Linseed as a dual-purpose crop: evaluation of cultivar suitability and analysis of yield determinants

2018 ◽  
Vol 156 (2) ◽  
pp. 162-176 ◽  
Author(s):  
G. Fila ◽  
M. Bagatta ◽  
C. Maestrini ◽  
E. Potenza ◽  
R. Matteo
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Structural Equation ◽  
Oil Content ◽  
Seed Oil ◽  
Plant Density ◽  
Emerging Market ◽  
Raw Material ◽  
Dual Purpose ◽  
Fibre Yield

AbstractLinseed is enjoying renewed popularity worldwide thanks to emerging market opportunities for raw material derived from seeds and stems. The dual-purpose cultivation is particularly attractive to growers for its capacity to yield both seed/oil and straw/fibre; however, field-based research is necessary to identify suitable cultivars to meet modern production goals. Under these premises, a 3-year experimental campaign was conducted to evaluate 18 linseed cultivars potentially interesting for dual-purpose cultivation in Northern Italy. Cultivar performance was evaluated in terms of seed, straw and fibre yield, oil composition and stem fibre content. Inter-annual weather variability explained the largest portion of the total variance. However, the ‘cultivar × year’ interaction was not significant except for seed oil content and composition. Stability analysis showed that at least half of the cultivars were unstable for oil content and α-linolenic acid fraction. A Structural Equation Model was developed to investigate causal relationships between the productive performance and factors such as environmental variables, phenological traits, plant size and density. Rainfall was beneficial to seed yield, both before and after flowering, whereas higher post-flowering air temperature had a depressive effect. A higher oil content was favoured by pre-flowering rainfall. Plant height was negatively associated with seed yield and oil content, but it was positively associated with straw and fibre yield. Plant density was critical for fibre yield since below 500 plants/m2 the increased plant branching makes it difficult to extract fibre. Together with plant density, plant height could be used to manipulate the seed/straw ratio according to production goals.

Impact of agronomic factors on seed yield formation and quality in flax

2008 ◽  
Vol 88 (3) ◽  
pp. 485-500 ◽  
Author(s):  
G. P. Lafond ◽  
B. Irvine ◽  
A. M. Johnston ◽  
W. E. May ◽  
D. W. McAndrew ◽  
...  
Keyword(s):  
Seed Yield ◽  
Oil Content ◽  
Seed Oil ◽  
Plant Density ◽  
Oil Quality ◽  
Seeding Rate ◽  
Nitrogen Rate ◽  
Seeding Date ◽  
Rate Interaction ◽  
Yield Formation

Flaxseed is known to have significant health benefits in human nutrition and when included in animal rations. There is pressing need to improve flaxseed production to meet the growing demand. The objective was to study the effects of three seeding rates (22, 45 and 67 kg ha-1), two seeding dates (early May and late May), three rates of nitrogen (66, 100 and 133% of recommended) and three cultivars (Norlin, AC McDuff and CDC Valour) and at five locations representative of the flax-growing area of the Canadian prairies from 1999 to 2001. The variables of interest were plant density, seed yield and yield formation, seed oil content and oil quality. Plant establishment was always highest with Norlin, but bolls m-2 was similar between the three cultivars. Plant density was always highest with the later plantings. No overall effect of seeding date was observed on grain yield, but the site-year by seeding date interaction showed that the later planting was favoured by the most northerly sites and early planting at the most southerly sites. The sites intermediate in latitude showed little response to seeding date. This finding provides important information with respect to the inclusion of flax in cropping systems depending on the latitude and deciding on the order of planting. Later planting resulted in a small decrease in oil content. Seed yields were increased with seeding rates going from 22 to 45 kg ha-1, which corresponded to plant populations > 300 plants m-2, with no increases thereafter. Increases in seeding rates always reduced the number of bolls plant-1 with little effect on seeds boll-1. Seeding rate had no effect on seed oil quantity and quality and maturity. A seed yield increase was observed with nitrogen when going from 66 to 100% of the recommended rate with no increases past 100%. Adding nitrogen resulted in a small drop in seed oil content. The seeding date × nitrogen rate interaction revealed a lack of response to nitrogen with the later planting date beyond 66% of the recommended N rate, suggesting reduced nitrogen rates with later plantings are possible. The absence of a site-year by seeding date by nitrogen rate interaction implies that findings of this study can be applied to a wide geographical area. In conclusion, attention needs to be given to seeding rates to target plant density > 300 plants m-2. Even with the high seeding rates, the target plant population was achieved only 60 and 73% of the time for the early and late planting, respectively. Using soil test recommendations for nitrogen will maximize seed yields under most situations. Best agronomic practices to maximize seed yield were found to maintain adequate seed oil quality and quantity. Key words: Linum usitatissimum L., nitrogen rate, seeding rate, seeding date, cultivar

scholarly journals Effect of sulphur on the seed yield and oil content of sesame (Sesamum indicum L.)

