The complete second-order diffraction solution for an axisymmetric body Part 2. Bichromatic incident waves and body motions

1990 ◽  
Vol 211 ◽  
pp. 557-593 ◽  
Author(s):  
Moo-Hyun Kim ◽  
Dick K. P. Yue
Keyword(s):  
Transfer Functions ◽  
Integral Equation Method ◽  
Axisymmetric Body ◽  
Second Order ◽  
Difference Frequency ◽  
Irregular Waves ◽  
Total Load ◽  
Frequency Wave ◽  
Order Diffraction ◽  
Incident Waves

In Part 1 (Kim & Yue 1989), we considered the second-order diffraction of a plane monochromatic incident wave by an axisymmetric body. A ring-source integral equation method in conjunction with a novel analytic free-surface integration in the entire local-wave-free domain was developed. To generalize the second-order theory to irregular waves, say described by a continuous spectrum, we consider in this paper the general second-order wave–body interactions in the presence of bichromatic incident waves and the resulting sum- and difference-frequency problems. For completeness, we also include the radiation problem and second-order motions of freely floating or elastically moored bodies. As in Part 1, the second-order sum- and difference-frequency potentials are obtained explicitly, revealing a number of interesting local behaviours of the second-order pressure. For illustration, the quadratic transfer functions (QTF's) for the sum- and difference-frequency wave excitation and body response obtained from the present complete theory are compared to those of existing approximation methods for a number of simple geometries. It is found that contributions from the second-order potentials, typically neglected, can dominate the total load in many cases.

Second-Order Difference-Frequency Loads on FPSOs by Full QTF and Relevant Approximations

2020 ◽  
Author(s):  
Espen Engebretsen ◽  
Zhiyuan Pan ◽  
Nuno Fonseca
Keyword(s):  
Near Field ◽  
Time Domain Analysis ◽  
Second Order ◽  
Difference Frequency ◽  
Irregular Waves ◽  
Mooring Line ◽  
Diffraction Radiation ◽  
Surface Integral ◽  
Order Difference ◽  
Order Diffraction

Abstract This paper investigates three different approximations of the full Quadratic Transfer Function (QTF) for calculating horizontal plane second-order difference-frequency loads on FPSOs, namely Newman’s approximation, full QTF without free surface integral and the white-noise approximation. Second-order excitation loads obtained from approximated QTFs are compared in frequency-domain with those obtained by the full QTFs computed from second-order diffraction/radiation analysis in WADAM. The comparison is performed for a new-build FPSO in a range of water depths and environmental combinations. The full QTFs from second-order diffraction/radiation analysis are further compared to empirical QTFs as identified from cross bi-spectral analysis of model test results in irregular waves. A mesh convergence study is presented for calculating full QTFs by the near-field approach in a second-order diffraction/radiation analysis. The importance of including viscous damping in heave, roll and pitch is illustrated for the mean wave-drift force in surge and sway. FPSO motions and mooring line tensions from fully-coupled time-domain analysis in OrcaFlex is compared when using approximated QTFs and full QTFs from second-order diffraction/radiation analysis.

Second-Order Low-Frequency Wave Forces on a SPM Offloading Tanker in Shallow Water

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
S. Ma ◽  
M. H. Kim ◽  
S. Shi
Keyword(s):  
Shallow Water ◽  
Transfer Functions ◽  
Low Frequency ◽  
Wave Force ◽  
Second Order ◽  
Irregular Waves ◽  
Mooring Line ◽  
Frequency Wave ◽  
Water Region ◽  
Shallow Water Region

This paper studies the influence of three different calculation methods of the second-order low-frequency (LF) wave-force quadratic transfer functions (QTFs) for a single point mooring (SPM) tanker system in relatively shallow water region. The multivessel-mooring hawser coupled dynamic analysis is used to simulate the floater relative motions and mooring and hawser tensions. Because the SPM tanker is deployed in shallow water region and the slowly varying drift motions are to be dominant in typical operational conditions, the accurate calculation of LF wave-force QTFs become important especially for mooring and hawser-tension prediction. The practically popular Newman’s approximation and another approximation excluding complicated free-surface integrals are used to calculate the LF QTFs on the offloading tanker and they are compared with the complete QTF results. Further comparison is carried out by calculating the resulting LF wave-force spectra and motion time histories and analyzing their impacts on hawser and mooring line tensions. Through the example studies, the limitation of the Newman’s approximation in the case of shallow water and longer period irregular waves is underscored.

