and hybrid light duty vehicles under local and regulatory drive cycles

2022 ◽  
Vol 805 ◽  
pp. 150407
Author(s):  
Ran Tu ◽  
Junshi Xu ◽  
An Wang ◽  
Mingqian Zhang ◽  
Zhiqiang Zhai ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Real World ◽  
Light Duty ◽  
Light Duty Vehicles

scholarly journals Estimation of Real-World Fuel Consumption Rate of Light-Duty Vehicles Based on the Records Reported by Vehicle Owners

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7915
Author(s):  
Isabella Yunfei Zeng ◽  
Shiqi Tan ◽  
Jianliang Xiong ◽  
Xuesong Ding ◽  
Yawen Li ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Real World ◽  
Consumption Rate ◽  
The Real ◽  
Fuel Consumption Rate ◽  
Light Gradient ◽  
Light Duty ◽  
Light Duty Vehicle ◽  
Light Duty Vehicles ◽  
Engine Power

Private vehicle travel is the most basic mode of transportation, so that an effective way to control the real-world fuel consumption rate of light-duty vehicles plays a vital role in promoting sustainable economic growth as well as achieving a green low-carbon society. Therefore, the factors impacting individual carbon emissions must be elucidated. This study builds five different models to estimate the real-world fuel consumption rate of light-duty vehicles in China. The results reveal that the light gradient boosting machine (LightGBM) model performs better than the linear regression, naïve Bayes regression, neural network regression, and decision tree regression models, with a mean absolute error of 0.911 L/100 km, a mean absolute percentage error of 10.4%, a mean square error of 1.536, and an R-squared (R2) value of 0.642. This study also assesses a large pool of potential factors affecting real-world fuel consumption, from which the three most important factors are extracted, namely, reference fuel-consumption-rate value, engine power, and light-duty vehicle brand. Furthermore, a comparative analysis reveals that the vehicle factors with the greatest impact are the vehicle brand, engine power, and engine displacement. The average air pressure, average temperature, and sunshine time are the three most important climate factors.

Impact factors of the real-world fuel consumption rate of light duty vehicles in China

Energy ◽  
2020 ◽  
Vol 190 ◽  
pp. 116388 ◽  
Author(s):  
Tian Wu ◽  
Xiao Han ◽  
M. Mocarlo Zheng ◽  
Xunmin Ou ◽  
Hongbo Sun ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Real World ◽  
Consumption Rate ◽  
Impact Factors ◽  
The Real ◽  
Fuel Consumption Rate ◽  
Light Duty ◽  
Light Duty Vehicles

scholarly journals Estimation of Real-world Fuel Consumption Rate of Light-duty Vehicles Based on Big Data

2021 ◽  
Author(s):  
Isabella Yunfei Zeng ◽  
Shiqi Tan ◽  
Jianliang Xiong ◽  
Xuesong Ding ◽  
Yawen Li ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Real World ◽  
Consumption Rate ◽  
Effective Control ◽  
Fuel Consumption Rate ◽  
Light Duty ◽  
Light Duty Vehicle ◽  
Light Duty Vehicles ◽  
The Impact ◽  
Engine Power

Private vehicle travel is the most basic mode of transportation, and the effective control of the real-world fuel consumption rate of light-duty vehicles plays a vital role in promoting sustainable economic development as well as achieving a green low-carbon society. Therefore, the impact factors of individual carbon emission must be elucidated. This study builds five different models to estimate real-world fuel consumption rate of light-duty vehicles in China. The results reveal that the Light Gradient Boosting Machine (LightGBM) model performs better than the linear regression, Naïve Bayes regression, Neural Network regression, and Decision Tree regression models, with mean absolute error of 0.911 L/100 km, mean absolute percentage error of 10.4%, mean square error of 1.536, and R squared (R2) of 0.642. This study also assesses a large number of factors, from which three most important factors are extracted, namely, reference fuel consumption rate value, engine power and light-duty vehicle brand. Furthermore, a comparative analysis reveals that the vehicle factors with greater impact on real-world fuel consumption rate are vehicle brand, engine power, and engine displacement. Average air pressure, average temperature, and sunshine time are the three most important climate factors.

scholarly journals Multilayer Perceptron Method to Estimate Real-World Fuel Consumption Rate of Light Duty Vehicles

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 63395-63402 ◽  
Author(s):  
Yawen Li ◽  
Guangcan Tang ◽  
Jiameng Du ◽  
Nan Zhou ◽  
Yue Zhao ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Real World ◽  
Multilayer Perceptron ◽  
Consumption Rate ◽  
Fuel Consumption Rate ◽  
Light Duty ◽  
Light Duty Vehicles

Dealing with the Gap between Type-Approval and In-Use Light Duty Vehicles Fuel Consumption and CO2 Emissions: Present Situation and Future Perspective

2018 ◽  
Vol 2672 (2) ◽  
pp. 23-32 ◽  
Author(s):  
Jelica Pavlovic ◽  
Konstantinos Anagnostopoulos ◽  
Michael Clairotte ◽  
Vincenzo Arcidiacono ◽  
Georgios Fontaras ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Real World ◽  
Test Procedure ◽  
Present Situation ◽  
Future Perspective ◽  
Type Approval ◽  
Real Driving Emission ◽  
Light Duty ◽  
The Difference ◽  
Light Duty Vehicles

There is increasing evidence suggesting that real-world fuel consumption and CO2 improvements in the last decade have been much less than those measured during type-approval tests. Scientific studies have found that the offset between officially reported values and real-world vehicle CO2 emissions in Europe has constantly increased over the last years. The difference between officially reported and actual CO2 emissions of vehicles has three main implications: (i) it undermines the effectiveness of CO2 regulations in reducing greenhouse gas emissions in Europe; (ii) it distorts competition between vehicle manufacturers; (iii) it undermines innovation. As a fundamental step to deal with this issue, the European Commission has already replaced the old and outdated test procedure used so far in the emission type-approval of vehicles with the worldwide harmonized light vehicles test procedure (WLTP). Being a lab-based test procedure, the WLTP, by its nature, can only cover part of the CO2 gap. There is therefore increasing pressure to integrate the current type-approval system with additional measures based on real-world measurements. One of the options under discussion is to use the CO2 emissions measured during the real driving emission test. The objective of the present paper is to assess the validity of this proposal and to propose other possible ways to deal with the CO2/fuel consumption gap. In particular, the paper presents experimental evidence on the variability of the CO2/fuel consumption of a vehicle, questioning the idea that a single central estimate of these quantities may be sufficient.

