Obduction, subduction and collision as reflected in the Upper Cretaceous–Lower Eocene sedimentary record of western Turkey

2001 ◽  
Vol 138 (2) ◽  
pp. 117-142 ◽  
Author(s):  
ARAL I. OKAY ◽  
İZVER TANSEL ◽  
OKAN TÜYSÜZ

Late Cretaceous–Early Eocene Tethyan evolution of western Turkey is characterized by ophiolite obduction, high-pressure/low-temperature metamorphism, subduction, arc magmatism and continent–continent collision. The imprints of these events in the Upper Cretaceous–Lower Eocene sedimentary record of western Anatolia are studied in thirty-eight well-described stratigraphic sections. During the Late Cretaceous period, western Turkey consisted of two continents, the Pontides in the north and the Anatolide-Taurides in the south. These continental masses were separated by the İzmir-Ankara Neo-Tethyan ocean. During the convergence the Pontides formed the upper plate, the Anatolide-Taurides the lower plate. The arc magmatism in the Pontides along the Black Sea coast is biostratigraphically tightly constrained in time between the late Turonian and latest Campanian. Ophiolite obduction over the passive margin of the Anatolide-Tauride Block started in the Santonian soon after the inception of subduction in the Turonian. As a result, large areas of the Anatolide-Tauride Block subsided and became a region of pelagic carbonate sedimentation during the Campanian. The leading margin of the Anatolide-Tauride Block was buried deeply and was deformed and metamorphosed to blueschist facies during Campanian times. The Campanian arc volcanic rocks in the Pontides are conformably overlain by shaley limestone of Maastrichtian–Palaeocene age. However, Maastrichtian sedimentary sequences north of the Tethyan suture are of fore-arc type suggesting that although arc magmatism ceased by the end of the Campanian age, continent–continent collision was delayed until Palaeocene time, when there was a change from marine to continental sedimentation in the fore-arc basins. The interval between the end of the arc magmatism and continent–continent collision may have been related to a northward jump of the subduction zone at the end of Campanian time, or to continued obduction during the Maastrichtian.

2020 ◽  
Author(s):  
Burak Semih Cabuk ◽  
Mualla Cengiz

<p>The Marmara region is located on the Alpine Himalayan orogenic belt which experienced a active tectonic deformation. The region consists of tectonic units such as the Istanbul Zone, the Strandja Zone and the Sakarya Continent. It is reported in the previous geological studies that the Istanbul Zone began to move southwards appart from the Moesia Platform with the effect of West Blacksea Fault in the west and West Crimea Fault in the east after the the opening of the Black Sea in the Cretaceous. It is known that the Intra Pontide suture is formed after the closure of the Intra-Pontide ocean during the Early Eocene due to the collision between İstanbulzone and the Sakarya continent which moved northwards. As a result of the continental collision, the region has completed its evolution under the influence of basin formation and the emplacement of North Anatolian Fault Zone from Miocene to the present.</p><p> </p><p>In this study, Upper Cretaceous-Oligocene sedimentary and volcanic rocks were sampled at 103 sites to investigate the tectonic deformation of the area. As a result of rock magnetism studies, it was shown that magnetic minerals in sedimentary and volcanic rocks are defined by titanium-rich titanomagnetite showing low coercivity, while in limestone samples, magnetization is defined by hematite showing high coercivity. As a result of anisotropy of magnetic susceptibility (AMS) measurements, it was observed that most of the samples show magnetic foliation and a deformation ellipsoid which is oblate. Paleomagnetic results show counterclockwise rotation of 19.9°±10.9° for the Sakarya continent, 27.4°±11.6°for the Pontides and 15.6°±11.8°for the Strandja Zone from Eocene to present. The results indicate that the region has completed the collision in Eocene and rotated counterclockwise as a large block. Deformation due to basin development or fault bounded block rotations which developed after Miocene could not been detected in this study. Miocene paleomagnetic data from previous studies in the study area are compatible with counterclockwise rotations in Upper Cretaceous-Oligocene which shows that different blocks emplaced in the study area moved together as a single plate during Eocene-Miocene time.</p>


2020 ◽  
Author(s):  
Clay Campbell ◽  
◽  
Michael H. Taylor ◽  
Megan Mueller ◽  
Alexis Licht ◽  
...  