Sum-and Difference-Frequency Wave Loads on a Body in Unidirectional Gaussian Seas

1991 ◽  
Vol 35 (02) ◽  
pp. 127-140 ◽  
Author(s):  
M. H. Kim ◽  
Dick K. P. Yue
Keyword(s):  
Volterra Series ◽  
Extreme Values ◽  
Large Body ◽  
Wave Force ◽  
Second Order ◽  
Difference Frequency ◽  
Approximation Methods ◽  
Wave Loads ◽  
Frequency Wave ◽  
Incident Waves

When nonlinear effects are included in the diffraction of waves by a large body, there are, at second order, interactions at the sums and differences of the component frequencies of the incident waves. In this paper, the complete deterministic and stochastic solutions of second-order (sum-and difference-frequency) wave loads in unidirectional Gaussian waves are considered. The deterministic result, namely the wave force quadratic transfer function (QTF) in bichromatic incident waves, is complete in the context of second-order diffraction theory in that all the relevant components including those due to the exact second-order potentials are obtained. Statistical properties of second-order wave excitations are then investigated using the QTF results and a two-term Volterra series model. For illustration, the exact second-order force spectra and probability distributions for the simple geometry of a truncated vertical cylinder are obtained and compared with those based on a number of existing approximation methods. It is found that second-order exciting force variances and probability of extreme values may be significantly underestimated by existing approximation methods.

Analysis on the Performance of Deckwetness of Sandglass-type and Cylindrical Floating Bodies

2016 ◽  
Vol 60 (03) ◽  
pp. 145-155
Author(s):  
Ya-zhen Du ◽  
Wen-hua Wang ◽  
Lin-lin Wang ◽  
Yu-xin Yao ◽  
Hao Gao ◽  
...  
Keyword(s):  
Transfer Functions ◽  
Linear Response Theory ◽  
Second Order ◽  
Irregular Waves ◽  
Wave Loads ◽  
Floating Bodies ◽  
Drift Motion ◽  
First Order ◽  
Series Of Experiments ◽  
Deck Wetness

In this paper, the influence of the second-order slowly varying loads on the estimation of deck wetness is studied. A series of experiments related to classic cylindrical and new sandglass-type Floating Production, Storage, and Offloading Unit (FPSO) models are conducted. Due to the distinctive configuration design, the sand glass type FPSO model exhibits more excellent deck wetness performance than the cylindrical one in irregular waves. Based on wave potential theory, the first-order wave loads and the full quadratic transfer functions of second-order slowly varying loads are obtained by the frequency-domain numerical boundary element method. On this basis, the traditional spectral analysis only accounting for the first-order wave loads and time-domain numerical simulation considering both the first-order wave loads and nonlinear second-order slowly varying wave loads are employed to predict the numbers of occurrence of deck wetness per hour of the two floating models, respectively. By comparing the results of the two methods with experimental data, the shortcomings of traditional method based on linear response theory emerge and it is of great significance to consider the second-order slowly drift motion response in the analysis of deck wetness of the new sandglass-type FPSO.

