The First Experience with new Small-Sized Commercial Tem (TEM -100) and Biological Specimens

1990 ◽  
Vol 48 (1) ◽  
pp. 611-611
Author(s):  
Jovan Vukovié
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Liquid Nitrogen ◽  
Boiling Temperature ◽  
Resolution Power ◽  
Application Fields ◽  
Working Liquid

Conventional electron microscope TEM -100 (Made by “ELECTRON”, Sumy, USSR; Fig. 1) was presented at the XI Int. Congress on Electron Microscopy (Kyoto) by I.S. Lyalko et al. (1,2). The purpose of the microscope constructors were to design a small-sized general conventional TEM for various application fields. The microscope have mini lenses, which winding is placed in closed casing and soaked in working liquid (low boiling temperature) but upper part of the casing being water cooled.In this communication we gave our first experience and impression as a customer, beginning from the montage, the instruction and the testing of the microscope to our application in the field of biological specimens. Just after montage of the microscope on the second floor, the test of the point resolution power was performed by Ir specimen. It was achieved 0.5 nm (Fig. 2 and 3) on the roll film (ORWO 22 DIN) with 300 OOOx magnification and anticontamination device. The ultimate vacuum (about 10exp-6 mm Hg, ion discharge pump) also achieved using large trap cooled by liquid nitrogen.

Immune electron microscopy of haemocyanins from two southern african whelks

1978 ◽  
Vol 36 (2) ◽  
pp. 158-159
Author(s):  
Linda M. Stannard ◽  
Margaret Lennon
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Outer Ring ◽  
Immune Electron Microscopy ◽  
Intertidal Zones ◽  
Central Belt ◽  
Cape Peninsula ◽  
Circular Contour

Burnupena cincta and Fusus verruculatus are two whelks which inhabit the intertidal zones of the Cape Peninsula shore. Their respiratory pigments, or haemocyanins, are morphologically similar in structure (Figs. 1 and 2) and appear in the electron microscope as short cylindrical rods about 34 nm in diameter and 36 nm high. Viewed side-on the molecules show regular banding suggesting a structure composed of six equidistant rings of sub-units. Occasionally the particles have the appearance of possessing a central “belt” in the position of the 3rd and 4th rows of sub-units. End-on views of the haemocyanin molecules show a circular contour with a dense outer ring and a less dense inner ring in which 10 definite sub-units may frequently be distinguished. A number of molecules display an extra central inner component which appears either as a diffuse plug or as a discrete ring-shaped core ± 8 nm in diameter.

Electron microscopy and diffraction studies of polyimides

1983 ◽  
Vol 41 ◽  
pp. 28-29
Author(s):  
O.C. de Hodgins ◽  
K. R. Lawless ◽  
R. Anderson
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Structural Features ◽  
Inert Atmosphere ◽  
Polyimide Films ◽  
Resolution Electron ◽  
The Matrix ◽  
High Resolution Electron Microscope ◽  
Diffraction Patterns ◽  
Polymeric Samples

Commercial polyimide films have shown to be homogeneous on a scale of 5 to 200 nm. The observation of Skybond (SKB) 705 and PI5878 was carried out by using a Philips 400, 120 KeV STEM. The objective was to elucidate the structural features of the polymeric samples. The specimens were spun and cured at stepped temperatures in an inert atmosphere and cooled slowly for eight hours. TEM micrographs showed heterogeneities (or nodular structures) generally on a scale of 100 nm for PI5878 and approximately 40 nm for SKB 705, present in large volume fractions of both specimens. See Figures 1 and 2. It is possible that the nodulus observed may be associated with surface effects and the structure of the polymers be regarded as random amorphous arrays. Diffraction patterns of the matrix and the nodular areas showed different amorphous ring patterns in both materials. The specimens were viewed in both bright and dark fields using a high resolution electron microscope which provided magnifications of 100,000X or more on the photographic plates if desired.

Application of Scanning Electron Microscopy to Medical Research

1969 ◽  
Vol 27 ◽  
pp. 12-13
Author(s):  
J. D. Hutchison
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Medical Research ◽  
Prosthetic Heart Valve ◽  
School Of Medicine ◽  
Transmission Electron ◽  
Definition Of ◽  
Mechanism Of Failure ◽  
The Brain ◽  
Scanning Electron

When the transmission electron microscope was commercially introduced a few years ago, it was heralded as one of the most significant aids to medical research of the century. It continues to occupy that niche; however, the scanning electron microscope is gaining rapidly in relative importance as it fills the gap between conventional optical microscopy and transmission electron microscopy.IBM Boulder is conducting three major programs in cooperation with the Colorado School of Medicine. These are the study of the mechanism of failure of the prosthetic heart valve, the study of the ultrastructure of lung tissue, and the definition of the function of the cilia of the ventricular ependyma of the brain.

Transfer Technique for Electron Microscopy of Membrance Filter Samples

1974 ◽  
Vol 32 ◽  
pp. 554-555
Author(s):  
Lawrence W. Ortiz ◽  
Bonnie L. Isom
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Pore Size ◽  
Membrane Filters ◽  
Size Dependent

A procedure is described for the quantitative transfer of fibers and particulates collected on membrane filters to electron microscope (EM) grids. Various Millipore MF filters (Millipore AA, HA, GS, and VM; 0.8, 0.45, 0.22 and 0.05 μm mean pore size) have been used with success. Observed particle losses have not been size dependent and have not exceeded 10%. With fibers (glass or asbestos) as the collected media this observed loss is approximately 3%.

