Genetic variability in Indian mustard (Brassica juncea L. Czern and Coss)

2016 ◽  
Vol 1 (01) ◽  
pp. 30-34
Author(s):  
R. K. Gupta ◽  
V. K. Dwivedi
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Oil Content ◽  
Indian Mustard ◽  
Mean Value ◽  
Mean Values ◽  
Quantitative Characters ◽  
Biological Yield ◽  
The Mean

The data were recorded on five random selected plants for 12 quantitative characters and statistical analyzed. The analysis of variance for all the twelve characters is showed the mean square due to genotypes was highly significant. The mean values of various characters like days to 50 per cent flowering were recorded maximum for genotype IC560719 and Pusa Karishma (84.00 days)with mean 69.08 days The maximum days to 75% maturity were observed in IC-560700 genotype (142.00 days) with a mean of 135.07 days. The plant height highest recorded in the genotype IC-560696 (217.60 cm) with mean of 188.14 cm. The maximum number of primary branches per plant (16.47) was recorded in the genotype NPJ-113 with mean of 10.13. The genotype NPJ-113 produced maximum number of secondary branches per plant (35.47) with mean of 19.78. The maximum length of siliqua was recorded for Kranti (7.03) with mean of 5.24cm. The maximum number of seeds per siliqua was recorded in Kranti genotype (19.13) with mean value 14.91. The maximum 1000-seed weight recorded 5.57g for Pusa Jai Kisan with mean wt. 3.96 g. Pusa Mustard-21 produced highest biological yield (191.13g) with mean 79.00g. The genotype Pusa Jagannath had maximum harvest index (30.98%) with mean value 23.87%. The oil content in mustard maximum in 42.00 % were recorded in Pusa Agrani with mean oil content was 39.16 percent. The genotype Pusa Mustard-21 showed highest seed yield per plant (47.00g) with a mean seed yield of 18.58. The higher heritability estimates in broad sense for biological yield per plant (99.6%), number of primary branches per plant (91.4%), number of secondary branches per plant (98.4) plant height (99.2%), 1000-seed weight (99.4%) and days to 50 per cent flowering (98.5). Expected genetic advance at 5% selection intensity was recorded higher for biological yield per plant (71.60) and number secondary branches per plant (10.87).

Mean performance, range and analysis of variance in Indian mustard (Brassica juncea L. Czern and Coss)

2019 ◽  
Vol 4 (01) ◽  
pp. 34-40
Author(s):  
Amit Tomar ◽  
Manish Kumar Srivastava ◽  
Mahak Singh
Keyword(s):  
Analysis Of Variance ◽  
Seed Yield ◽  
Seed Weight ◽  
Oil Content ◽  
Indian Mustard ◽  
Flower Number ◽  
Mean Values ◽  
Days To Maturity ◽  
The Mean ◽  
Number Of Seeds

The analysis of variance based on mean values of 10 characters namely, day to flower, number of primary branches per plant, number of secondary branches per plant, days to maturity, plant height (cm), number of siliquae per plant, number of seeds per siliquae, 1000-seed weight (g), oil content (%) and seed yield per plant (g) were studied for testing the significance of differences among the treatments. The mean sum of squares for all the characters. Highly significant differences were recorded among all the treatments for all the 10 characters except number of primary branches per plant, number of secondary branches per plant, days to maturity and oil content.

STUDY OF EFFECT OF EMS, MMS AND GR ON YIELD CONTRIBUTING TRAITS IN URDBEAN, VIGNA MUNGO

2017 ◽  
Vol 23 (1) ◽  
Author(s):  
A. B. SAGADE
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Inhibitory Effect ◽  
Individual Plant ◽  
Mean Values ◽  
Methane Sulphonate ◽  
Pod Length ◽  
100 Seed Weight ◽  
Number Of Seeds

The study of the effect of three well known mutagens, ethyl methane sulphonate (EMS), methyl methane sulphonate (MMS) and gamma rays (GR) on the yield contributing traits of the urdbean variety TPU-4 were carried out in the M3 generation. Effect of selected mutagenic treatments/doses of EMS (0.02, 0.03 and 0.04 M), MMS (0.0025, 0.05 and 0.01 M) and (GR) (30, 40 and 50 KR) on different yield contributing traits like plant height, plant spread, number of pods per plant, pod length, number of seeds per pod, seed yield per plant and 100 seed weight were analyzed in the M3 populations of the variety TPU-4. Seeds of M2 plants and control were harvested separately and sown to raise M3 population.. Genetic variabilty in the mutagen administered M3 progeny of the urdbean variety TPU-4 was analyzed by employing statistical methods. Data on mean values and shift in the mean of seven quantitative traits was evaluated on individual plant basis. The experimental findings revealed that concentrations / dose of the all these mutagens showed inhibitory effect on plant height, number of pods per plant, pod length and number of seeds per pod. Lower concentrations of mutagens exerted a promotory effect on plant spread, 100 seed weight and seed yield per plant while higher concentrations of these mutagens inhibited them to different extent.

