Structural evolution of the northeast Asian continental margin: an example from the western Koryak fold and thrust belt (northeast Russia)

1998 ◽  
Vol 135 (3) ◽  
pp. 311-330 ◽  
Author(s):  
ANDREI K. KHUDOLEY ◽  
SERGEI D. SOKOLOV

The western Koryak fold and thrust belt consists of a set of tectonostratigraphic terranes that contain units ranging from Lower Palaeozoic to Cenozoic. Three deformational events have been identified in the study area. The first event structures are folds, domes and shear zones with related high-pressure/low-temperature metamorphism. These structures are early Carboniferous and are only recognized in the metamorphic terranes. The second event structures are imbricate fans of thrusts and folds with southeast vergence, broken formation and serpentinite mélange. These are latest Jurassic to early Cretaceous (early Albian) and occur throughout the study area. During this event, thrusting was accompanied by dextral strike-slip faulting. The second event structures are overlapped by the Upper Albian sedimentary rocks with an angular unconformity at the base. During metamorphism associated with the first and second deformational events, some of the rocks were metamorphosed to blueschist grade and were affected by strain with axial ratios of up to 15[ratio ]1. The third deformational event is characterized by significant sinistral strike-slip displacement at higher crustal levels. This resulted in a new set of structures and rotation of pre-existing structures. The age of the sinistral strike-slip faults is interpreted to be late Cretaceous to Cenozoic. The kinematics of the second and third deformational events correspond to assumed proto-Pacific plate motions based on palaeomagnetic data.

Geosciences ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 311
Author(s):  
Hamid Hussain ◽  
Zhang Shuangxi

The Kohat fold and thrust belt, located in North-Western Pakistan, is a part of Lesser Himalaya developed due to the collision between the Indian and Eurasian plates. The structural evolution records of this area indicate that it consists of tight anticlines and broad syncline structures. Previous studies show that the structural pattern of this area has been produced due to multiple episodes of deformation. In the present research, 2D seismic data has been integrated with our field surveys to clarify the role of active strike-slip faulting in reshaping the surface structures of Shakardarra, Kohat. At the surface, doubly plunging anticlines and synclines are evolved on evaporites as detachment folds, truncated by thrust faults along their limbs. Seismic data show that the thrust faults originate from basal detachment located at the sedimentary-crystalline interface and either cut up section to the surface or lose their displacement to splay or back thrusts. At the surface, the Shakardarra Fault, the Tola Bangi Khel Fault, the Chorlaki Fault, and the axial trend of fold change their strike from EW to NS showing that the thrust and axial trend of folds are rotated along the vertical axis by the influence of the Kalabagh strike-slip fault. Strike-slip motion dominates the style of deformation at the northern segment. The current deformation is concentrated on the splay faults in the northern segment of the Kalabagh Fault. We propose that Shakardarra is sequentially evolved in three episodes of deformation. In the first phase, the detachment folds developed on Eocene evaporites, which are truncated by thrust faults originated from the basal detachment in the second phase. In the third phase, early formed folds and faults are rotated along the vertical axis by the influence of Kalabagh strike-slip fault.


2021 ◽  
Vol 145 ◽  
pp. 104310
Author(s):  
Humaad Ghani ◽  
Edward R. Sobel ◽  
Gerold Zeilinger ◽  
Johannes Glodny ◽  
Irum Irum ◽  
...  

2014 ◽  
Vol 86 (3) ◽  
pp. 1101-1113 ◽  
Author(s):  
FABRÍCIO A. CAXITO ◽  
ALEXANDRE UHLEIN ◽  
LUIZ F.G. MORALES ◽  
MARCOS EGYDIO-SILVA ◽  
JULIO C.D. SANGLARD ◽  
...  

The Rio Preto fold belt borders the northwestern São Francisco craton and shows an exquisite kilometric doubly-vergent asymmetric fan structure, of polyphasic structural evolution attributed exclusively to the Brasiliano Orogeny (∼600-540 Ma). The fold belt can be subdivided into three structural compartments: The Northern and Southern compartments showing a general NE-SW trend, separated by the Central Compartment which shows a roughly E-W trend. The change of dip of S2, a tight crenulation foliation which is the main structure of the fold belt, between the three compartments, characterizes the fan structure. The Central Compartment is characterized by sub-vertical mylonitic quartzites, which materialize a system of low-T strike slip shear zones (Malhadinha – Rio Preto Shear Zone) crosscutting the central portion of the fold belt. In comparison to published analog models, we consider that the unique structure of the Rio Preto fold belt was generated by the oblique, dextral-sense interaction between the Cristalândia do Piauí block to the north and the São Francisco craton to the south.


