Application fields of kitchen waste biochar and its prospects as catalytic material: A review

2021 ◽  
pp. 152171
Author(s):  
Dayang Yu ◽  
Yan Yu ◽  
Jiawei Tang ◽  
Xiuqing Li ◽  
Chao Ke ◽  
...  
Keyword(s):  
Kitchen Waste ◽  
Catalytic Material ◽  
Application Fields

The First Experience with new Small-Sized Commercial Tem (TEM -100) and Biological Specimens

1990 ◽  
Vol 48 (1) ◽  
pp. 611-611
Author(s):  
Jovan Vukovié
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Liquid Nitrogen ◽  
Boiling Temperature ◽  
Resolution Power ◽  
Application Fields ◽  
Working Liquid

Conventional electron microscope TEM -100 (Made by “ELECTRON”, Sumy, USSR; Fig. 1) was presented at the XI Int. Congress on Electron Microscopy (Kyoto) by I.S. Lyalko et al. (1,2). The purpose of the microscope constructors were to design a small-sized general conventional TEM for various application fields. The microscope have mini lenses, which winding is placed in closed casing and soaked in working liquid (low boiling temperature) but upper part of the casing being water cooled.In this communication we gave our first experience and impression as a customer, beginning from the montage, the instruction and the testing of the microscope to our application in the field of biological specimens. Just after montage of the microscope on the second floor, the test of the point resolution power was performed by Ir specimen. It was achieved 0.5 nm (Fig. 2 and 3) on the roll film (ORWO 22 DIN) with 300 OOOx magnification and anticontamination device. The ultimate vacuum (about 10exp-6 mm Hg, ion discharge pump) also achieved using large trap cooled by liquid nitrogen.

Biogas Plant by Using Kitchen Waste

2017 ◽  
Author(s):  
Sachin Bhujade ◽  
Ajay Mate ◽  
Vikrant Katekar ◽  
Sanjay Sajjanwar
Keyword(s):  
Biogas Plant ◽  
Kitchen Waste

QUALITY ATTRIBUTES OF TOMATO GROWN ORGANICALLY ON KITCHEN WASTE MANURE

2014 ◽  
Author(s):  
S. D. Bhoyar Sunita Borkar S. D. Bhoyar Sunita Borkar ◽  
Keyword(s):  
Quality Attributes ◽  
Kitchen Waste

Nested code sequences of Barker — Mersenne — Raghavarao

2019 ◽  
pp. 71-81
Author(s):  
M. B. Sergeev ◽  
V. A. Nenashev ◽  
A. M. Sergeev
Keyword(s):  
Data Transfer ◽  
Radio Channel ◽  
Main Peak ◽  
Synthesis Methods ◽  
Orthogonal Matrices ◽  
Useful Signal ◽  
New Codes ◽  
Increase In Accuracy ◽  
Application Fields ◽  
Barker Codes

Introduction: The problem of noise-free encoding for an open radio channel is of great importance for data transfer. The results presented in this paper are aimed at stimulating scientific interest in new codes and bases derived from quasi-orthogonal matrices, as a basis for the revision of signal processing algorithms.Purpose: Search for new code sequences as combinations of codes formed from the rows of Mersenne and Raghavarao quasi-orthogonal matrices, as well as complex and more efficient Barker — Mersenne — Raghavarao codes.Results: We studied nested code sequences derived from the rows of quasi-orthogonal cyclic matrices of Mersenne, Raghavarao and Hadamard, providing estimates for the characteristics of the autocorrelation function of nested Barker, Mersenne and Raghavarao codes, and their combinations: in particular, the ratio between the main peak and the maximum positive and negative “side lobes”. We have synthesized new codes, including nested ones, formed on the basis of quasi-orthogonal matrices with better characteristics than the known Barker codes and their nested constructions. The results are significant, as this research influences the establishment and development of methods for isolation, detection and processing of useful information. The results of the work have a long aftermath because new original code synthesis methods need to be studied, modified, generalized and expanded for new application fields.Practical relevance: The practical application of the obtained results guarantees an increase in accuracy of location systems, and detection of a useful signal in noisy background. In particular, these results can be used in radar systems with high distance resolution, when detecting physical objects, including hidden ones.

APPLICATION OF TITANIUM OXIDE COATINGS FOR NEUTRALIZATION OF HAZARDOUS CHEMICAL SUBSTANCES

2019 ◽  
Vol 2 (12) ◽  
pp. 131-136
Author(s):  
О. Halak ◽  
N. Poltorak ◽  
О. Kravchuk ◽  
V. Synko ◽  
Y. Korol
Keyword(s):  
Ultraviolet Rays ◽  
Gaseous Emissions ◽  
Oxide Coatings ◽  
Mobile Objects ◽  
Hazardous Chemical ◽  
Catalytic Material ◽  
Air Purifier ◽  
Domestic Use ◽  
Purification Methods ◽  
Plasma Electrolytic