2019 ◽  
Vol 17 (1) ◽  
pp. 33-38
Author(s):  
Swapan Kumar Paul ◽  
Mosa Morsheda Khatun ◽  
Md Abdur Rahman Sarkar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Oil Content ◽  
Dry Matter Production ◽  
Production Plant ◽  
Matter Production ◽  
Stover Yield ◽  
Number Of Seeds ◽  
Number Of Branches

Sulphur is a component of plant amino acids, proteins, vitamins, and enzyme structures which influence the productivity of oil seed and total oil content. The experiment was conducted to find out the effect of sulphur on the seed yield and oil content of sesame in Bangladesh. The experiment comprised three varieties of sesame viz. Binatil-2, Binatil-3 and BARI Til-4 and six levels of sulphur (S) viz. 0, 10, 20, 30, 40 and 50 kg S ha–1. The experiment was laid out in a randomized complete block design with three replications. Dry matter production, crop characters, yield components, seed yield and oil content were significantly influenced by variety, level of sulphur and their interaction. The highest dry matter production plant–1 at 50 DAS (17.56 g), plant height (101.3 cm), number of branches plant–1 (3.66),  number of pods plant-1 (41.56), number of seeds pod-1 (58.83),  seed yield    (747.2 kg ha-1), stover yield (2243.0 kg ha–1) and oil content (40.03%) were obtained in BARI Til-4 while the corresponding lowest values of all parameters were recorded in Binatil-2. In case of sulphur application, the highest dry matter production plant–1 at 50 DAS (20.81 g), plant height (109.7 cm), number of branches plant–1 (3.87),  number of pods plant–1 (46.13),  number of seeds pod-1 (56.67),  seed yield (800.0 kg ha–1), stover yield (2787 kg ha–1 ) and oil content (43.97%) were obtained when crop was fertilized with 30 kg S ha–1 while the lowest seed yield (502.2 kg ha–1), stover yield (1550.0 kg ha–1) and oil content (32.80%) were obtained in control (0 kg S ha–1). BARI Til-4 fertilized with 30 kg S ha–1 produced the highest dry matter plant–1 at 50 DAS (24.80 g), number of pods plant–1 (51.13), seeds pod–1 (62.0) and seed yield (1011.0 kg ha–1). The highest oil content (43.97%) was also recorded in BARI Til-4 fertilized with 30 kg S ha–1, which was as good as that of BARI Til-4 fertilized with 40 kg S ha–1. Therefore, BARI Til-4 fertilized with 30 kg S ha–1 can be considered as a promising practice in respect of seed yield and oil content of sesame in Bangladesh. J. Bangladesh Agril. Univ. 17(1): 33–38, March 2019

scholarly journals Yield, Antioxidant Components, Oil Content, and Composition of Onion Seeds Are Influenced by Planting Time and Density

Plants ◽  
2019 ◽  
Vol 8 (8) ◽  
pp. 293 ◽  
Author(s):  
Carmine Amalfitano ◽  
Nadezhda A. Golubkina ◽  
Laura Del Vacchio ◽  
Giuseppe Russo ◽  
Mario Cannoniero ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Leaf Area ◽  
Seed Yield ◽  
Oil Content ◽  
Seed Oil ◽  
Density Increase ◽  
Area Index ◽  
Planting Time ◽  
Plant Leaf ◽  
Crop Cycle

