scholarly journals Use of recycled rubber inclusions with granular waste for enhanced track performance

2021 ◽  
Vol 6 ◽  
pp. 100093
Author(s):  
Buddhima Indraratna ◽  
Yujie Qi ◽  
Chamindi Jayasuriya ◽  
Cholachat Rujikiatkamjorn ◽  
Chathuri M.K. Arachchige
Keyword(s):  
2021 ◽  
Vol 11 (6) ◽  
pp. 2725
Author(s):  
Jakub Svoboda ◽  
Tomáš Dvorský ◽  
Vojtěch Václavík ◽  
Jakub Charvát ◽  
Kateřina Máčalová ◽  
...  

This article describes an experimental study aimed at investigating the potential use of recycled rubber granulate from waste tires of fractions 0/1 and 1/3 mm in cement composites as a 100% replacement for natural aggregates. The use of waste in the development and production of new building materials represents an important aspect for the sustainability and protection of the environment. This article is focused on the sound-absorbing and thermal-insulating properties of experimental cement composites based on recycled rubber from waste tires. The article describes the grain characteristics of recycled rubber, sound absorption capacity, thermal conductivity and strength characteristics. The results of this research show that the total replacement of natural aggregate with recycled rubber in cement composites is possible. Replacing natural aggregate with recycled rubber has significantly improved the thermal and acoustic properties of the prepared cement composites, however, at the same time; there was also the expected decrease in the strength characteristics due to the elasticity of rubber.


2012 ◽  
Vol 85 (3) ◽  
pp. 408-449 ◽  
Author(s):  
Marvin Myhre ◽  
Sitisaiyidah Saiwari ◽  
Wilma Dierkes ◽  
Jacques Noordermeer

ABSTRACT For both environmental and economic reasons, there is broad interest in recycling rubber and in the continued development of recycling technologies. The use of postindustrial materials is a fairly well-established and documented business. Much effort over the past decade has been put into dealing with of end-of-life tires from landfills and vacant fields. It is only in the last few years that more business opportunities for recycled rubber have come to the forefront. Reclaiming rubber has gained increasing interest, more so in Europe than in North America. In those areas, much work has been done to refine the processes used. The major form of recycled rubber is still ground rubber. This is produced either by cryogenic, ambient, or wet grinding. The material is then used neat with sulfur/curatives, binders, or cements. The binders are normally moisture curable urethanes, liquid polybutadienes, or latex to produce items such as mats, floor tiles, and carpet undercushion. Recycled rubber is still used as tire derived fuel, but less so than 10 years ago. Another outlet is as an additive to asphalt. Recycled rubber can be used in the plastics industry, for which much development is being done. Large particle size ground rubber or chips are used in civil engineering applications, landscaping, or artificial turf. In terms of applications, most use is outside of the conventional rubber industry. Cost factors are still addressed in the tire industry. As of 2012, approximately 8–10% recycled material is used in tires. The biggest obstacles to further adaption are safety factors and property loss. Better methods are needed for treating or modifying the rubber surface and for regenerating the rubber through devulcanization. Devulcanization gives the highest quality recycled material in terms of processing and properties. However, shortcomings to devulcanization are reduced process safety and odorous chemicals that are required at present.


2021 ◽  
pp. 128230
Author(s):  
Sachinthani Karunarathna ◽  
Steven Linforth ◽  
Alireza Kashani ◽  
Xuemei Liu ◽  
Tuan Ngo

INCREaSE 2019 ◽  
2019 ◽  
pp. 981-988
Author(s):  
Beatriz Marques ◽  
António Tadeu ◽  
João Almeida ◽  
Sara Dias ◽  
Filipe Pedro

Sign in / Sign up

Export Citation Format

Share Document