Geosphere ◽  
2019 ◽  
Vol 15 (4) ◽  
pp. 1066-1101 ◽  
Author(s):  
Jeffrey M. Trop ◽  
Jeff Benowitz ◽  
Ronald B. Cole ◽  
Paul O’Sullivan

AbstractThe Alaska Range suture zone exposes Cretaceous to Quaternary marine and nonmarine sedimentary and volcanic rocks sandwiched between oceanic rocks of the accreted Wrangellia composite terrane to the south and older continental terranes to the north. New U-Pb zircon ages, 40Ar/39Ar, ZHe, and AFT cooling ages, geochemical compositions, and geological field observations from these rocks provide improved constraints on the timing of Cretaceous to Miocene magmatism, sedimentation, and deformation within the collisional suture zone. Our results bear on the unclear displacement history of the seismically active Denali fault, which bisects the suture zone. Newly identified tuffs north of the Denali fault in sedimentary strata of the Cantwell Formation yield ca. 72 to ca. 68 Ma U-Pb zircon ages. Lavas sampled south of the Denali fault yield ca. 69 Ma 40Ar/39Ar ages and geochemical compositions typical of arc assemblages, ranging from basalt-andesite-trachyte, relatively high-K, and high concentrations of incompatible elements attributed to slab contribution (e.g., high Cs, Ba, and Th). The Late Cretaceous lavas and bentonites, together with regionally extensive coeval calc-alkaline plutons, record arc magmatism during contractional deformation and metamorphism within the suture zone. Latest Cretaceous volcanic and sedimentary strata are locally overlain by Eocene Teklanika Formation volcanic rocks with geochemical compositions transitional between arc and intraplate affinity. New detrital-zircon data from the modern Teklanika River indicate peak Teklanika volcanism at ca. 57 Ma, which is also reflected in zircon Pb loss in Cantwell Formation bentonites. Teklanika Formation volcanism may reflect hypothesized slab break-off and a Paleocene–Eocene period of a transform margin configuration. Mafic dike swarms were emplaced along the Denali fault from ca. 38 to ca. 25 Ma based on new 40Ar/39Ar ages. Diking along the Denali fault may have been localized by strike-slip extension following a change in direction of the subducting oceanic plate beneath southern Alaska from N-NE to NW at ca. 46–40 Ma. Diking represents the last recorded episode of significant magmatism in the central and eastern Alaska Range, including along the Denali fault. Two tectonic models may explain emplacement of more primitive and less extensive Eocene–Oligocene magmas: delamination of the Late Cretaceous–Paleocene arc root and/or thickened suture zone lithosphere, or a slab window created during possible Paleocene slab break-off. Fluvial strata exposed just south of the Denali fault in the central Alaska Range record synorogenic sedimentation coeval with diking and inferred strike-slip displacement. Deposition occurred ca. 29 Ma based on palynomorphs and the youngest detrital zircons. U-Pb detrital-zircon geochronology and clast compositional data indicate the fluvial strata were derived from sedimentary and igneous bedrock presently exposed within the Alaska Range, including Cretaceous sources presently exposed on the opposite (north) side of the fault. The provenance data may indicate ∼150 km or more of dextral offset of the ca. 29 Ma strata from inferred sediment sources, but different amounts of slip are feasible.Together, the dike swarms and fluvial strata are interpreted to record Oligocene strike-slip movement along the Denali fault system, coeval with strike-slip basin development along other segments of the fault. Diking and sedimentation occurred just prior to the onset of rapid and persistent exhumation ca. 25 Ma across the Alaska Range. This phase of reactivation of the suture zone is interpreted to reflect the translation along and convergence of southern Alaska across the Denali fault driven by highly coupled flat-slab subduction of the Yakutat microplate, which continues to accrete to the southern margin of Alaska. Furthermore, a change in Pacific plate direction and velocity at ca. 25 Ma created a more convergent regime along the apex of the Denali fault curve, likely contributing to the shutting off of near-fault extension-facilitated arc magmatism along this section of the fault system and increased exhumation rates.


2006 ◽  
Vol 177 (5) ◽  
pp. 249-266 ◽  
Author(s):  
Grigor Heba ◽  
Gilbert Prichonnet

Abstract Two sections, respectively in the Kruje-Dajt and Makareshi massifs of the Kruja Zone carbonate platform (located in the Apulian passive margin of Albania), and representing a period which extends from the Late Cretaceous to the Eocene, have been studied from several points of view : biostratigraphy, lithology and sequence stratigraphy. The proposed biozonation for the Late Cretaceous which has been established with benthic foraminifera (CsB4, CsB5, CsB6 and CsB7) improves substantially the stratigraphy for this period in this region. Eleven different facies (F1 to F11) characterise the Upper Cretaceous-Paleocene-Eocene carbonate sediments, and are distinguished for the first time. Fourteen sequences in the Kruje-Dajt massif and seven sequences in the Makareshi massif are recognized, using sedimentological criteria and clearly distinguished according to an established model for calcareous facies of this platform. Intense early dolomitization (sebkha type) is generally superimposed to the facies. The two sections represent a mostly homogeneous environment, evolving from the infra to supratidal environments. However, small variations of subenvironments are observed and linked to local and temporary variations of the platform. They are attributed to frequent eustatic fluctuations, and in two cases at least to instabilities of the platform which had cause emergencies and temporal discontinuities at the end of Cretaceous and early Eocene times (ca 20 and 5 m.y.).