scholarly journals Genetic Analysis of Some Genotypes of Indian Mustard (Brassica juncea L.) for Yield and Yield Attributing Traits

2021 ◽  
pp. 51-60
Author(s):  
A. M. Pradhan ◽  
M. Roy Choudhury ◽  
A. Sawarkar ◽  
S. Das
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Indian Mustard ◽  
Correlation Study ◽  
Biotic And Abiotic Stress ◽  
Randomized Block Design ◽  
Additive Gene ◽  
Positive Direct

The current investigation was carried out to examine the selection criteria for yield improvement in selected genotypes of Indian mustard. Twenty-four genotypes of Indian mustard were evaluated for seed yield and yield attributing characters with randomized block design with three replications. The analysis of variance showed significant differences among all the 24 genotypes against all the characters. The phenotypic and genotypic coefficient of variation were higher for most of the traits like seed yield per plant, number of secondary branches per plant and number of siliquae per plant. High heritability coupled with high genetic advance in percent of mean was registered for number of siliquae per plant, number of primary and secondary branches per plant, plant height, 1000 seed weight, siliqua length per plant and seed yield per plant suggesting predominant role of additive gene action for expression of these traits. The correlation study revealed that seed yield per plant was positively and significantly correlated with number of primary and secondary branches per plant, number of siliquae per plant, siliqua length per plant and 1000 seed weight at both phenotypic and genotypic level. The traits namely, number of secondary branches per plant recorded as highest positive direct effect followed by number of seeds per siliqua, number of siliquae per plant and plant height. Therefore, they may be carried out further evaluation in multilocational trials, biotic and abiotic stress like environmental conditions to check their stability and adaptability.

scholarly journals Effects of sulphur on the yield, yield component characters and oil content of oilseed rape

2021 ◽  
Vol 66 (1) ◽  
pp. 17-25
Author(s):  
Valiollah Rameeh ◽  
Maryam Niakan ◽  
Mohammad Mohammadi
Keyword(s):  
Brassica Napus ◽  
Plant Height ◽  
Oilseed Rape ◽  
Seed Yield ◽  
Oil Content ◽  
Statistical Difference ◽  
Mean Value ◽  
Yield Component ◽  
Brassica Napus L ◽  
Significant Statistical Difference

The effects of four sulphur levels: S0, S1, S2 and S3, including 0, 12, 24 and 36 kg S ha-1, respectively, along with 115 kg N ha-1 were studied on yield-related traits of oilseed rape (Brassica napus L.). The significant variance of treatments was determined for plant height, yield component characters, seed yield and oil content. The sulphur application significantly increased most of the traits compared to the S0 level. The S3 (36 kg S ha-1) treatment led to the highest mean value of plant height (132 cm) which was classified with S2 (24 kg S ha-1) in the same statistical group. Sulphur had an increasing effect on pods per plant, and it ranged from 92 to 196 for S0 and S3 applications, respectively. S0 and S1 with 92 and 121 pods per plant were grouped in the same statistical group. In addition, S2, and S3 with 165 and 196 pods per plant showed no significant statistical difference. The sulphur application significantly increased seed yield compared to control (S0 level), and it ranged from 2744 to 3215 kg ha-1 in S0 and S3, respectively. The average oil contents of 45.69, 46.96, 47.46 and 49.53 % were detected for 0, 12, 24 and 36 kg S ha-1, respectively.

Association among genetic parameters in Indian mustard (Brassica juncea L. Czern and Coss.)

2018 ◽  
Vol 3 (01) ◽  
pp. 11-15
Author(s):  
Vipin Kumar Malik ◽  
Shiv Kumar Singh ◽  
Vijay Kumar ◽  
Norang Pal Singh ◽  
Ankit Malik ◽  
...  
Keyword(s):  
Brassica Juncea ◽  
Seed Yield ◽  
Seed Weight ◽  
Harvest Index ◽  
Indian Mustard ◽  
Flowering Plant ◽  
Genetic Advance ◽  
Gene Effects ◽  
Plant Seed ◽  
Biological Yield

The considerable amount of genetic variability on the basis of GCV and PCV estimates for the traits; days to 50% flowering, numbers of primary and secondary branches per plant, length of siliqua, 1000-seed weight, seed yield per plant, biological yield per plant and harvest index were found in thirty five genotypes of Indian mustard (Brassica juncea L. Czern and Coss). Heritability and genetic advance were higher for days to 50% flowering, plant height and biological yield per plant. Although, number of secondary branches per plant, seed yield per plant and harvest index had moderately high heritability with moderate genetic advance indicating additive gene effects and selection pressure could be applied on them for yield improvement leads to fast genetic improvement of the materials. Days to 75% maturity, length of siliqua, 1000-seed weight and oil content had low heritability indicating that these traits were under the influence of environmental factors and selection on the basis of these traits could not be effective.

