A linearized discrete ordinate radiative transfer model for atmospheric remote-sensing retrieval

2001 ◽  
Vol 68 (6) ◽  
pp. 689-735 ◽  
Author(s):  
R.J.D. Spurr ◽  
T.P. Kurosu ◽  
K.V. Chance
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Discrete Ordinate ◽  
Atmospheric Remote Sensing

scholarly journals Error simulations of uncorrected NDVI and DCVI during remote sensing measurements from UAS

2014 ◽  
Vol 18 (2) ◽  
pp. 35-45 ◽  
Author(s):  
Michał T. Chiliński ◽  
Marek Ostrowski
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Vegetation Index ◽  
Vegetation Mapping ◽  
Radiative Transfer Model ◽  
Unmanned Aerial Systems ◽  
Transfer Model ◽  
Digital Cameras ◽  
Aerial Systems

Abstract Remote sensing from unmanned aerial systems (UAS) has been gaining popularity in the last few years. In the field of vegetation mapping, digital cameras converted to calculate vegetation index (DCVI) are one of the most popular sensors. This paper presents simulations using a radiative transfer model (libRadtran) of DCVI and NDVI results in an environment of possible UAS flight scenarios. The analysis of the results is focused on the comparison of atmosphere influence on both indices. The results revealed uncertainties in uncorrected DCVI measurements up to 25% at the altitude of 5 km, 5% at 1 km and around 1% at 0.15 km, which suggests that DCVI can be widely used on small UAS operating below 0.2 km.

scholarly journals Effect of OH emission on the temperature and wind measurements derived from limb-viewing observations of the 1.27 µm O<sub>2</sub> dayglow

2020 ◽  
Vol 13 (4) ◽  
pp. 1817-1824
Author(s):  
Kuijun Wu ◽  
Weiwei He ◽  
Yutao Feng ◽  
Yuanhui Xiong ◽  
Faquan Li
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Spectral Region ◽  
Emission Lines ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Altitude Range ◽  
Band Emission ◽  
Near Space ◽  
Wind Measurements

Abstract. The O2(a1Δg) emission near 1.27 µm is well-suited for remote sensing of global wind and temperature in near-space by limb-viewing observations to its bright signal and extended altitude coverage. However, vibrational–rotational emission lines of the OH dayglow produced by the hydrogen–ozone reaction (H+O3→OH•+O2) overlap the infrared atmospheric band emission (a1Δg→X3Σg) of O2. The main goal of this paper is to discuss the effect of OH emission on the wind and temperature measurements derived from the 1.27 µm O2 dayglow limb-viewing observations. The O2 dayglow and OH dayglow spectrum over the spectral region and altitude range of interest is calculated by using the line-by-line radiative transfer model and the most recent photochemical model. The method of four-point sampling of the interferogram and sample results of measurement simulations are provided for both O2 dayglow and OH dayglow. It is apparent from the simulations that the presence of OH dayglow as an interfering species decreases the wind and temperature accuracy at all altitudes, but this effect can be reduced considerably by improving OH dayglow knowledge.

scholarly journals Improvement of the Simulation of Cloud Longwave Scattering in Broadband Radiative Transfer Models

2018 ◽  
Vol 75 (7) ◽  
pp. 2217-2233 ◽  
Author(s):  
Guanglin Tang ◽  
Ping Yang ◽  
George W. Kattawar ◽  
Xianglei Huang ◽  
Eli J. Mlawer ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Multiple Scattering ◽  
General Circulation ◽  
General Circulation Models ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Discrete Ordinate ◽  
Wide Range ◽  
Scaling Methods ◽  
Computational Errors

Abstract Cloud longwave scattering is generally neglected in general circulation models (GCMs), but it plays a significant and highly uncertain role in the atmospheric energy budget as demonstrated in recent studies. To reduce the errors caused by neglecting cloud longwave scattering, two new radiance adjustment methods are developed that retain the computational efficiency of broadband radiative transfer simulations. In particular, two existing scaling methods and the two new adjustment methods are implemented in the Rapid Radiative Transfer Model (RRTM). The results are then compared with those based on the Discrete Ordinate Radiative Transfer model (DISORT) that explicitly accounts for multiple scattering by clouds. The two scaling methods are shown to improve the accuracy of radiative transfer simulations for optically thin clouds but not effectively for optically thick clouds. However, the adjustment methods reduce computational errors over a wide range, from optically thin to thick clouds. With the adjustment methods, the errors resulting from neglecting cloud longwave scattering are reduced to less than 2 W m−2 for the upward irradiance at the top of the atmosphere and less than 0.5 W m−2 for the surface downward irradiance. The adjustment schemes prove to be more accurate and efficient than a four-stream approximation that explicitly accounts for multiple scattering. The neglect of cloud longwave scattering results in an underestimate of the surface downward irradiance (cooling effect), but the errors are almost eliminated by the adjustment methods (warming effect).