1992 ◽  
Vol 29 (5) ◽  
pp. 854-864 ◽  
Author(s):  
Craig H. B. Leitch ◽  
C. T. Hood ◽  
Xiao-Lin Cheng ◽  
A. J. Sinclair

Rocks hosting the Silver Queen epithermal Au–Ag–Zn–Pb–Cu vein deposit near Owen Lake, British Columbia, belong to the Tip Top Hill volcanics. They are lithologically similar to the informally named Upper Cretaceous Kasalka Group rocks exposed in the type area at Tahtsa Lake, 75 km southwest of the deposit, and at Mount Cronin, 100 km northwest of the deposit. The Kasalka Group rocks in the Tahtsa Lake area give questionable dates of 105 ± 5 Ma by K–Ar on whole rock but are cut by intrusions dated at 83.8 ± 2.8 Ma by K–Ar on biotite. The sequence at the Silver Queen deposit includes a polymictic conglomerate, followed upward by felsic fragmental rocks and a thick porphyritic andesite flow and sill unit, cut by microdiorite and quartz–feldspar porphyry intrusions. The porphyritic andesite and the microdiorite have been dated as Late Cretaceous (78.3 ± 2.7 and 78.7 ± 2.7 Ma, respectively, by K–Ar on whole rock), close to previous dates for these rocks (77.1 ± 2.7 and 75.3 ± 2.0 Ma, respectively). The quartz–feldspar porphyry intrudes the porphyritic andesites but has an older U–Pb zircon date of 84.6 ± 0.2 Ma, probably due to underestimation of the true age of the host rocks by the K–Ar whole-rock method. Later dykes correlate with younger volcanic rocks belonging to the Ootsa Lake and Endako groups. Eocene pre- and postmineral plagioclase-rich dykes (51.9 ± 1.8 to 51.3 ± 1.8 Ma) and late diabase dykes (50.4 ± 1.8 Ma; all by K–Ar on whole rock) may be correlative with trachyandesite volcanics of the Goosly Lake Formation, part of the Eocene Endako Group. These volcanics have been dated elsewhere at 55.6 ± 2.5 to 48.8 ± 1.8 Ma by K–Ar on whole rock and biotite, respectively. Mineralization at Silver Queen is therefore similar in age to, but slightly younger than, the producing Equity mine located 30 km to the northeast, which is estimated at 58.5 ± 2.0 Ma by K–Ar on whole rock.


2021 ◽  
Vol 9 (9) ◽  
pp. 921
Author(s):  
Dmitry A. Ruban

Marine geoheritage is an important but still underdeveloped concept. Field investigations in the Abrau area (Krasnodar Region, southwestern Russia) and subsequent interpretations allow for the characterization of its geoheritage. Two geosites, namely Abrau and Limanchik, are delineated and assessed semi-qualitatively. Their high heritage value, complexity, and appropriate “technical” properties are appraised. The Abrau geosite features Abrau Lake with its enigmatic origin and the outcrops of deformed Upper Cretaceous carbonate flysch deposits. The Limanchik geosite represents an outstanding example of coastal abrasion, Paleocene siliciclastic flysch with trace fossils, and a coastal lagoon separated from the sea by a bar. The heritage aspects of the study areas are related to the development of the Late Cretaceous, Paleocene, and Pliocene seas, as well as to the active dynamics of the Black Sea coastal zone. The duality of marine geoheritage is linked to its relation to both ancient and modern marine environments.


2001 ◽  
Vol 38 (1) ◽  
pp. 59-73
Author(s):  
J W Riesterer ◽  
J Brian Mahoney ◽  
Paul Karl Link

