Pt/UiO-66 nanocomposites with platinum target concentration of 3 wt.% were prepared by 3 preparation methods, characterized and tested in the CO2 methanation process. Choice of the microporous UiO-66 metal-organic framework (Zr6O4(OH)4 with
1,4-benzene-dicarboxylate ligand) as catalytic support was motivated by the CO2 chemisorption capacity (proven by CO2-TPD profiles), large specific surface area (1477 m2/g) which favors a high dispersion of metal nanoparticles and good thermal stability. The
preparation methods for the Pt/UiO-66 nanocomposites are: (1) wetimpregnation followed by reduction in H2 at 200 °C for 2 h; (2) wet-impregnation followed by reduction with an aqueous solution of NaBH4; and (3) “double-solvent” method, followed by reduction
with NaBH4. The UiO-66 based nanocomposites were characterized by N2 adsorption–desorption (BET method), XRD, and SEM/TEM. The Pt/UiO-66 catalyst prepared by method 3 was chosen for catalytic testing due to its highest surface area, smallest platinum nanoparticles
(PtNPs) size, the localization of PtNPs both on the grain’s internal and external surface and best thermal stability in the desired temperature range. Its capacity to adsorb and activate CO2 and H2 was evaluated in thermo-programmed desorption experiments (H2-TPD
and CO2-TPD). Hydrogen is molecularly adsorbed, while CO2 is adsorbed both molecularly and dissociatively. The catalytic performance in the CO2 methanation process was evaluated by Temperature Programmed Reactions (TPRea, 2 °C/min, 30–350 °C),
at atmospheric pressure. The best results were obtained at 350 °C, CO2:H2 molar ratio of 1:5.2 and GHSV ═ 1650 h−1. In these conditions CO2 conversion is almost 50% and CH4 selectivity is 36%, the rest of the converted CO2
being transformed in CO.
Au–Ag and Pt–Ag bimetallic nanoparticles@halloysite nanotubes: morphological modulation, improvement of thermal stability and catalytic performance