A Liquid Nitrogen Cooled Stage for STEM

1974 ◽  
Vol 32 ◽  
pp. 444-445
Author(s):  
Louis T. Germinario
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Liquid Nitrogen ◽  
Room Temperature ◽  
Objective Lens ◽  
Thermal Drift ◽  
Specimen Holder ◽  
Resolution Capability ◽  
Focal Position

A liquid nitrogen stage has been developed for the JEOL JEM-100B electron microscope equipped with a scanning attachment. The design is a modification of the standard JEM-100B SEM specimen holder with specimen cooling to any temperatures In the range ~ 55°K to room temperature. Since the specimen plane is maintained at the ‘high resolution’ focal position of the objective lens and ‘bumping’ and thermal drift la minimized by supercooling the liquid nitrogen, the high resolution capability of the microscope is maintained (Fig.4).

Phenomena Associated with Oxygen in Titanium

1967 ◽  
Vol 25 ◽  
pp. 310-311
Author(s):  
E. U. Lee ◽  
P. A. Garner ◽  
J. S. Owens
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Microscope ◽  
Microstructural Changes ◽  
Electrolytic Polishing ◽  
Interstitial Impurities ◽  
Thin Foils ◽  
Transmission Electron ◽  
Iodide Titanium ◽  
Alpha Titanium

Evidence for ordering (1-6) of interstitial impurities (O and C) has been obtained in b.c.c. metals, such as niobium and tantalum. In this paper we report the atomic and microstructural changes in an oxygenated c.p.h. metal (alpha titanium) as observed by transmission electron microscopy and diffraction.Oxygen was introduced into zone-refined iodide titanium sheets of 0.005 in. thickness in an atmosphere of oxygen and argon at 650°C, homogenized at 800°C and furnace-cooled in argon. Subsequently, thin foils were prepared by electrolytic polishing and examined in a JEM-7 electron microscope, operated at 100 KV.

Albumins as Embedding Media for Electron Microscopy

1969 ◽  
Vol 27 ◽  
pp. 422-423 ◽  
Author(s):  
J. L. Farrant ◽  
J. D. McLean
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
High Temperature ◽  
Biological Material ◽  
Globular Proteins ◽  
The Past ◽  
Antibody Staining ◽  
Thin Sectioning ◽  
Embedding Medium

For electron microscope techniques such as ferritin-labeled antibody staining it would be advantageous to have available a simple means of thin sectioning biological material without subjecting it to lipid solvents, impregnation with plastic monomers and their subsequent polymerization. With this aim in view we have re-examined the use of protein as an embedding medium. Gelatin which has been used in the past is not very satisfactory both because of its fibrous nature and the high temperature necessary to keep its solutions fluid. We have found that globular proteins such as the serum and egg albumins can be cross-linked so as to yield blocks which are suitable for ultrathin sectioning.

Development of 200 kV Scanning-Transmission Electron Microscope

1974 ◽  
Vol 32 ◽  
pp. 410-411
Author(s):  
H. Koike ◽  
S. Sakurai ◽  
K. Ueno ◽  
M. Watanabe
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Transmission Electron Microscope ◽  
The Other ◽  
Morphological Observation ◽  
Magnetic Domains ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Backscattered Electron ◽  
Increasing Demand

In recent years, there has been increasing demand for higher voltage SEMs, in the field of surface observation, especially that of magnetic domains, dislocations, and electron channeling patterns by backscattered electron microscopy. On the other hand, the resolution of the CTEM has now reached 1 ∼ 2Å, and several reports have recently been made on the observation of atom images, indicating that the ultimate goal of morphological observation has beem nearly achieved.

The 1-MeV Electron Microscope Installation at the University of Colorado

1973 ◽  
Vol 31 ◽  
pp. 8-9 ◽  
Author(s):  
Mircea Fotino
Keyword(s):  
Electron Microscopy ◽  
Developmental Biology ◽  
Transmission Electron Microscopy ◽  
Electron Microscope ◽  
National Institutes Of Health ◽  
Experimental Program ◽  
University Of Colorado ◽  
Transmission Electron ◽  
The University ◽  
Research Resources

A new 1-MeV transmission electron microscope (Model JEM-1000) was installed at the Department of Molecular, Cellular and Developmental Biology of the University of Colorado in Boulder during the summer and fall of 1972 under the sponsorship of the Division of Research Resources of the National Institutes of Health. The installation was completed in October, 1972. It is installed primarily for the study of biological materials without many of the limitations hitherto unavoidable in standard transmission electron microscopy. Only the technical characteristics of the installation are briefly reviewed here. A more detailed discussion of the experimental program under way is being published elsewhere.

Studies on Leukemogenic and Sarcomagenic Viruses

1970 ◽  
Vol 28 ◽  
pp. 156-157
Author(s):  
Leon Dmochowski
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Morphological Properties ◽  
Mode Of Development ◽  
Relationship Of ◽  
The Relationship

Electron microscopy has proved to be an invaluable discipline in studies on the relationship of viruses to the origin of leukemia, sarcoma, and other types of tumors in animals and man. The successful cell-free transmission of leukemia and sarcoma in mice, rats, hamsters, and cats, interpreted as due to a virus or viruses, was proved to be due to a virus on the basis of electron microscope studies. These studies demonstrated that all the types of neoplasia in animals of the species examined are produced by a virus of certain characteristic morphological properties similar, if not identical, in the mode of development in all types of neoplasia in animals, as shown in Fig. 1.

Sign in / Sign up

Export Citation Format

Share Document