scholarly journals Analysis of Sentinel-2 and RapidEye for Retrieval of Leaf Area Index in a Saltmarsh Using a Radiative Transfer Model

2019 ◽  
Vol 11 (6) ◽  
pp. 671 ◽  
Author(s):  
Roshanak Darvishzadeh ◽  
Tiejun Wang ◽  
Andrew Skidmore ◽  
Anton Vrieling ◽  
Brian O’Connor ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Leaf Area Index ◽  
Plant Traits ◽  
Remote Sensing Data ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Area Index ◽  
Field Campaigns ◽  
Sentinel 2

The Sentinel satellite fleet of the Copernicus Programme offers new potential to map and monitor plant traits at fine spatial and temporal resolutions. Among these traits, leaf area index (LAI) is a crucial indicator of vegetation growth and an essential variable in biodiversity studies. Numerous studies have shown that the radiative transfer approach has been a successful method to retrieve LAI from remote-sensing data. However, the suitability and adaptability of this approach largely depend on the type of remote-sensing data, vegetation cover and the ecosystem studied. Saltmarshes are important wetland ecosystems threatened by sea level rise among other human- and animal-induced changes. Therefore, monitoring their vegetation status is crucial for their conservation, yet few LAI assessments exist for these ecosystems. In this study, the retrieval of LAI in a saltmarsh ecosystem is examined using Sentinel-2 and RapidEye data through inversion of the PROSAIL radiative transfer model. Field measurements of LAI and some other plant traits were obtained during two succeeding field campaigns in July 2015 and 2016 on the saltmarsh of Schiermonnikoog, a barrier island of the Netherlands. RapidEye (2015) and Sentinel-2 (2016) data were acquired concurrent to the time of the field campaigns. The broadly employed PROSAIL model was inverted using two look-up tables (LUTs) generated in the spectral band’s settings of the two sensors and in which each contained 500,000 records. Different solutions from the LUTs, as well as, different Sentinel-2 spectral subsets were considered to examine the LAI retrieval. Our results showed that generally the LAI retrieved from Sentinel-2 had higher accuracy compared to RapidEye-retrieved LAI. Utilising the mean of the first 10 best solutions from the LUTs resulted in higher R2 (0.51 and 0.59) and lower normalised root means square error (NRMSE) (0.24 and 0.16) for both RapidEye and Sentinel-2 data respectively. Among different Sentinel-2 spectral subsets, the one comprised of the four near-infrared (NIR) and shortwave infrared (SWIR) spectral bands resulted in higher estimation accuracy (R2 = 0.44, NRMSE = 0.21) in comparison to using other studied spectral subsets. The results demonstrated the feasibility of broadband multispectral sensors, particularly Sentinel-2 for retrieval of LAI in the saltmarsh ecosystem via inversion of PROSAIL. Our results highlight the importance of proper parameterisation of radiative transfer models and capacity of Sentinel-2 spectral range and resolution, with impending high-quality global observation aptitude, for retrieval of plant traits at a global scale.

scholarly journals Radiometric Microwave Indices for Remote Sensing of Land Surfaces

2018 ◽  
Vol 10 (12) ◽  
pp. 1859 ◽  
Author(s):  
Simonetta Paloscia ◽  
Paolo Pampaloni ◽  
Emanuele Santi
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Snow Water Equivalent ◽  
Hydrological Cycle ◽  
Microwave Remote Sensing ◽  
Dense Medium ◽  
Single Frequency ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Land Surfaces

This work presents an overview of the potential of microwave indices obtained from multi-frequency/polarization radiometry in detecting the characteristics of land surfaces, in particular soil covered by vegetation or snow and agricultural bare soils. Experimental results obtained with ground-based radiometers on different types of natural surfaces by the Microwave Remote Sensing Group of IFAC-CNR starting from ‘80s, are summarized and interpreted by means of theoretical models. It has been pointed out that, with respect to single frequency/polarization observations, microwave indices revealed a higher sensitivity to some significant parameters, which characterize the hydrological cycle, namely: soil moisture, vegetation biomass and snow depth or snow water equivalent. Electromagnetic models have then been used for simulating brightness temperature and microwave indices from land surfaces. As per vegetation covered soils, the well-known tau-omega (τ-ω) model based on the radiative transfer theory has been used, whereas terrestrial snow cover has been simulated using a multi-layer dense-medium radiative transfer model (DMRT). On the basis of these results, operational inversion algorithms for the retrieval of those hydrological quantities have been successfully implemented using multi-channel data from the microwave radiometric sensors operating from satellite.