1991 ◽  
Vol 128 (4) ◽  
pp. 307-318 ◽  
Author(s):  
C. W. Passchier ◽  
R. F. Bekendam ◽  
J. D. Hoek ◽  
P. G. H. M. Dirks ◽  
H. de Boorder

AbstractThe presence of polyphase shear zones transected by several suites of dolerite dykes in Archaean basement of the Vestfold Hills, East Antarctica, allows a detailed reconstruction of the local structural evolution. Archaean and early Proterozoic deformation at granulite facies conditions was followed by two phases of dolerite intrusion and mylonite generation in strike-slip zones at amphibolite facies conditions. A subsequent middle Proterozoic phase of brittle normal faulting led to the development of pseudotachylite, predating intrusion of the major swarm of dolerite dykes around 1250 Ma. During the later stages and following this event, pseudotachylite veins were reactivated as ductile, mylonitic thrusts under prograde conditions, culminating in amphibolite facies metamorphism around 1000–1100 Ma. This is possibly part of a large-scale tectonic event during which the Vestfold block was overthrust from the south. In a final phase of strike-slip deformation, several pulses of pseudotachylite-generating brittle faulting alternated with ductile reactivation of pseudotachylite.


2020 ◽  
Author(s):  
Saskia Köhler ◽  
Florian Duschl ◽  
Hamed Fazlikhani ◽  
Daniel Köhn

<p>The Franconian Basin in SE Germany has seen a complex stress history indicative of several extensional and compressional phases e.g. the Iberia-Europe collision acting on a pre-faulted Variscan basement. Early Cretaceous extension is followed by Late Cretaceous inversion with syntectonic sedimentation and deformation increasing progressively from SW to NE culminating in the Franconian Line where basement rocks are thrusted over the Mesozoic cover. The development of this intracontinental fold-and-thrust belt is followed by Paleogene extension associated with the formation of the Eger Graben, which is then succeeded by a new compressional event as a consequence of the Alpine orogeny.</p><p>We use existing data from literature and geological maps and new field data to construct balanced cross-sections in order to reveal the architecture of the Cretaceous fold-and-thrust belt. In addition, we undertake paleostress analysis using a combination of fault slip information, veins and tectonic and sedimentary stylolites to identify stress events in the study area, as well as their nature and timing. Furthermore, we try to understand how basement faults influence younger faults in the cover sequence.</p><p>Our paleostress data indicates that at least five different stress events existed in Mesozoic to Cenozoic times (from old to young): (1) an N-S directed extensional stress field with E-W striking normal faults, (2) a NNE-SSW directed compressional stress field causing thrusting and folding of the cover sequence, (3) a strike slip regime with NE-SW compression and NW-SE extension, (4) an extensional event with NW-SE extension and the formation of ENE-WSW striking faults according to the formation of the Eger Graben in the E, and finally (5) a strike slip regime with NW-SE compression and NE-SW extension related to Alpine stresses. The geometry of faulting and deformation varies significantly over the regions with respect to the influence of and distance to inherited Variscan structures.</p><p>We argue that the extensional event of stress field (1) provides spacing for Early Cretaceous sedimentation in the Franconian Basin. This is followed by the creation of an intracontinental fold-and-thrust belt during stress fields (2) and (3) with a slight rotation of the main compressive stress during these events in Late Cretaceous. We associate the following extension to the development of the Eger Graben in Miocene time. Finally, a NW-SE directed compression related to Alpine stresses in an intracontinental strike-slip regime is following. Reconstruction of the Cretaceous fold-and-thrust belt reveals mainly fault propagation folding with deep detachments sitting below the cover sequence indicating thick-skinned tectonics. We argue that the Franconian Line is a thrust with a steeply dipping root that belongs to the same fold-and-thrust belt.</p>


2020 ◽  
Author(s):  
Alexander Razmadze

<p>Gare Kakheti foothills are located between Lesser Caucasus and Kakheti Ridge and are mainly represented by the series of NEN dipping thrust faults, most of which are associated with fault‐related folds. Gare Kakheti foothills as a part of the Kura foreland fold-and-thrust belt developed formerly as a foreland basin (Oligocene-Lower Miocene) (e.g. Alania et al., 2017). Neogene shallow marine and continental sediments in the Gare Kakheti foothills keep the record on the stratigraphy and structural evolution of the study area during the compressive deformation. Interpreted seismic profiles and structural cross-sections across the Udabno, Tsitsmatiani, and Berebisseri synclines show that they are thrust-top basins. Seismic reflection data reveal the presence of growth fault-propagation folds and some structural wedges (or duplex). The evolution of the Udabno, Tsitsmatiani, and Berebisseri basins is compared with simple models of thrust-top basins whose development is controlled by the kinematics of competing for growth anticlines. Growth anticlines are mainly represented by fault-propagation folds. The geometry of growth strata in associated footwall synclines and the sedimentary infill of thrust-top basins provide information on the thrusting activity in terms of location, geometry, and age.<br>This work was supported by Shota Rustaveli National Science Foundation (SRNSF - #PHDF-19-268).</p><p> </p>


Sign in / Sign up

Export Citation Format

Share Document