Contamination of hazardous chemicals is currently considered one of the major environmental problems. The methods of purification of gaseous emissions depending on the physicochemical properties of pollutants, in particular dangerous chemical, their aggregate state, concentration in the gas environment are studied in this article. The effect of aerosol content such as dust and soot is analyzed as well as the efficiency of purification methods at different temperature intervals, methods of purification of multicomponent mixtures. The comparative characteristics of thermochemical, reagent, sorption and catalytic methods are given and the prospects of their application in filtering systems of stationary and mobile objects are evaluated. It has been proved that almost any organic compounds can be oxidized (mineralized) on the TiO2surface. In practice, any photocatalytic air purifier includes a porous TiO2 deposited carrier, which is irradiated with ultraviolet rays and through which air is purged. Photocatalysis is suitable for domestic use as it can occur at room temperature. For example, a thermocatalytic method of destroying harmful substances requires preheating the air to a temperature above 200 ° C. Photocatalysis destroys substances that penetrate even through activated carbon filters. Features of formation of oxide coatings by plasma-electrolytic oxidation of titanium alloys are considered. It is proposed to refine the design of collective defense systems on armored vehicles and stationary facilities with additional installation in the filter-absorber of the grid with the deposited layer of catalytic material, which will neutralize various types of dangerous chemicals due to photocatalytic air purification.

Synthesis of 3,4-Dihydropyrano[c]chromenes Using Carbon Microsphere Supported Copper Nanoparticles (Cu-NP/C) Prepared from Loaded Cation Exchange Resin as a Catalyst

2019 ◽  
Vol 16 (2) ◽  
pp. 288-293
Author(s):  
Yogesh W. More ◽  
Sunil U. Tekale ◽  
Nitishkumar S. Kaminwar ◽  
László Kótai ◽  
Tibor Pasinszki ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Cation Exchange ◽  
Copper Nanoparticles ◽  
Exchange Resin ◽  
Cation Exchange Resin ◽  
Environmentally Benign ◽  
High Yield ◽  
Carbon Microsphere ◽  
Catalytic Material ◽  
Operational Simplicity

Aim and Objective: The present study was performed with the aim to develop an efficient and environmentally benign protocol for the synthesis of biologically siginifcant 3, 4-dihydropyrano[c]chromenes using a new catalytic material. The protocol involves the use of a reusable, environment friendly materials and solvents with operational simplicity. Materials and Methods: Carbon microsphere supported copper nanoparticles (Cu-NP/C) prepared from loaded cation exchange resin were synthesized, characterized with well versed analytical techniques such as XRD, SEM and Raman spectroscopy and the synthesized material was used as a catalyst for the environmentally benign synthesis of 3,4-dihydropyrano[c]chromenes. Results: The formation of carbon microsphere supported copper nanoparticles (Cu-NP/C) prepared from loaded cation exchange resin was confirmed by XRD, SEM and Raman spectroscopy which was employed as a heterogeneous material for the synthesis of 3,4-dihydropyrano[c]chromenes. The products formed were characterized by the analysis of spectroscopic data - NMR, IR and mass. The safe catalytic system offers several advantages including operational simplicity, environmental friendliness, high yield, and reusability of catalyst and green chemical transformation. Conclusion: Herein we report an easy and efficient protocol for the one-pot synthesis of dihydropyrano[ c]chromenes using environmentally benign MCR approach in ethanol as the green solvent. The method developed herein constitutes a valuable addition to the existing methods for the synthesis of titled compounds.

Programmable Integrated Photonics

2020 ◽  
Author(s):  
José Capmany ◽  
Daniel Pérez
Keyword(s):  
Integrated Circuit ◽  
Performance Monitoring ◽  
Low Cost ◽  
Limiting Factors ◽  
External Control ◽  
Integrated Photonics ◽  
New Paradigm ◽  
Photonic Integrated Circuit ◽  
And Performance ◽  
Application Fields

Programmable Integrated Photonics (PIP) is a new paradigm that aims at designing common integrated optical hardware configurations, which by suitable programming can implement a variety of functionalities that, in turn, can be exploited as basic operations in many application fields. Programmability enables by means of external control signals both chip reconfiguration for multifunction operation as well as chip stabilization against non-ideal operation due to fluctuations in environmental conditions and fabrication errors. Programming also allows activating parts of the chip, which are not essential for the implementation of a given functionality but can be of help in reducing noise levels through the diversion of undesired reflections. After some years where the Application Specific Photonic Integrated Circuit (ASPIC) paradigm has completely dominated the field of integrated optics, there is an increasing interest in PIP justified by the surge of a number of emerging applications that are and will be calling for true flexibility, reconfigurability as well as low-cost, compact and low-power consuming devices. This book aims to provide a comprehensive introduction to this emergent field covering aspects that range from the basic aspects of technologies and building photonic component blocks to the design alternatives and principles of complex programmable photonics circuits, their limiting factors, techniques for characterization and performance monitoring/control and their salient applications both in the classical as well as in the quantum information fields. The book concentrates and focuses mainly on the distinctive features of programmable photonics as compared to more traditional ASPIC approaches.

Sign in / Sign up

Export Citation Format

Share Document