SHDOMPPDA: A Radiative Transfer Model for Cloudy Sky Data Assimilation

2007 ◽  
Vol 64 (11) ◽  
pp. 3854-3864 ◽  
Author(s):  
K. Franklin Evans
Keyword(s):  
Radiative Transfer ◽  
Data Assimilation ◽  
Spherical Harmonics ◽  
Forward Model ◽  
Radiative Transfer Model ◽  
Computational Time ◽  
Transfer Model ◽  
Discrete Ordinate Method ◽  
Discrete Ordinate ◽  
Plane Parallel

Abstract The spherical harmonics discrete ordinate method for plane-parallel data assimilation (SHDOMPPDA) model is an unpolarized plane-parallel radiative transfer forward model, with corresponding tangent linear and adjoint models, suitable for use in assimilating cloudy sky visible and infrared radiances. It is derived from the spherical harmonics discrete ordinate method plane-parallel (SHDOMPP, also described in this article) version of the spherical harmonics discrete ordinate method (SHDOM) model for three-dimensional atmospheric radiative transfer. The inputs to the SHDOMPPDA forward model are profiles of pressure, temperature, water vapor, and mass mixing ratio and number concentration for a number of hydrometeor species. Hydrometeor optical properties, including detailed phase functions, are determined from lookup tables as a function of mass mean radius. The SHDOMPP and SHDOMPPDA algorithms and construction of the tangent-linear and adjoint models are described. The SHDOMPPDA forward model is validated against the Discrete Ordinate Radiative Transfer Model (DISORT) by comparing upwelling radiances in multiple directions from 100 cloud model columns at visible and midinfrared wavelengths. For this test in optically thick clouds the computational time for SHDOMPPDA is comparable to DISORT for visible reflection, and roughly 5 times faster for thermal emission. The tangent linear and adjoint models are validated by comparison to finite differencing of the forward model.

scholarly journals Modelling of underwater light fields in turbid and eutrophic waters: application and validation with experimental data

Ocean Science ◽  
2015 ◽  
Vol 11 (1) ◽  
pp. 33-52 ◽  
Author(s):  
B. Sundarabalan ◽  
P. Shanmugam
Keyword(s):  
Remote Sensing ◽  
Radiative Transfer ◽  
Water Column ◽  
Radiative Transfer Model ◽  
Light Fields ◽  
Transfer Model ◽  
Inhomogeneous Layer ◽  
Layer By Layer ◽  
Direct Part ◽  
Underwater Light

Abstract. A reliable radiative transfer (RT) model is an essential and indispensable tool for understanding the radiative transfer processes in homogenous and layered waters, analyzing measurements made by radiance sensors and developing remote-sensing algorithms to derive meaningful physical quantities and biogeochemical variables in turbid and productive coastal waters. Existing radiative transfer models have been designed to be applicable to either homogenous waters or inhomogeneous waters. To overcome such constraints associated with these models, this study presents a radiative transfer model that treats a homogenous layer as a diffuse part and an inhomogeneous layer as a direct part in the water column and combines these two parts appropriately in order to generate more reliable underwater light-field data such as upwelling radiance (Lu), downwelling irradiance (Ed) and upwelling irradiance (Eu). The diffuse model assumes the inherent optical properties (IOPs) to be vertically continuous and the light fields to exponentially decrease with depth, whereas the direct part considers the water column to be vertically inhomogeneous (layer-by-layer phenomena) with the vertically varying phase function. The surface and bottom boundary conditions, source function due to chlorophyll and solar incident geometry are also included in the present RT model. The performance of this model is assessed in a variety of waters (clear, turbid and eutrophic) using the measured radiometric data. The present model shows an advantage in terms of producing accurate Lu, Ed and Eu profiles (in spatial domain) in different waters determined by both homogenous and inhomogeneous conditions. The feasibility of predicting these underwater light fields based on the remotely estimated IOP data is also examined using the present RT model. For this application, vertical profiles of the water constituents and IOPs are estimated by empirical models based on our in situ data. The present RT model generates Lu, Ed and Eu spectra closely consistent with the measured data. These results lead to a conclusion that the present RT model is a viable alternative to existing RT models and has an important implication for remote sensing of optically complex waters.

Sign in / Sign up

Export Citation Format

Share Document