Nonlinear Wave Disturbance Around a Vertical Circular Column

2002 ◽  
Author(s):  
C. T. Stansberg ◽  
H. Braaten
Keyword(s):  
Linear Prediction ◽  
Harmonic Component ◽  
Nonlinear Effects ◽  
Second Order ◽  
Wave Disturbance ◽  
Difference Frequency ◽  
Irregular Waves ◽  
Order Effects ◽  
Sum Frequency ◽  
Circular Column

The wave disturbance close to vertical columns is analysed. In particular, the deviations from linear predictions are investigated, by experimental as well as by numerical methods. Thus a second-order numerical diffraction model is established by means of a diffraction analysis code (WAMIT) and compared to model tests with a single, fixed column with diameter 16m. Tests in regular, bi-chromatic as well as irregular waves are run. Significant nonlinear effects are observed, especially in steep waves, with the maximum elevation in front of the column increasing from 11.5m in a linear prediction to around 19m, in a 12s regular wave with 22m wave height. The main nonlinear effects in front of the column are identified as second-order sum-frequency and difference-frequency terms, plus a significant nonlinear increase in the first harmonic component. The WAMIT prediction of the second-order effects agrees fairly well with the measurements, although with some overprediction and underprediction, respectively, of the sum-frequency and difference-frequency (LF and mean set-up) terms in the steepest waves. For the underprediction of the first harmonic, however, a theory beyond second order is required.

Experimental Investigation of the First and Second Order Wave Exciting Forces on a Restrained Body in Long Crested Irregular Waves

2011 ◽  
Author(s):  
Joa˜o Pessoa ◽  
Nuno Fonseca ◽  
Suresh Rajendran ◽  
C. Guedes Soares
Keyword(s):  
Experimental Investigation ◽  
Transfer Functions ◽  
Vertical Cylinder ◽  
Vertical Axis ◽  
Second Order ◽  
The Body ◽  
Irregular Waves ◽  
Numerical Predictions ◽  
Exciting Forces ◽  
Wave Exciting Forces

The paper presents an experimental investigation of the first order and second order wave exciting forces acting on a body of simple geometry subjected to long crested irregular waves. The body is axis-symmetric about the vertical axis, like a vertical cylinder with a rounded bottom, and it is restrained from moving. Second order spectral analysis is applied to obtain the linear spectra, coherence spectra and cross bi-spectra of both the incident wave elevation and of the horizontal and vertical wave exciting forces. Then the linear and quadratic transfer functions (QTF) of the exciting forces are obtained. The QTF obtained from the analysis of irregular wave measurements are compared with results from experiments in bi-chromatic waves and with numerical predictions from a second order potential flow code.

Influence of Second-Order Difference-Frequency Wave Loads on the Floating Wind-Wave Hybrid Platform

2017 ◽  
Author(s):  
Hyebin Lee ◽  
Yoon Hyeok Bae ◽  
Kyong-Hwan Kim ◽  
Sewan Park ◽  
Keyyong Hong
Keyword(s):  
Wind Wave ◽  
Computational Effort ◽  
Second Order ◽  
Difference Frequency ◽  
Linear Wave ◽  
Wave Loads ◽  
Wave Load ◽  
Frequency Wave ◽  
Order Difference ◽  
Hybrid Platform

A wind-wave hybrid power generation system is a floating offshore energy platform which is equipped with a number of wind turbines and wave energy converters (WECs) to harvest energy from various resources. This wind-wave hybrid platform is moored by eight catenary lines to keep its position against wind-wave-current environment. In most cases, the resonant frequency of horizontal motion of moored platform is very low, so a resonance is hardly seen by numerical simulation with linear wave assumptions. However, the incident waves with different frequency components are accompanied by sum and difference frequency loads due to the nonlinearity of the waves. Typically, the magnitude of the second-order wave loads are small and negligible, but once the second-order wave loads excite the platform at its natural frequency, the resonance can take place, which results in adverse effects on the platform. In this paper, the second-order difference frequency wave load on the wind-wave hybrid platform is numerically assessed and time domain simulation by coupled platform-mooring dynamic analysis is carried out. As a result, the horizontal motions of the platform was highly excited and the increased motions led higher top tension of the mooring lines compared with the case of linear wave environment. Especially, the combination of the wind and wave loads excited the horizontal motions more and made the mooring top tension far higher than wave load was only applied. With regards to the second-order difference frequency wave load, the result with the Quadratic Transfer Function (QTF) is compared to the one with Newman’s approximation. As the simulation results between them was insignificant, the Newman’s approximation can be used instead of the complete QTF to reduce the computational effort.

