Effect of torrefaction conditions on the physicochemical characterization of agricultural waste (sugarcane bagasse)

2019 ◽  
Vol 88 ◽  
pp. 280-290 ◽  
Author(s):  
Sumaira Kanwal ◽  
Nawaz Chaudhry ◽  
Shahid Munir ◽  
Hafiza Sana
2018 ◽  
Vol 1145 ◽  
pp. 44-48 ◽  
Author(s):  
Chanchira Channoy ◽  
Somchai Maneewan ◽  
Chantana Punlek ◽  
Surapong Chirarattananon

Sugarcane bagasse is an agricultural waste that is potentially used as natural silica resources. Natural silica claimed to be safe in handing, cheap and can be generate from cheap resource. In the objectives of this study were to prepared silica from Sugarcane bagasse. The preparation of Sugarcane bagasse ash by burning at 700 °C for 4 and 6 h, respectively in atmosphere. The result of X-ray florescent: XRF, silica content which was obtained after heat treatment at 700 °C for 6 h was 80.814 wt%. Bagasse ash was purified by alkaline extraction method with 1.5, 2 and 2.5 N sodium hydroxide (NaOH), respectively. And refluxed by using concentrated 2 N sulfuric acid. From X-ray diffraction pattern showed that the obtained products were amorphous silica, 2.5 N sodium hydroxide. The morphology was observed by SEM, sphere and average particles dimension of synthesis silica with 1.5, 2 and 2.5 N NaOH are 120, 100 and 80 nm respectively. The SEM micrographs showed that the Concentration of NaOH was increased, the particles dimension decreased


2020 ◽  
Vol 26 (4) ◽  
pp. 200250-0
Author(s):  
Abdul Rahman Abdul Rahim ◽  
Iswarya ◽  
Khairiraihanna Johari ◽  
Nasir Shehzad ◽  
Norasikin Saman ◽  
...  

Desiccated coconut waste (DCW) is an agricultural waste that originates from the coconut milk processing industry. In this study, it was utilized for the removal of copper (Cu(II)) and nickel (Ni(II)) via adsorption process. The physicochemical characterization of the DCW adsorbent shows that the adsorbent have a surface area of 6.63 m<sup>2</sup>/g, have high elemental carbon content and existences of important functional groups on its surface. The adsorptive capability of DCW adsorbent in removing the heavy metal were conducted in batch studies. DCW adsorbent performed highest Ni(II) and Cu(II) adsorption capacity at pH 6, where equilibrium is achieved at 450 minutes. The kinetic analysis showed the adsorption agreed with pseudo-second order kinetic model, indicating the Cu(II) and Ni(II) adsorption were a chemical adsorption, limited by the film diffusion. The DCW adsorbent still retained its effective adsorption capacity after 2 adsorption-desorption cycles, which is one of the excellent criteria of a good adsorbent for an adsorption process.


2016 ◽  
Vol 94 ◽  
pp. 463-470 ◽  
Author(s):  
Fabrícia Farias de Menezes ◽  
Renan Henrique da Silva Fernandes ◽  
George Jackson de Moraes Rocha ◽  
Rubens Maciel Filho

2019 ◽  
Vol 38 (2) ◽  
pp. 385 ◽  
Author(s):  
Marwa M. El-Naggar ◽  
Wael S. I. Abou-Elmagd ◽  
Ashraf Suloma ◽  
Hamza A. El-Shabaka ◽  
Magdy T. Khalil ◽  
...  

Author(s):  
Kumar P ◽  
S Kumar ◽  
A Kumar ◽  
M Chander

The purpose of this study was to prepare and characterize solid dispersions of the antibacterial agent Cefdinir with PEG 4000 and PVP K-30 with a view to improve its dissolution properties. Investigations of the properties of the dispersions were performed using release studies, X-ray powder diffraction (XRD) and Fourier transform infrared (FTIR). The results obtained showed that the rate of dissolution of Cefdinir was considerably improved when formulated in solid dispersions with PVP K-30 and PEG 4000 as compared with pure drug and physical mixtures. The results from XRD studies showed the transition of crystalline nature of drug to amorphous form, while FTIR studies demonstrated the absence of drug-carriers interaction.


2013 ◽  
Vol 21 (2) ◽  
pp. 108-114 ◽  
Author(s):  
Girijesh Patel ◽  
Amit Gupta ◽  
Akshita Gupta ◽  
Manisha Mishra ◽  
Pradhyumna Singh ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document