Some studies on static analysis of composite thin-walled box beam

1997 ◽  
Vol 62 (4) ◽  
pp. 625-634 ◽  
Author(s):  
R. Suresh ◽  
S.K. Malhotra
Keyword(s):  
Static Analysis ◽  
Box Beam ◽  
Thin Walled

Experimental and Numerical Investigation of Critical Buckle Load of Composite Specimens

2015 ◽  
Vol 732 ◽  
pp. 85-90
Author(s):  
Lukáš Bek ◽  
Radek Kottner ◽  
Jan Krystek ◽  
Tomáš Kroupa
Keyword(s):  
Static Analysis ◽  
Glass Fibre ◽  
Large Deformations ◽  
Bending Test ◽  
Test Results ◽  
Beam Test ◽  
Three Point Bending ◽  
Box Beams ◽  
Buckle Beam ◽  
Thin Walled

Different carbon and glass fibre strips were subjected to the double clamp buckle beam test. Furthermore, thin-walled glass fibre box-beams were subjected to the three-point bending test. Results of experiments were compared to different numerical simulations using buckling analysis or static analysis considering large deformations.

Computer analysis of thin-walled concrete box beams

1989 ◽  
Vol 16 (6) ◽  
pp. 902-909 ◽  
Author(s):  
Shahbaz Mavaddat ◽  
M. Saeed Mirza
Keyword(s):  
Key Words ◽  
Computer Analysis ◽  
Shear Stresses ◽  
Shear Lag ◽  
Applied Loading ◽  
Box Beam ◽  
Box Beams ◽  
Three Stages ◽  
Thin Walled ◽  
Normal And Shear Stresses

Three computer programs, written in FORTRAN WATFIV, are developed to analyze straight, monolithically cast, symmetric concrete box beams with one, two, or three cells and side cantilevers over a simple span or over two spans with symmetric mid-span loadings. The analysis, based on Maisel's formulation, is performed in three stages. First, the structure is idealized as a beam and the normal and shear stresses are calculated using the simple bending theory and St-Venant's theory of torsion. The secondary stresses arising from torsional and distortional warping and shear lag are calculated in the second and third stages, respectively. The execution times on an AMDAHL 580 system are 0.02, 0.93, and 0.25 s for the three programs, respectively. The stresses arising in each stage of analysis are then superposed to determine the overall response of the box section to the applied loading. The results are compared with Maisel's hand calculations. Key words: bending, bimoment, box beam, computer analysis, FORTRAN, shear, shear lag, thin-walled section, torsion, torsional and distortional warping.

On the Modeling of Coupled Vibration of Rotating Thin-Walled Closed-Section Composite Beams

2010 ◽  
Vol 26-28 ◽  
pp. 758-763
Author(s):  
Yong Sheng Ren ◽  
Xiang Hong Du ◽  
Wen Li Yao
Keyword(s):  
Equations Of Motion ◽  
Laminated Composite ◽  
Coupled Vibration ◽  
Cross Sectional ◽  
Box Beam ◽  
Vibration Model ◽  
Thin Walled ◽  
The Galerkin Method ◽  
Sectional Analysis ◽  
Asymptotical Method

The free vibration model of a rotating composite thin-walled closed-section beams is presented in this paper. The two-dimensional cross-sectional analysis based on the variational-asymptotical method(VAM) is combined with the Hamilton’s principle to derive the equations of motion and associated boundary conditions of the beams. The Galerkin method is employed in order to solve the coupled differential equations. The natural frequency results obtained for the present model are compared with those of the existing models. Numerical results are obtained for the laminated composite cantilevered box beam with Circumferentially Uniform Stiffness(CUS) configuration, the effects of the fiber orientation, pitch and precone on the natural frequencies associated with coupled vibration modes are investigated.

scholarly journals APPLICATION OF SUPERELEMENTS IN STATIC ANALYSIS OF THIN‐WALLED STRUCTURES

2004 ◽  
Vol 10 (2) ◽  
pp. 113-122
Author(s):  
Ireneusz Kreja ◽  
Tomasz Mikulski ◽  
Czeslaw Szymczak
Keyword(s):  
Static Analysis ◽  
Standard Procedure ◽  
Dimensional Model ◽  
Fem Model ◽  
Shell Elements ◽  
One Dimensional ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Proper Solutions

A concept of a beam superelement is suggested as a new tool in the static analysis of structures made of thin‐walled members. This proposal seems to be especially attractive for treating the problems where the existing one‐dimensional models do not provide proper solutions. This class of problems includes, for instance, the torsion of thin‐walled beams with battens and the determination of the bimoment distribution at the nodes of frames made of thin‐walled members. The entire segment of the thin‐walled beam with warping stiffener or the whole node of the frame is modelled with shell elements. The stiffness matrix of such thin‐walled beam superelement can be estimated according to the standard procedure of the enforced unit displacements. The accuracy of the proposed one‐dimensional model has proved to be comparable to that offered by the detailed FEM model where the whole structure is represented by a very large number of shell elements.

scholarly journals Theoretical and Experimental Analysis of Thin-Walled Curved Rectangular Box Beam under In-Plane Bending

Scanning ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Long Yanze ◽  
Zhang Ke ◽  
Shi Huaitao ◽  
Li Songhua ◽  
Zhang Xiaochen
Keyword(s):  
Finite Element ◽  
Test Theory ◽  
Theoretical Formula ◽  
Curved Beams ◽  
Beam Structures ◽  
Box Beam ◽  
Assumed Strain ◽  
Thin Walled ◽  
Plane Bending ◽  
Deformation Modes

Thin-walled curved box beam structures especially rectangular members are widely used in mechanical and architectural structures and other engineering fields because of their high strength-to-weight ratios. In this paper, we present experimental and theoretical analysis methods for the static analysis of thin-walled curved rectangular-box beams under in-plane bending based on 11 feature deformation modes. As to the numerical investigations, we explored the convergence and accuracy analysis by normal finite element analysis, higher-order assumed strain plane element, deep collocation method element, and inverse finite element method, respectively. The out-of-plane and in-plane characteristic deformation vector modes derived by the theoretical formula are superimposed by transforming the axial, tangential, and the normal deformation values into scalar tensile and compression amounts. A one-dimensional deformation experimental test theory is first proposed, formulating the specific contributions of various deformation modes. In this way, the magnitude and trend of the influence of each low-order deformation mode on the distortion and warping in the actual deformation are determined, and the significance of distortion and warping in the actual curved beams subjected to the in-plane loads is verified. This study strengthens the deformation theory of rectangular box-type thin-walled curved beams under in-plane bending, thus providing a reference for analyzing the mechanical properties of curved-beam structures.

Sign in / Sign up

Export Citation Format

Share Document