Second Order Difference Frequency Wave-Current Loading Using Kelvin-Newman Approximation

2020 ◽  
Author(s):  
Farid P. Bakti ◽  
Moo-Hyun Kim
Keyword(s):  
Second Order ◽  
The Body ◽  
Difference Frequency ◽  
Computational Time ◽  
Forward Speed ◽  
Frequency Wave ◽  
Order Difference ◽  
First Order ◽  
Current Interaction ◽  
Current Loading

Abstract Kelvin & Newman introduced a linearization method to include the current (or forward speed) effect into the diffraction & radiation wave field for large-slender floating bodies. The K-N method assumes a steady far-field current while disregarding the steady potential field due to the presence of the body. The method is proven to be reliable when the Froude number is relatively small, the body shape is relatively slender (∂∂x≪∂∂y,∂∂z), and the sea condition is mild. This requirement is fulfilled for typical FPSOs and ship-shaped vessels in a typical current (or forward speed) condition. Several studies suggested that the presence of the current might change the first order hydrodynamic coefficients such as the first order diffraction force, added mass, and radiation damping. Currents also contributed to a change in the second-order slowly-varying drift force. However, the effect of current in the second-order difference-frequency force is yet to be investigated. By expanding the Kelvin-Newman approximation up to the second order, and solving the problem in the frequency domain, we can save computational time while expanding the accuracy of the scheme. The second order quadratic force is the main focus of this study, since it is the main contributor to the total second order difference frequency forces especially near the diagonal. By implementing the Kelvin-Newman wave current interaction approach up to the wave’s second order, we can assess the performance of the Kelvin-Newman wave current interaction formulation in various sea conditions.

Investigation of Nonlinear Difference-Frequency Wave Excitation on a Semisubmersible Offshore-Wind Platform With Bichromatic-Wave CFD Simulations

2021 ◽  
Author(s):  
Lu Wang ◽  
Amy Robertson ◽  
Jason Jonkman ◽  
Yi-Hsiang Yu ◽  
Arjen Koop ◽  
...  
Keyword(s):  
Potential Flow ◽  
Low Frequency ◽  
Flow Theory ◽  
Second Order ◽  
Difference Frequency ◽  
Offshore Wind ◽  
Viscous Drag ◽  
Cfd Simulations ◽  
Frequency Wave ◽  
Potential Flow Theory

Abstract The natural surge and pitch frequencies of semisubmersible offshore wind platforms are typically designed to be below the wave frequencies to avoid direct excitation. However, surge or pitch resonance can be excited by the nonlinear low-frequency loads generated by irregular incident waves. Second-order potential-flow models with added Morison drag have been found to underpredict this low-frequency excitation and response. As part of the OC6 project1, the authors performed computational fluid dynamics (CFD) simulations to enable a better understanding of the low-frequency loads and the limitations of lower-fidelity models. The focus of this paper is to set up a computationally cost-effective CFD simulation of a fixed semisubmersible platform to investigate nonlinear difference-frequency loads and establish the corresponding uncertainty in the results. Because of the high computing cost, CFD simulations of irregular waves can be challenging. Instead, simulations were performed with bichromatic waves having a shorter repeat period. A preliminary comparison with quadratic transfer functions from second-order potential-flow theory shows that CFD models consistently predict higher nonlinear wave loads at the difference frequency, likely because of flow separation and viscous drag not accounted for in potential-flow theory.

Sign in / Sign up

Export Citation Format

Share Document