Optimization of preparation conditions for activated carbon from banana pseudo-stem using response surface methodology on removal of color and COD from landfill leachate

2017 ◽  
Vol 62 ◽  
pp. 177-187 ◽  
Author(s):  
Zaidi Ab Ghani ◽  
Mohd Suffian Yusoff ◽  
Nastaein Qamaruz Zaman ◽  
Mohd Faiz Muaz Ahmad Zamri ◽  
Jeyashelly Andas
2013 ◽  
Vol 860-863 ◽  
pp. 527-533
Author(s):  
Zhen Wu ◽  
Yong Sun ◽  
Lei Hu ◽  
Ning Xu ◽  
Ben Lin Dai

Utilization of wheat straw for bio-based chemicals production is a research focus. In this work, experiments were conducted to study the preparation conditions of activated carbon from formic acid hydrolysis residue of wheat straw applying response surface methodology. The effects of activation reaction temperature, retention time and activator quantity on the decolorizing capacity of activated carbon were dealt with in this paper. Optimal preparation conditions were abtained by response surface methodology as followed: the content of ZnCl2 solution was 14.2%, reaction temperature was 798°C and retained time was 30 mins with a decolorizing capacity of 15.8 mL methylene blue. Results indicated that the technology was available.


2016 ◽  
Vol 14 (5) ◽  
pp. 991-1001 ◽  
Author(s):  
Areeb Shehzad ◽  
Mohammed J.K. Bashir ◽  
Sumathi Sethupathi ◽  
Jun-Wei Lim

Abstract The present work reveals the preparation and optimization of sea mango based activated carbon (SMAC) by microwave induced KOH activation for the adsorptive removal of organic and inorganic contaminants from the mature anaerobic landfill leachate using response surface methodology (RSM) technique. Chemical oxygen demand (COD) and ammoniacal nitrogen (NH3-N) are the main indicators for organic and inorganic compounds often found in aged landfill leachate. Hence, the treatment of this stabilized landfill leachate is considered to be an essential step prior to its discharge. The leachate sample was collected from Sahom Landfill site in Perak, Malaysia and the initial concentrations of COD and NH3-N were measured as 550 mg/L and 3,330 mg/L, respectively. The feasibility of converting Sea mango to activated carbon process to remove the COD and NH3-N pollutants from landfill leachate was investigated. The preparation conditions such as microwave heating at power range (350–600 W), impregnation of AC with KOH (0.5–3.0) and retention time (6–10 min) were evaluated, analyzed and optimized using response surface methodology (RSM). From the analysis of variance (ANOVA), the optimum conditions for preparation of SMAC was at 560 W of activation power, 8.4 min of activation time and 2.10 of impregnation ratios with higher adsorptive removal of COD (72.50 %), and NH3-N (79.77 %), respectively. The physical and chemical properties of SMAC were evaluated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and surface area. The findings exemplified the applicability of SMAC as an effective precursor for the simultaneous removal of organic and inorganic pollutants from mature landfill leachate.


Author(s):  
Chenglin Liu ◽  
Linlin Liang ◽  
Xiuli Han ◽  
Chun Chang ◽  
Junying Chen ◽  
...  

Abstract Furfural residue (FR), a solid waste, was applied as the precursor to prepare activated carbon by steam activation. The Box-Behnken design (BBD) approach-based response surface methodology (RSM) was utilized to optimize the preparation conditions to evaluate their effects on the performance of activated carbon from furfural residue (FRAC). The optimum preparation conditions of FRAC were found as follows: activation temperature of 922 °C, activation time of 62 min, and the mass ratio of char to H2O of 1:4.5, resulting in 1,501.84 mg/g of iodine adsorption capacity and 1,662.41 m2/g of specific surface area. The FRAC was characterized and then the adsorption performance of BPS on FRAC was investigated. Langmuir and Koble-Corrigan isotherm models were well fitted to the experimental data, and the adsorption kinetics process was perfectly described by the pseudo-second-order model. Thermodynamic parameters showed that the adsorption of BPS was a spontaneous exothermic process. Besides, the regeneration efficiency of FRAC was over 97% after five consecutive cycles. The maximum monolayer adsorption capacity of FRAC for BPS was 3.2848 mmol/g at 298 K, indicating that the FRAC was an excellent adsorbent for the removal of BPS from aqueous solutions.


Author(s):  
Abrar Muslim ◽  
Marwan Marwan ◽  
Ramli Saifullah ◽  
Muhammad Yahya Azwar ◽  
Darmadi Darmadi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document