scholarly journals Structural Effects of Cerium Oxides on Their Thermal Stability and Catalytic Performance in Propane Oxidation Dehydrogenation

2012 ◽  
Vol 33 (7-8) ◽  
pp. 1069-1074 ◽  
Author(s):  
Xufeng GAO ◽  
Chunlin CHEN ◽  
Shiyuan REN ◽  
Jian ZHANG ◽  
Dangsheng SU
Nanoscale ◽  
2020 ◽  
Vol 12 (27) ◽  
pp. 14825-14830
Author(s):  
Kai-Qiang Jing ◽  
Yu-Qing Fu ◽  
Zhi-Qiao Wang ◽  
Zhe-Ning Chen ◽  
Hong-Zi Tan ◽  
...  

Zn2+-Modified MgAl-LDH with ultra-low Pd cluster loading was synthesized. The higher adsorption energy and strong covalent metal–support interaction via forming Pd–Zn bonds over Pd/ZnMgAl-LDH account for the robust catalytic performance.


RSC Advances ◽  
2016 ◽  
Vol 6 (114) ◽  
pp. 113630-113647 ◽  
Author(s):  
Changshun Deng ◽  
Junning Qian ◽  
Chuxuan Yu ◽  
Yunan Yi ◽  
Pan Zhang ◽  
...  

The doping of variable valence metal cations into CeO2 is beneficial for catalytic NO reduction by CO.


2019 ◽  
Vol 19 (6) ◽  
pp. 3187-3196 ◽  
Author(s):  
Maria Mihet ◽  
Gabriela Blanita ◽  
Monica Dan ◽  
Lucian Barbu-Tudoran ◽  
Mihaela D Lazar

Pt/UiO-66 nanocomposites with platinum target concentration of 3 wt.% were prepared by 3 preparation methods, characterized and tested in the CO2 methanation process. Choice of the microporous UiO-66 metal-organic framework (Zr6O4(OH)4 with 1,4-benzene-dicarboxylate ligand) as catalytic support was motivated by the CO2 chemisorption capacity (proven by CO2-TPD profiles), large specific surface area (1477 m2/g) which favors a high dispersion of metal nanoparticles and good thermal stability. The preparation methods for the Pt/UiO-66 nanocomposites are: (1) wetimpregnation followed by reduction in H2 at 200 °C for 2 h; (2) wet-impregnation followed by reduction with an aqueous solution of NaBH4; and (3) “double-solvent” method, followed by reduction with NaBH4. The UiO-66 based nanocomposites were characterized by N2 adsorption–desorption (BET method), XRD, and SEM/TEM. The Pt/UiO-66 catalyst prepared by method 3 was chosen for catalytic testing due to its highest surface area, smallest platinum nanoparticles (PtNPs) size, the localization of PtNPs both on the grain’s internal and external surface and best thermal stability in the desired temperature range. Its capacity to adsorb and activate CO2 and H2 was evaluated in thermo-programmed desorption experiments (H2-TPD and CO2-TPD). Hydrogen is molecularly adsorbed, while CO2 is adsorbed both molecularly and dissociatively. The catalytic performance in the CO2 methanation process was evaluated by Temperature Programmed Reactions (TPRea, 2 °C/min, 30–350 °C), at atmospheric pressure. The best results were obtained at 350 °C, CO2:H2 molar ratio of 1:5.2 and GHSV ═ 1650 h−1. In these conditions CO2 conversion is almost 50% and CH4 selectivity is 36%, the rest of the converted CO2 being transformed in CO.


RSC Advances ◽  
2018 ◽  
Vol 8 (19) ◽  
pp. 10237-10245 ◽  
Author(s):  
Siyu Li ◽  
Feng Tang ◽  
Huixin Wang ◽  
Junran Feng ◽  
Zhaoxia Jin

Bimetallic Au–Ag@HNT and Pt–Ag@HNT nanocages showed significantly improved efficiency in the oxidation of o-phenylenediamine as peroxidase-like catalyst compared with corresponding monometallic nanoparticles.