Powertrain Waste Heat Recovery: A Systems Approach to Maximize Drivetrain Efficiency

2012 ◽  
Author(s):  
Kevin Laboe ◽  
Marcello Canova
Keyword(s):  
Fuel Consumption ◽  
Waste Heat Recovery ◽  
Systems Approach ◽  
Waste Heat ◽  
Combustion Engine ◽  
Heat Energy ◽  
Engine Oils ◽  
Engine Cooling ◽  
Light Duty ◽  
Light Duty Vehicles

Up to 65% of the energy produced in an internal combustion engine is dissipated to the engine cooling circuit and exhaust gases [1]. Therefore, recovering a portion of this heat energy is a highly effective solution to improve engine and drivetrain efficiency and to reduce CO2 emissions, with existing vehicle and powertrain technologies [2,3]. This paper details a practical approach to the utilization of powertrain waste heat for light vehicle engines to reduce fuel consumption. The “Systems Approach” as described in this paper recovers useful energy from what would otherwise be heat energy wasted into the environment, and effectively distributes this energy to the transmission and engine oils thus reducing the oil viscosities. The focus is on how to effectively distribute the available powertrain heat energy to optimize drivetrain efficiency for light duty vehicles, minimizing fuel consumption during various drive cycles. To accomplish this, it is necessary to identify the available powertrain heat energy during any drive cycle and cold start conditions, and to distribute this energy in such a way to maximize the overall efficiency of the drivetrain.

The WLTC vs NEDC: A Case Study on the Impacts of Driving Cycle on Engine Performance and Fuel Consumption

2021 ◽  
Vol 18 (3) ◽  
pp. 9071-9081
Author(s):  
Jakub Lasocki
Keyword(s):  
Fuel Consumption ◽  
Combustion Engine ◽  
Engine Performance ◽  
Driving Cycle ◽  
Performance Characteristics ◽  
Pollutant Emission ◽  
Strong Impact ◽  
Light Duty ◽  
Light Duty Vehicles

The World-wide harmonised Light-duty Test Cycle (WLTC) was developed internationally for the determination of pollutant emission and fuel consumption from combustion engines of light-duty vehicles. It replaced the New European Driving Cycle (NEDC) used in the European Union (EU) for type-approval testing purposes. This paper presents an extensive comparison of the WLTC and NEDC. The main specifications of both driving cycles are provided, and their advantages and limitations are analysed. The WLTC, compared to the NEDC, is more dynamic, covers a broader spectrum of engine working states and is more realistic in simulating typical real-world driving conditions. The expected impact of the WLTC on vehicle engine performance characteristics is discussed. It is further illustrated by a case study on two light-duty vehicles tested in the WLTC and NEDC. Findings from the investigation demonstrated that the driving cycle has a strong impact on the performance characteristics of the vehicle combustion engine. For the vehicles tested, the average engine speed, engine torque and fuel flow rate measured over the WLTC are higher than those measured over the NEDC. The opposite trend is observed in terms of fuel economy (expressed in l/100 km); the first vehicle achieved a 9% reduction, while the second – a 3% increase when switching from NEDC to WLTC. Several factors potentially contributing to this discrepancy have been pointed out. The implementation of the WLTC in the EU will force vehicle manufacturers to optimise engine control strategy according to the operating range of the new driving cycle.

Analysis of emissions from various driving cycles based on real driving measurements obtained in a high-altitude city

2020 ◽  
Vol 234 (6) ◽  
pp. 1563-1571 ◽  
Author(s):  
Meng Lyu ◽  
Xiaofeng Bao ◽  
Yunjing Wang ◽  
Ronald Matthews
Keyword(s):  
High Altitude ◽  
Real World ◽  
Vehicle Emissions ◽  
Control Strategies ◽  
Driving Cycle ◽  
Specific Power ◽  
Test Cycle ◽  
Light Duty ◽  
And Control ◽  
Light Duty Vehicles

Vehicle emissions standards and regulations remain weak in high-altitude regions. In this study, vehicle emissions from both the New European Driving Cycle and the Worldwide harmonized Light-duty driving Test Cycle were analyzed by employing on-road test data collected from typical roads in a high-altitude city. On-road measurements were conducted on five light-duty vehicles using a portable emissions measurement system. The certification cycle parameters were synthesized from real-world driving data using the vehicle specific power methodology. The analysis revealed that under real-world driving conditions, all emissions were generally higher than the estimated values for both the New European Driving Cycle and Worldwide harmonized Light-duty driving Test Cycle. Concerning emissions standards, more CO, NOx, and hydrocarbons were emitted by China 3 vehicles than by China 4 vehicles, whereas the CO2 emissions exhibited interesting trends with vehicle displacement and emissions standards. These results have potential implications for policymakers in regard to vehicle emissions management and control strategies aimed at emissions reduction, fleet inspection, and maintenance programs.

Sign in / Sign up

Export Citation Format

Share Document