Proposal of preliminary device model and scaling scheme of cross-current tetrode SOI MOSFET aiming at low-energy circuit applications

2011 ◽  
Vol 64 (1) ◽  
pp. 18-27 ◽  
Author(s):  
Yasuhisa Omura ◽  
Azuma Yu ◽  
Yoshimasa Yoshioka ◽  
Kyota Fukuchi ◽  
Daishi Ino
2019 ◽  
Vol 35 (5) ◽  
pp. 85-90 ◽  
Author(s):  
Y. Omura ◽  
Kyota Fukuchi ◽  
Daishi Ino ◽  
Osanori Hayashi

Author(s):  
Yu Azuma ◽  
Yoshimasa Yoshioka ◽  
Yasuhisa Omura
Keyword(s):  

1996 ◽  
Vol 43 (11) ◽  
pp. 1914-1923 ◽  
Author(s):  
S.R. Banna ◽  
P.C.H. Chan ◽  
M. Chan ◽  
P.K. Ko

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
M. Narayanan ◽  
H. Al-Nashash ◽  
Baquer Mazhari ◽  
Dipankar Pal ◽  
Mahesh Chandra

This paper presents a complete analysis of the kink effect in SOI MOSFET and proposes a method for eliminating kink effect observed in the current-voltage output characteristics of a partially depleted SOI MOSFET device. In this method, back oxide for the device is introduced at selected regions below the source and drain and not continuously as in an SOI device giving rise to what is termed a “SELBOX” structure. Selective back oxide structure with different gap lengths and thicknesses was studied. Results obtained through numerical simulations indicate that the proposed structure can significantly reduce the kink while still preserving major advantages offered by conventional SOI structure. Although the new structure is capable of eliminating kink, for narrow gaps the device may still exhibit some kink effect. A device model that explains the kink behavior of the structure for varying gap lengths is also developed.


Author(s):  
A. Garg ◽  
W.A.T. Clark ◽  
J.P. Hirth

In the last twenty years, a significant amount of work has been done in the theoretical understanding of grain boundaries. The various proposed grain boundary models suggest the existence of coincidence site lattice (CSL) boundaries at specific misorientations where a periodic structure representing a local minimum of energy exists between the two crystals. In general, the boundary energy depends not only upon the density of CSL sites but also upon the boundary plane, so that different facets of the same boundary have different energy. Here we describe TEM observations of the dissociation of a Σ=27 boundary in silicon in order to reduce its surface energy and attain a low energy configuration.The boundary was identified as near CSL Σ=27 {255} having a misorientation of (38.7±0.2)°/[011] by standard Kikuchi pattern, electron diffraction and trace analysis techniques. Although the boundary appeared planar, in the TEM it was found to be dissociated in some regions into a Σ=3 {111} and a Σ=9 {122} boundary, as shown in Fig. 1.


Sign in / Sign up

Export Citation Format

Share Document