Shear versus vortex-induced lift force on a rigid sphere at moderate Re

2002 ◽  
Vol 473 ◽  
pp. 379-388 ◽  
Author(s):  
P. BAGCHI ◽  
S. BALACHANDAR

The lift forces on rigid spheres entrained in a vortex and a linear shear flow are computed using a direct numerical simulation. The sphere Reynolds number is in the range 10 to 100. The lift coefficient in a vortex is shown to be nearly two orders of magnitude higher than that in a shear flow. The inviscid mechanism is shown to be inadequate to account for the enhanced lift force. The effect of free rotation of the sphere is also shown to be too small to account for the enhanced lift force. Flow structure around the sphere is studied to explain the generation of the strong lift force in a vortex.

1998 ◽  
Vol 368 ◽  
pp. 81-126 ◽  
Author(s):  
DOMINIQUE LEGENDRE ◽  
JACQUES MAGNAUDET

The three-dimensional flow around a spherical bubble moving steadily in a viscous linear shear flow is studied numerically by solving the full Navier–Stokes equations. The bubble surface is assumed to be clean so that the outer flow obeys a zero-shear-stress condition and does not induce any rotation of the bubble. The main goal of the present study is to provide a complete description of the lift force experienced by the bubble and of the mechanisms responsible for this force over a wide range of Reynolds number (0.1[les ]Re[les ]500, Re being based on the bubble diameter) and shear rate (0[les ]Sr[les ]1, Sr being the ratio between the velocity difference across the bubble and the relative velocity). For that purpose the structure of the flow field, the influence of the Reynolds number on the streamwise vorticity field and the distribution of the tangential velocities at the surface of the bubble are first studied in detail. It is shown that the latter distribution which plays a central role in the production of the lift force is dramatically dependent on viscous effects. The numerical results concerning the lift coefficient reveal very different behaviours at low and high Reynolds numbers. These two asymptotic regimes shed light on the respective roles played by the vorticity produced at the bubble surface and by that contained in the undisturbed flow. At low Reynolds number it is found that the lift coefficient depends strongly on both the Reynolds number and the shear rate. In contrast, for moderate to high Reynolds numbers these dependences are found to be very weak. The numerical values obtained for the lift coefficient agree very well with available asymptotic results in the low- and high-Reynolds-number limits. The range of validity of these asymptotic solutions is specified by varying the characteristic parameters of the problem and examining the corresponding evolution of the lift coefficient. The numerical results are also used for obtaining empirical correlations useful for practical calculations at finite Reynolds number. The transient behaviour of the lift force is then examined. It is found that, starting from the undisturbed flow, the value of the lift force at short time differs from its steady value, even when the Reynolds number is high, because the vorticity field needs a finite time to reach its steady distribution. This finding is confirmed by an analytical derivation of the initial value of the lift coefficient in an inviscid shear flow. Finally, a specific investigation of the evolution of the lift and drag coefficients with the shear rate at high Reynolds number is carried out. It is found that when the shear rate becomes large, i.e. Sr=O(1), a small but consistent decrease of the lift coefficient occurs while a very significant increase of the drag coefficient, essentially produced by the modifications of the pressure distribution, is observed. Some of the foregoing results are used to show that the well-known equality between the added mass coefficient and the lift coefficient holds only in the limit of weak shears and nearly steady flows.


2007 ◽  
Vol 570 ◽  
pp. 155-175 ◽  
Author(s):  
KEN-ICHI SUGIOKA ◽  
SATORU KOMORI

Drag and lift forces acting on a spherical water droplet in a homogeneous linear shear air flow were studied by means of a three-dimensional direct numerical simulation based on a marker and cell (MAC) method. The effects of the fluid shear rate and the particle (droplet) Reynolds number on drag and lift forces acting on a spherical droplet were compared with those on a rigid sphere. The results show that the drag coefficient on a spherical droplet in a linear shear flow increases with increasing the fluid shear rate. The difference in the drag coefficient between a spherical droplet and a rigid sphere in a linear shear flow never exceeds 4%. The lift force acting on a spherical droplet changes its sign from a positive to a negative value at a particle Reynolds number of Rep ≃ 50 in a linear shear flow and it acts from the high-speed side to the low-speed side for Rep ≥ 50. The behaviour of the lift coefficient on a spherical droplet is similar to that on a stationary rigid sphere and the change of sign is caused by the decrease of the pressure lift. The viscous lift on a spherical droplet is smaller than that on a rigid sphere at the same Rep, whereas the pressure lift becomes larger. These quantitative differences are caused by the flow inside a spherical droplet.


1999 ◽  
Vol 381 ◽  
pp. 63-87 ◽  
Author(s):  
EVGENY S. ASMOLOV

The inertial migration of a small rigid sphere translating parallel to the walls within a channel flow at large channel Reynolds numbers is investigated. The method of matched asymptotic expansions is used to solve the equations governing the disturbance flow past a particle at small particle Reynolds number and to evaluate the lift. Both neutrally and non-neutrally buoyant particles are considered. The wall-induced inertia is significant in the thin layers near the walls where the lift is close to that calculated for linear shear flow, bounded by a single wall. In the major portion of the flow, excluding near-wall layers, the wall effect can be neglected, and the outer flow past a sphere can be treated as unbounded parabolic shear flow. The effect of the curvature of the unperturbed velocity profile is significant, and the lift differs from the values corresponding to a linear shear flow even at large Reynolds numbers.


