Processing parameters to enhance the electrical conductivity and thermoelectric power factor of polypyrrole/multi-walled carbon nanotubes nanocomposites

2019 ◽  
Vol 247 ◽  
pp. 59-66 ◽  
Author(s):  
Mohammadmehdi Aghelinejad ◽  
Yichun Zhang ◽  
Siu N. Leung
2018 ◽  
Vol 9 (1) ◽  
pp. 37 ◽  
Author(s):  
Luiz Ecco ◽  
Sithiprumnea Dul ◽  
Débora Schmitz ◽  
Guilherme Barra ◽  
Bluma Soares ◽  
...  

Acrylonitrile–butadiene–styrene (ABS) filled with 6 wt.% of multi-walled carbon nanotubes and graphene nanoplatelets was extruded in filaments and additively manufactured via fused deposition modeling (FDM). The electrical conductivity and electromagnetic interference shielding efficiency (EMI SE) in the frequency range between 8.2 and 12.4 GHz of the resulting 3D samples were assessed. For comparison purposes, compression molded samples of the same composition were investigated. Electrical conductivity of about 10−4 S·cm−1 and attenuations of the incident EM wave near 99.9% were achieved for the 3D components loaded with multi-walled carbon nanotubes, almost similar to the correspondent compression molded samples. Transmission electron microscopy (TEM) images of ABS composite filaments show that graphene nanoplatelets were oriented along the polymer flow whereas multi-walled carbon nanotubes were randomly distributed after the extrusion process. The electrical conductivity and electromagnetic interference (EMI) shielding properties of compression molded and FDM manufactured samples were compared and discussed in terms of type of fillers and processing parameters adopted in the FDM process, such as building directions and printing patterns. In view of the experimental findings, the role of the FDM processing parameters were found to play a major role in the development of components with enhanced EMI shielding efficiency.


Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1150
Author(s):  
Nicolás A. Ulloa-Castillo ◽  
Roberto Hernández-Maya ◽  
Jorge Islas-Urbano ◽  
Oscar Martínez-Romero ◽  
Emmanuel Segura-Cárdenas ◽  
...  

This article focuses on exploring how the electrical conductivity and densification properties of metallic samples made from aluminum (Al) powders reinforced with 0.5 wt % concentration of multi-walled carbon nanotubes (MWCNTs) and consolidated through spark plasma sintering (SPS) process are affected by the carbon nanotubes dispersion and the Al particles morphology. Experimental characterization tests performed by scanning electron microscopy (SEM) and by energy dispersive spectroscopy (EDS) show that the MWCNTs were uniformly ball-milled and dispersed in the Al surface particles, and undesirable phases were not observed in X-ray diffraction measurements. Furthermore, high densification parts and an improvement of about 40% in the electrical conductivity values were confirmed via experimental tests performed on the produced sintered samples. These results elucidate that modifying the powder morphology using the ball-milling technique to bond carbon nanotubes into the Al surface particles aids the ability to obtain highly dense parts with increasing electrical conductivity properties.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Natsumi Komatsu ◽  
Yota Ichinose ◽  
Oliver S. Dewey ◽  
Lauren W. Taylor ◽  
Mitchell A. Trafford ◽  
...  

AbstractLow-dimensional materials have recently attracted much interest as thermoelectric materials because of their charge carrier confinement leading to thermoelectric performance enhancement. Carbon nanotubes are promising candidates because of their one-dimensionality in addition to their unique advantages such as flexibility and light weight. However, preserving the large power factor of individual carbon nanotubes in macroscopic assemblies has been challenging, primarily due to poor sample morphology and a lack of proper Fermi energy tuning. Here, we report an ultrahigh value of power factor (14 ± 5 mW m−1 K−2) for macroscopic weavable fibers of aligned carbon nanotubes with ultrahigh electrical and thermal conductivity. The observed giant power factor originates from the ultrahigh electrical conductivity achieved through excellent sample morphology, combined with an enhanced Seebeck coefficient through Fermi energy tuning. We fabricate a textile thermoelectric generator based on these carbon nanotube fibers, which demonstrates high thermoelectric performance, weavability, and scalability. The giant power factor we observe make these fibers strong candidates for the emerging field of thermoelectric active cooling, which requires a large thermoelectric power factor and a large thermal conductivity at the same time.


2019 ◽  
Author(s):  
Abeer O. Obeid ◽  
Fatma Al-Yusufy ◽  
Sama A Al-Aghbari ◽  
omar alshujaa ◽  
Yassin Gaber ◽  
...  

<p>The chemical functionalization of amino multi-walled carbon nanotubes (MWCNT-NH<sub>2</sub>) by selenium dioxide (SeO<sub>2</sub>) was used to produce Poly [MWCNT/Imidoselenium] composite. The prepared poly-composite was characterized by FTIR, SEM, TEM, XRD, UV, DSC and TGA. The DC electrical conductivity of poly-composite was 4.3×10<sup>-4</sup> S/cm due to the interaction between the nanotubes. </p>


2018 ◽  
Vol 6 (14) ◽  
pp. 5627-5634 ◽  
Author(s):  
Hyun Ju ◽  
Dabin Park ◽  
Jooheon Kim

Flexible thermoelectric composite films with a high thermoelectric power factor are achieved via a solution processing procedure.


RSC Advances ◽  
2018 ◽  
Vol 8 (3) ◽  
pp. 1593-1599 ◽  
Author(s):  
Jonna Hynynen ◽  
David Kiefer ◽  
Christian Müller

The crystallinity of P3HT strongly benefits the electrical conductivity but not Seebeck coefficient, leading to an increase in power factor by one order of magnitude.


2008 ◽  
Vol 10 (S1) ◽  
pp. 77-88 ◽  
Author(s):  
Cher Hon Lau ◽  
Raoul Cervini ◽  
Stephen R. Clarke ◽  
Milena Ginic Markovic ◽  
Janis G. Matisons ◽  
...  

2012 ◽  
Vol 622-623 ◽  
pp. 781-786
Author(s):  
Sarojini Swain ◽  
Subhendu Bhattacharya ◽  
Ram Avatar Sharma ◽  
Lokesh Chaudhari

Hydroxyl modified multi-walled carbon nanotubes (OH-MWCNT)/ polyurethane (PU) and graphene nanosheets (GNS)/PU composites were prepared by dispersing the OH-MWCNT and GNS at different wt % in to the PU matrix. It was found that the electrical percolation threshold of the GNS/PU composite is much higher compared to that of OH-MWCNT/PU and also the electrical conductivity of the OH-MWCNT/PU composite is higher than the GNS/PU composite in the same level of filler content. This may be due to the two composites having different electrical conduction mechanisms: The OH-MWCNT/PU composite represents a three dimensional conduction system while, the GNS/PU composite represents a two dimensional conduction system. The improvement in the electrical conductivity with the incorporation of GNS as a filler in the composite is far lower than what theoretically expected. It is also observed that the tensile strength of the OH-MWCNT/PU composite is higher compared to the GNS/PU in the same level filler content.


Sign in / Sign up

Export Citation Format

Share Document