Research was carried out on onion landrace (Ramata di Montoro) for seed production in southern Italy, with the aim to evaluate the effects on yield and quality of four bulb planting times in factorial combination with four densities, using a split plot design with three replicates. The number of flower stalks per plant, their height and diameter, and the inflorescence diameter decreased with the bulb planting delay and density increase. The highest plant leaf area and LAI (leaf area index), seed yield, number, and mean weight were recorded with the earliest planting time, with the lowest bulb density eliciting the highest plant leaf area but the lowest LAI and seed yield per hectare. The ratio between seeds and inflorescence weight, and seed germinability, decreased with the planting delay and density increase. Seed oil, protein, and antioxidant content (polyphenols and selenium) were highest with the last crop cycle. The polyunsaturated fatty acids, predominant in oil, increased with planting time delay, whereas the monounsaturated fatty acids decreased. Linoleic, oleic, and palmitic acid prevailed among polyunsaturated, monounsaturated, and saturated fatty acids, respectively. Planting from 20 December to 10 January with 3.3 cold-stored bulbs per m2 was the most effective combination in terms of seed yield per hectare, whereas seed oil content and quality were the best, with the last crop cycle starting on 21 February, independent of bulb density.

scholarly journals Discriminant function analysis for opium and seed yield in opium poppy (Papaver somniferum L.)

Genetika ◽  
2008 ◽  
Vol 40 (2) ◽  
pp. 109-120
Author(s):  
H.K. Yadav ◽  
S. Shukla ◽  
S.P. Singh
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Function Analysis ◽  
Positive Association ◽  
Papaver Somniferum ◽  
Yield Component ◽  
Opium Poppy ◽  
Dual Purpose ◽  
Single Character ◽  
Selection Indices

Opium poppy (Papaver somniferum L.) is an important medicinal plant of pharmacopoel uses. Opium latex and its derivatives are used in different medicines as analgesic, narcotic, sedative, sudorific, hyponitic, antispasmodic, ant diarrhea and cough etc. Genetic improvement in opium and seed yield, component breeding is important and selection based on multiple characters is more beneficial in developing desired plant types. Therefore the present study was made on group of 22 strains of opium poppy to find out variability and suitable selection indices for opium and seed yield. Heritability in broad sense was high for capsule weight/plant, plant height, capsule length, stem diameter and opium yield. The discriminant functions based on single character were less efficient while on the basis of combination it was in general more efficient. The comparison of different functions revealed that capsule weight/plant, capsule length, plant height are major yield component and thus practicing selection for attainment of high opium and seed yield lines, maximum weight age could be given to these characters. The positive association of opium yield and seed yield suggested that by adopting suitable component breeding and selection, a dual-purpose variety (opium and seed yield) may be developed.

scholarly journals Effects of sulphur on the yield, yield component characters and oil content of oilseed rape

2021 ◽  
Vol 66 (1) ◽  
pp. 17-25
Author(s):  
Valiollah Rameeh ◽  
Maryam Niakan ◽  
Mohammad Mohammadi
Keyword(s):  
Brassica Napus ◽  
Plant Height ◽  
Oilseed Rape ◽  
Seed Yield ◽  
Oil Content ◽  
Statistical Difference ◽  
Mean Value ◽  
Yield Component ◽  
Brassica Napus L ◽  
Significant Statistical Difference

The effects of four sulphur levels: S0, S1, S2 and S3, including 0, 12, 24 and 36 kg S ha-1, respectively, along with 115 kg N ha-1 were studied on yield-related traits of oilseed rape (Brassica napus L.). The significant variance of treatments was determined for plant height, yield component characters, seed yield and oil content. The sulphur application significantly increased most of the traits compared to the S0 level. The S3 (36 kg S ha-1) treatment led to the highest mean value of plant height (132 cm) which was classified with S2 (24 kg S ha-1) in the same statistical group. Sulphur had an increasing effect on pods per plant, and it ranged from 92 to 196 for S0 and S3 applications, respectively. S0 and S1 with 92 and 121 pods per plant were grouped in the same statistical group. In addition, S2, and S3 with 165 and 196 pods per plant showed no significant statistical difference. The sulphur application significantly increased seed yield compared to control (S0 level), and it ranged from 2744 to 3215 kg ha-1 in S0 and S3, respectively. The average oil contents of 45.69, 46.96, 47.46 and 49.53 % were detected for 0, 12, 24 and 36 kg S ha-1, respectively.