2020 ◽  
pp. 174751982092599
Author(s):  
Heng Zhang ◽  
Chunhao Yang ◽  
Shengying Zhao ◽  
Tingting Wang ◽  
Wancheng Zhu

Ordered mesoporous silica, SBA-15 and MCM-41, and three-dimensionally ordered macroporous SiO2 were used as the supports of H4PMo11VO40 heteropolyacid for methacrolein oxidation. The dispersion and structural evolutions of the heteropolyacid along with thermal treatment were investigated. It was found that the heteropolyacid entered the one-dimensional mesoporous channels of SBA-15 and MCM-41, and the crystallization and growth were limited, leading to high dispersion of the heteropolyacid. However, the thermal stability was decreased under high dispersion. The migration of the heteropolyacid was observed to the end of the one-dimensional channels of SBA-15 and the outer surface of MCM-41 with calcination, accompanied by the decomposition of the heteropolyacid and the formation of MoO3. In comparison, the crystallization and growth of heteropolyacid were not limited in the open macropores of three-dimensionally ordered macroporous SiO2. Dispersed particles on the surface of the macropores with size of about 5 nm exhibited a higher thermal stability. The decomposition of the heteropolyacid in the SBA-15 and MCM-41 supported catalysts resulted in the loss of strong acid sites, causing low selectivity to methacrylic acid in methacrolein oxidation. High thermal stability with high exposure of the active sites in the three-dimensionally ordered macroporous SiO2 supported catalyst contributed to the enhancement in the catalytic performance.


2016 ◽  
Vol 6 (12) ◽  
pp. 4337-4344 ◽  
Author(s):  
Xiaolong Liu ◽  
Junlin Zeng ◽  
Jian Wang ◽  
Wenbo Shi ◽  
Tingyu Zhu

Ruthenium-based catalysts Ru/TiO2, Ru/SiO2, Ru/γ-Al2O3, and Ru/ZrO2 were prepared and evaluated for CH3Br oxidation, and Ru/TiO2 showed the best catalytic performance. Product selectivity, thermal stability, and anti-moisture properties were also studied.


Catalysts ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 910 ◽  
Author(s):  
Nasim Ghaffari Saeidabad ◽  
Young Su Noh ◽  
Ali Alizadeh Eslami ◽  
Hyun Tae Song ◽  
Hyun Dong Kim ◽  
...  

In the last decades, environmental crises and increasing energy demand have motivated researchers to investigate the practical techniques for the production of clean fuels through renewable energy resources. It is essential to develop technologies to utilize glycerol as a byproduct derived from biodiesel. Glycerol is known as a sustainable and clean source of energy, which can be an alternative resource for the production of value-added chemicals and hydrogen. The hydrogen production via steam reforming (SR) of glycerol using Ni-based catalysts is one of the promising approaches for the entry of the hydrogen economy. The purpose of this review paper is to highlight the recent trends in hydrogen production over Ni-based catalysts using the SR of glycerol. The intrinsic ability of Ni to disperse easily over variable supports makes it a more viable active phase for the SR catalysts. The optimal reaction conditions have been indicated as 650–900 °C, 1 bar, and 15 wt% Ni in catalysts for high glycerol conversion. In this review paper, the effects of various supports, different promoters (K, Ca, Sr, Ce, La, Cr, Fe), and process conditions on the catalytic performance have been summarized and discussed to provide a better comparison for the future works. It was found that Ce, Mg, and La have a significant effect on catalytic performance as promoters. Moreover, SR of glycerol over hydrotalcite and perovskite-based catalysts have been reviewed as they suggest high catalytic performance in SR of glycerol with improved thermal stability and coke resistance. More specifically, the Ni/LaNi0.9Cu0.1O3 synthesized using perovskite-type supports has shown high glycerol conversion and sufficient hydrogen selectivity at low temperatures. On the other hand, hydrotalcite-like catalysts have shown higher catalytic stability due to high thermal stability and low coke formation. It is vital to notice that the primary concern is developing a high-performance catalyst to utilize crude glycerol efficiently.


2010 ◽  
Vol 93 (3-4) ◽  
pp. 395-405 ◽  
Author(s):  
Begoña Puertolas ◽  
Benjamín Solsona ◽  
Said Agouram ◽  
Ramón Murillo ◽  
Ana María Mastral ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document