5585001 Waste water treatment method employing a continuous respiration meter and an apparatus thereof

1997 ◽  
Vol 23 (5) ◽  
pp. IV
2013 ◽  
Vol 803 ◽  
pp. 43-46 ◽  
Author(s):  
Bang Long Zhang ◽  
Song Zhou ◽  
Cai Ling Li ◽  
Cheng Kai Zhang ◽  
Chen Zhang

As the increasingly strict emission regulations, develop new and efficient desulfurization equipment, to meet the requirements of future Marine sulfur emissions control, ensure freedom of navigation in all waters of the ship, we need to desulfurization of diesel engine emissions. Waste desulfurization generated also need to process and strict inspection to reach the discharge standard of corresponding IMO. The main purpose of this paper is to study a new system for processing waste engine emission for marine diesel engine, this system will make waste liquid treatment becomes more efficient, energy saving, but also saves the cost of waste water treatment. This paper introduces a new technology for processing ship washing desulfurization waste liquid, we analyze the advantages and disadvantages of this equipment. Finally, this method gives the improving measures for the problems and prospects for the development trend of ship desulfurization wastewater treatment.


Author(s):  
Maria Y. Savostyanova ◽  
◽  
Lidia А. Norina ◽  
Arina V. Nikolaeva ◽  
◽  
...  

Retaining of water resources quality is one of the global ecological problems of the modern time. The most promising direction in solving the problem of water resources protection is the reduction of negative environmental influence of waste water from production facilities by upgrading the existing water treatment technologies. To treat utility water, technical and rain water from site facilities of Transneft system entities, the specialists developed and approved standard technological diagrams, which are used in producing treatment facilities. The standard technological diagrams provide for all necessary stages of waste water treatment ensures the reduction of pollution level to normal values. However, during operation of treatment facilities it was established, that to ensure the required quality of waste water treatment with initially high levels of pollution, the new technological solutions are necessary. The author presents the results of scientific-research work, in the context of which the best affordable technologies were identified in the area of the treatment of waste water with increased content of pollutants and non-uniform ingress pattern. On the basis of the research results the technical solutions were developed for optimization of operation of existing waste water treatment facilities by means of using combined treatment of technical and rain waters and utility waste waters and applying bioreactor with movable bed – biochips. The use of bioreactor with movable bed allows the increase in the area of active surface, which facilitates increase and retention of biomass. Biochips are completely immersed into waste waters, and biofilm is formed on the entire volume of immersion area, facilitating retention of biomass and preventing formation of sediments. Due to mixing the floating device with biofilm constantly moves along the whole area of bioreactor, and, in doing so, speeds up biochemical processes and uniformity of treatment. The advantages of a bioreactor with movable bed – its active sludge durability against increased and changing pollutant concentrations, change of waste water temperature and simplicity of application – ensured the possibility of its use for blending utility waters, technical and rain waters.


Sign in / Sign up

Export Citation Format

Share Document