EFFECT OF PLANT DENSITY ON THE AGRONOMIC PERFORMANCE OF SUNFLOWER ON DRYLAND

1984 ◽  
Vol 64 (3) ◽  
pp. 599-605 ◽  
Author(s):  
N. W. HOLT ◽  
S. J. CAMPBELL
Keyword(s):  
Helianthus Annuus ◽  
Seed Weight ◽  
Oil Content ◽  
Seed Oil ◽  
Plant Density ◽  
Agronomic Traits ◽  
Agronomic Performance ◽  
Head Diameter ◽  
Helianthus Annuus L ◽  
Days To Maturity

This study investigated the influence of plant density on several agronomic traits of four sunflower (Helianthus annuus L.) cultivars grown at Indian Head and Saskatoon, Saskatchewan in the semiarid prairies. At populations of 40 000–85 000 plants∙ha−1, plant density had no significant effect on seed yield. The increase in percentage oil content with increase in plant density (44.3–45.6%) was small but significant. As plant density was increased, days to flower, height and test weight increased while days to maturity, head diameter and average seed weight decreased. Cultivars × density interactions were generally not significant. Environment (five location-years) had a significant effect on all variables, and environments × cultivar interactions were significant for most of these. Results of this experiment indicated that testing of sunflower lines at several locations in the growing area would be necessary for best assessment but one plant density, suitable to that area, could be used.Key words: Sunflower, plant density, seed, oil, seed size, Helianthus annuus L.

Eldorado summer turnip rape

1993 ◽  
Vol 73 (1) ◽  
pp. 185-186
Author(s):  
D. F. Degenhardt ◽  
G. R. Stringam ◽  
Z. P. Kondra
Keyword(s):  
Brassica Rapa ◽  
Seed Yield ◽  
Oil Content ◽  
Seed Oil ◽  
Glucosinolate Content ◽  
Western Canada ◽  
Seed Oil Content ◽  
Turnip Rape ◽  
Cultivar Description ◽  
Canola Quality

Eldorado summer rape (Brassica rapa L.) is a canola-quality cultivar with a seed yield similar to that of Tobin. The seed oil content of Eldorado is significantly higher and its meal glucosinolate content is significantly lower than Tobin. Eldorado is well adapted to the B. rapa-growing areas of western Canada. Keywords: Turnip rape (summer), cultivar description

Genetic variability in Indian mustard (Brassica juncea L. Czern and Coss)

2016 ◽  
Vol 1 (01) ◽  
pp. 30-34
Author(s):  
R. K. Gupta ◽  
V. K. Dwivedi
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Oil Content ◽  
Indian Mustard ◽  
Mean Value ◽  
Mean Values ◽  
Quantitative Characters ◽  
Biological Yield ◽  
The Mean

The data were recorded on five random selected plants for 12 quantitative characters and statistical analyzed. The analysis of variance for all the twelve characters is showed the mean square due to genotypes was highly significant. The mean values of various characters like days to 50 per cent flowering were recorded maximum for genotype IC560719 and Pusa Karishma (84.00 days)with mean 69.08 days The maximum days to 75% maturity were observed in IC-560700 genotype (142.00 days) with a mean of 135.07 days. The plant height highest recorded in the genotype IC-560696 (217.60 cm) with mean of 188.14 cm. The maximum number of primary branches per plant (16.47) was recorded in the genotype NPJ-113 with mean of 10.13. The genotype NPJ-113 produced maximum number of secondary branches per plant (35.47) with mean of 19.78. The maximum length of siliqua was recorded for Kranti (7.03) with mean of 5.24cm. The maximum number of seeds per siliqua was recorded in Kranti genotype (19.13) with mean value 14.91. The maximum 1000-seed weight recorded 5.57g for Pusa Jai Kisan with mean wt. 3.96 g. Pusa Mustard-21 produced highest biological yield (191.13g) with mean 79.00g. The genotype Pusa Jagannath had maximum harvest index (30.98%) with mean value 23.87%. The oil content in mustard maximum in 42.00 % were recorded in Pusa Agrani with mean oil content was 39.16 percent. The genotype Pusa Mustard-21 showed highest seed yield per plant (47.00g) with a mean seed yield of 18.58. The higher heritability estimates in broad sense for biological yield per plant (99.6%), number of primary branches per plant (91.4%), number of secondary branches per plant (98.4) plant height (99.2%), 1000-seed weight (99.4%) and days to 50 per cent flowering (98.5). Expected genetic advance at 5% selection intensity was recorded higher for biological yield per plant (71.60) and number secondary branches per plant (10.87).

Sign in / Sign up

Export Citation Format

Share Document