Author(s):  
Jason Gatewood ◽  
Zhi-Gang Feng

The presence of a wall near a rigid sphere is known to disturb the particle fore and aft flow field and thereby affect particle drag and lift. This effect has wide ranging implications in particulate flows such as the dynamics of blood cells in microvessels or the transport of particulates in channel and pipe flows. In this study, an Immersed Boundary Direct Numerical Simulation (IB-DNS) is used to predict the dynamics of a rigid spherical body in the presence of a wall at laminar flows. The wall effect is shown to be significant when the dimensionless ratio (L/D) of the particle diameter (D) to the wall distance (L) is less than 3, and when particle Reynolds number is less than 10. Based on the IB-DNS results, a correlation for the wall effect on drag coefficient is derived that can be used to predict the actual drag coefficient for rigid spheres under the influence of a wall for L/D between 0.75 and 3 and Reynolds number between 0.18 and 10. The data underlying the correlation developed herein is validated by comparison to published experimental, numerical, and analytical correlations. The application of the IB-DNS method to study the wall effect is both novel and significant. It is novel in that such an application is not yet demonstrated. It is significant in that it; (1) utilizes a uniform Cartesian fluid mesh and (2) requires no sub domains of higher grid resolution in the wall gap.


1994 ◽  
Vol 263 ◽  
pp. 1-18 ◽  
Author(s):  
Pradeep Cherukat ◽  
John B. Mclaughlin

An expression which predicts the inertial lift, to lowest order, on a rigid sphere translating in a linear shear flow field near a flat infinite wall has been derived. This expression may be used when the wall lies within the inner region of the sphere's disturbance flow. It is valid even when the gap is small compared to the radius of the sphere. When the sphere is far from the wall, the lift force predicted by the present analysis converges to the value predicted by earlier analyses which consider the sphere as a point force or a force doublet singularity. The effect of rotation of the sphere on the lift has also been analysed.


2009 ◽  
Vol 629 ◽  
pp. 173-193 ◽  
Author(s):  
KEN-ICHI SUGIOKA ◽  
SATORU KOMORI

Drag and lift forces acting on a spherical gas bubble in a homogeneous linear shear flow were numerically investigated by means of a three-dimensional direct numerical simulation (DNS) based on a marker and cell (MAC) method. The effects of fluid shear rate and particle Reynolds number on drag and lift forces acting on a spherical gas bubble were compared with those on a spherical inviscid bubble. The results show that the drag force acting on a spherical air bubble in a linear shear flow increases with fluid shear rate of ambient flow. The behaviour of the lift force on a spherical air bubble is quite similar to that on a spherical inviscid bubble, but the effects of fluid shear rate on the lift force acting on an air bubble in the linear shear flow become bigger than that acting on an inviscid bubble in the particle Reynolds number region of 1≤Rep≤300. The lift coefficient on a spherical gas bubble approaches the lift coefficient on a spherical water droplet in the linear shear air-flow with increase in the internal gas viscosity.


1993 ◽  
Vol 246 ◽  
pp. 249-265 ◽  
Author(s):  
John B. McLaughlin

This paper presents a closed-form solution for the inertial lift force acting on a small rigid sphere that translates parallel to a flat wall in a linear shear flow. The results provide connections between results derived by other workers for various limiting cases. An analytical form for the lift force is derived in the limit of large separations. Some new results are presented for the disturbance flow created by a small rigid sphere translating through an unbounded linear shear flow.


1974 ◽  
Vol 65 (2) ◽  
pp. 365-400 ◽  
Author(s):  
B. P. Ho ◽  
L. G. Leal

The familiar Segré-Silberberg effect of inertia-induced lateral migration of a neutrally buoyant rigid sphere in a Newtonian fluid is studied theoretically for simple shear flow and for two-dimensional Poiseuille flow. It is shown that the spheres reach a stable lateral equilibrium position independent of the initial position of release. For simple shear flow, this position is midway between the walls, whereas for Poiseuille flow, it is 0·6 of the channel half-width from the centre-line. Particle trajectories are calculated in both cases and compared with available experimental data. Implications for the measurement of the rheological properties of a dilute suspension of spheres are discussed.


1999 ◽  
Author(s):  
Gustavo C. Buscaglia ◽  
Hugo E. Ferrari ◽  
Pablo M. Carrica ◽  
Enzo A. Dari

Abstract An application of “cluster computing” in finite element CFD is reported, demonstrating the feasibility of solving relevant 3D problems on low-cost architectures (PC’s connected by fast Ethernet network). The main ingredients of our implementation are described. The results concern the lift force on a solid particle in simple shear flow. It is shown that, if the particle is allowed to rotate freely about its center, the self-established rotation significantly alters the lift coefficient. in particular, the lift force points away from a wall for any Re (≤ 100), while if the particle does not rotate the lift changes sign. Suitable estimates for the typical time involved in the angular acceleration of solid spherical particles are derived.


Sign in / Sign up

Export Citation Format

Share Document