Genetic components analysis in Indian mustard (Brassica juncea L. Czern and Coss) under Saharanpur districts

2019 ◽  
Vol 4 (01) ◽  
pp. 66-70
Author(s):  
Amit Tomar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Oil Content ◽  
Indian Mustard ◽  
Test Weight ◽  
Plant Oil ◽  
Plant Seed ◽  
Days To Flowering ◽  
Genetic Components ◽  
Days To Maturity

Regression coefficient ‘b1’ deviated from unity for length of main raceme, Number of secondary branches per plant, test weight, oil content, Number of siliquae per plant, seed yield per plant. The estimates of additive components ( Dˆ ), dominance components ( 1 Hˆ and 2Hˆ ) were highly significant for days to flowering, days to maturity, plant height, length of main raceme, number of siliquae per plant, number of secondary branches per plant, oil content, test weight and seed yield per plant .All the estimates of Fˆ (mean of Fr value, where Fr is the proportion of negatives effects of Genes in rth parents) was positive and significant number of siliquae per plant, days to flowering, days to maturity, plant height and except for which is highly significant whereas days to maturity was negative and significant. The estimates of 2 hˆ were positive and highly significant for days to flowering, days to maturity, plant height, length of main raceme, oil content, test weight and seed yield per plant. The estimates of mean degree of dominance ( 1Hˆ / Dˆ ) 0.5 were more than unity for length of main raceme, number of secondary branches per plant, oil content, test weight and seed yield per plant.

Genetic divergence analysis in chickpea germplasm

2018 ◽  
Author(s):  
Renuka Shivwanshi ◽  
Anita Babbar
Keyword(s):  
Seed Yield ◽  
Genetic Divergence ◽  
Seed Weight ◽  
Quantitative Traits ◽  
Mean Values ◽  
Cluster Distance ◽  
Biological Yield ◽  
Per Se ◽  
Total Divergence ◽  
100 Seed Weight

A total of 434 germplasm lines of chickpea were assessed for 13 quantitative traits during rabi 2015-16 at JNKVV, Jabalpur. Genotypes were grouped into fourteen clusters. Clusters II and cluster XIV and cluster XII and cluster XIV, had maximum inter cluster distance. The characters viz.,effective pods per plant followed by biological yield per plant, plant height and 100-seed weight were main contribution to total divergence. Cluster XIV and cluster XIII had highest mean values for maximum number of characters. Based on the result IC 83812, EC 198729, EC 490027, IC 53245, IC 83827and IC 83889 are recommended for hybridization, as these genotypes showed good per se performance for seed yield and belong to the highly diverse clusters.

scholarly journals Character Association and Path Coefficient Analysis in Indian Mustard (Brassica juncea L.)

2022 ◽  
Author(s):  
V.V. Singh ◽  
Laxman Prashad ◽  
Balbeer . ◽  
H.K. Sharma ◽  
M.L. Meena ◽  
...  
Keyword(s):  
Direct Effect ◽  
Seed Yield ◽  
Harvest Index ◽  
Oil Content ◽  
Indian Mustard ◽  
Test Weight ◽  
Path Coefficient ◽  
Path Coefficient Analysis ◽  
Zone Length ◽  
Biological Yield

Background: Correlation analysis informs us about the relative importance of the breeding traits and quite useful for plant breeders to formulate their breeding and selection strategies. Path coefficient analysis splits the correlation coefficient into the measures of indirect and direct effect. It identifies the indirect and direct influence of different autonomous genotype on a dependent trait. Present study aimed to determine major seed contributing components affecting seed yield and also to know the relationship among these components. Methods: Present investigation was carried out on 147 advanced breeding lines to know the correlations and path coefficient for 12 yield and yield contributing traits. The material was evaluated in augmented block design with 07 blocks, each block having 21 lines. A set of three check varieties were repeated in each block. Observations were recorded on number of primary branches/plant, number of secondary branches/plant, plant height (cm), silique/plant, fruiting zone length (cm), main shoot length (cm), number of seeds/siliquae, siliquae length (cm), biological yield/plant (g), seed yield/plant (g), harvest index and test weight. Result: The seed yield per plant showed positive and significant correlation with primary branches per plant (0.273), secondary branches per plant (0.280), siliquae per plant (0.627), biological yield per plant (0.744), harvest index (0.188), test weight (0.212) and oil content (0.225). Biological yield per plant (0.5747) had maximum direct effect on seed yield per plant followed by siliquae per plant (0.2438), harvest index (0.127), oil content (0.118) and test weight. These characters have positive and significant association with seed yield per plant. The study thus indicated that biological yield per plant, siliquae per plant, harvest index and test weight are the important characters which should be considered in selection programme in Indian mustard.

scholarly journals Combining Ability And Nature of Gene Effects Controlling Seed Yield And Its Component Traits In Alien Cytoplasm Based Hybrids In Sunflower (Helianthus Annuus L.)