Upper Cretaceous coarse clastic rocks exposed in the canyon of Churn Creek, south-central British Columbia, record active basin tectonism and coeval volcanism adjacent to the boundary between the Intermontane and Insular superterranes. Mid to late Albian (~104 Ma U–Pb), calc-alkaline andesite and basaltic andesite flows, with minor conglomerate and reworked epiclastic deposits and tuffs correlative with the Spences Bridge Group of the Intermontane superterrane are exposed in the canyon. In depositional contact above the volcanic rocks is the conglomerate of Churn Creek, which contains a thick (>1 km) sequence of complexly intertonguing conglomerate and sandstone that is divided into two members composed of four lithofacies. The lower member was deposited unconformably on the underlying Albian volcanic unit and contains late Albian–Cenomanian chert-pebble (>50% chert) conglomerate and interbedded chert- and volcanic-lithic sandstone. It is interpreted to have been deposited in a braided stream system flowing from southeast to northwest. The source for the chert was most likely the Bridge River terrane, a Mississippian to Jurassic ocean floor assemblage located to the southwest of Churn Creek, south of the Yalakom fault. Gradationally overlying the lower member throughout much of the basin is a mixed chert, plutonic, and volcaniclastic lithofacies of the upper member. Plutonic debris was provided to the mixed and plutonic lithofacies of the upper member by the Little Basin pluton, which was uplifted along the northeast-directed Little Basin thrust fault on the southwest margin of the basin. The upper member also contains a volcanic-rich lithofacies composed of chaotic volcanic conglomerate and local lithic tuff derived from a coeval proximal volcanic source. The conglomerate of Churn Creek records active northeast-vergent compressional tectonism and development of piggyback basins along the boundary between the Insular and Intermontane superterranes during Albian–Santonian time. The conglomerate of Churn Creek has been correlated to the Silverquick – Powell Creek succession of the Methow terrane, based on age, stratigraphic, lithologic, structural, geochemical, and paleomagnetic similarities, and may, therefore, represent an overlap assemblage linking the superterranes in the Late Cretaceous.


2009 ◽  
Vol 146 (4) ◽  
pp. 567-590 ◽  
Author(s):  
SAMUEL P. RICE ◽  
ALASTAIR H. F. ROBERTSON ◽  
TIMUR USTAÖMER ◽  
NURDAN İNAN ◽  
KEMAL TASLI

AbstractSix individual tectonostratigraphic units are identified within the İzmir–Ankara–Erzincan Suture Zone in the critical Erzincan area of the Eastern Pontides. The Ayıkayası Formation of Campanian–Maastrichtian age is composed of bedded pelagic limestones intercalated with polymict, massive conglomerates. The Ayıkayası Formation conformably overlies the Tauride passive margin sequence in the Munzur Mountains to the south and is interpreted as an underfilled foredeep basin. The Refahiye Complex, of possible Late Cretaceous age, is a partial ophiolite composed of ~75% (by volume) serpentinized peridotite (mainly harzburgite), ~20% diabase and minor amounts of gabbro and plagiogranite. The complex is interpreted as oceanic lithosphere that formed by spreading above a subduction zone. Unusual screens of metamorphic rocks (e.g. marble and schist) locally occur between sheeted diabase dykes. The Upper Cretaceous Karayaprak Mélange exhibits two lithological associations: (1) the basalt + radiolarite + serpentinite association, including depleted arc-type basalts; (2) the massive neritic limestone + lava + volcaniclastic association that includes fractionated, intermediate-composition lavas, and is interpreted as accreted Neotethyan seamount(s). The several-kilometre-thick Karadağ Formation, of Campanian–Maastrichtian age, is composed of greenschist-facies volcanogenic rocks of mainly basaltic to andesitic composition, and is interpreted as an emplaced Upper Cretaceous volcanic arc. The Campanian–Early Eocene Sütpınar Formation (~1500 m thick) is a coarsening-upward succession of turbiditic calcarenite, sandstone, laminated mudrock, volcaniclastic sedimentary rocks that includes rare andesitic lava, and is interpreted as a regressive forearc basin. The Late Paleocene–Eocene Sipikör Formation is a laterally varied succession of shallow-marine carbonate and siliciclastic lithofacies that overlies deformed Upper Cretaceous units with an angular unconformity. Structural study indicates that the assembled accretionary prism, supra-subduction zone-type oceanic lithosphere and volcanic arc units were emplaced northwards onto the Eurasian margin and also southwards onto the Tauride (Gondwana-related) margin during Campanian–Maastrichtian time. Further, mainly southward thrusting took place during the Eocene in this area, related to final closure of Tethys. Our preferred tectonic model involves northward subduction, supra-subduction zone ophiolite genesis and arc magmatism near the northerly, Eurasian margin of the Mesozoic Tethys.


2019 ◽  
Vol 59 (6) ◽  
pp. 1074-1085
Author(s):  
E. A. Sokolova

The article analyzes own data on the species composition of shells of planktonic foraminifera from the Upper Cretaceous sediments of the Indian Oceans, as well as from the sections of the offshore seas of Australia. The species of planktonic foraminifera are grouped and arranged in a climatic series. An analysis of the change in the systematic composition of foraminifers made it possible to distinguish periods of extreme and intermediate climatic states in the Late Cretaceous.


Sign in / Sign up

Export Citation Format

Share Document