2021 ◽  
Author(s):  
Manish Sharma ◽  
Y.G.SHADAKSHARI
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Oil Content ◽  
Stem Diameter ◽  
Gene Effects ◽  
Seed Filling ◽  
Volume Weight ◽  
Component Traits ◽  
The Mean ◽  
100 Seed Weight

Abstract The present research aimed to study gene effects for seed yield and its component traits in sunflower hybrids having diverse cytosterile sources from Helianthus annuus and H. argophyllus. Five lines and ten testers were crossed in a line x tester mating design to develop 50 F1 hybrids for genetic analysis. The analysis of variance revealed significant differences among the traits studied. Seasonal variation was found significant for all the traits except stem diameter, volume weight and seed filling percentage. The mean squares of lines and testers from crosses both determine the GCA were also significant for most of the traits which revealed the prevalence of additive variances and additive gene action. The mean squares of lines x tester interactions were also significant for all the traits considered. The significance of lines x tester interactions indicated that SCA is also important in the expression of traits and demonstrated the value of non-additive variances and dominant genes controlling the various traits. Among the diverse cytosterile lines, ARG-6-3-1-4 was identified as the best general combiner for stem diameter, volume weight, seed yield, hull content, oil content and oil yield. While, the line ARG-2-1-2 was best general combiner for days to 50 per cent flowering, head diameter, 100 seed weight and seed filling percentage. The tester M17-R was observed to be best general combiner for earliness and volume weight, while RHA 93 was the best general combiner for plant height, seed yield and oil content. The best cross combinations; MUT-2-8-3-2 x GKVK 3 was found to be good specific combiner for stem diameter, 100 seed weight, seed yield, seed filling percentage, oil content and oil yield, while ARG-6-3-1-4 x GKVK 3 was good specific combiner for days to 50% flowering, plant height and 100 seed weight.

scholarly journals Effect of phosphorus on growth and yield of sesame

2019 ◽  
Vol 6 (2) ◽  
pp. 245-251
Author(s):  
Nushrat Jahan ◽  
ABM Shafiul Alam ◽  
Atiya Sharmin Mitu ◽  
Md Ahasan Habib ◽  
Md Sefaur Rahman
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Harvest Index ◽  
Block Design ◽  
Growth And Yield ◽  
Stover Yield ◽  
Biological Yield ◽  
Number Of Leaves ◽  
P Application

The present study was conducted at the Research farm of Sher-e-Bangla Agricultural University, Sher-e-Bangla Nagar, Dhaka, during March to June 2014 to examine the effect of Phosphorus on the growth and yield of Sesame. BARI Til-3 variety was used for the study. This experiment was consisted of single factor eg. phosphorus. There were three levels of phosphorus viz. (i) P0 (0 % P), (ii) P1 (20 % P) and (iii) P2 (30 % P) and the experiment was laid out in a Randomized Complete Block Design (RCBD) with six replications. Different levels of phosphorus showed significant effect on growth and yield of sesame. Individually phosphorus had significant effect on highest plant height, number of leaves plant-1, number of primary branches plant-1, number of secondary branches plant-1, number of capsule plant-1, number of seeds capsule-1, 1000 seed weight, seed yield and harvest index. The highest plant height of sesame (136.30 cm), the highest no leaves plant-1 of sesame (34.44), number of primary branches plant-1 (5.56), number of secondary branches plant-1 (7.61), number of capsule plant-1 (25.87), number of seed capsule-1 (70.47),1000 seed weight (3.54), Seed yield (1581.00 kg ha-1), Stover yield (3034.42 kg ha-1), biological yield (4615.76), harvest index (34.11%), oil content (43.92%) was recorded from P1. Again, the highest days to first flowering of sesame (31.67) was recorded from P1 (20 % P) but the highest days to maturity was (85.67) recorded from P2 (30% P). Application of P at different percentage is causing effect in growth and yield of sesame. Res. Agric., Livest. Fish.6(2): 245-251, August 2019

Sign in / Sign up

Export Citation Format

Share Document