scholarly journals Monitoring the Presence of Humic Substances in Wool and Silk by the Use of Nondestructive Fluorescence Spectroscopy: Quality Control for 14C Dating of Wool and Silk

Radiocarbon ◽  
2011 ◽  
Vol 53 (3) ◽  
pp. 429-442 ◽  
Author(s):  
Mathieu Boudin ◽  
Pascal Boeckx ◽  
Peter Vandenabeele ◽  
Sylvia Mitschke ◽  
Mark VAN Strydonck

Radiocarbon dating of degraded wool and silk provides 14C results of questionable reliability. In most cases, degraded wool/silk contains humic substances (HSs). Thus, a nondestructive fluorescence spectroscopy method, using a fiberoptic probe, was developed to monitor the presence of HSs in degraded wool and silk. This method can provide information about the presence of HSs before and after pretreatment and about the 14C age reliability. This study suggests considering with care wool/silk samples 14C dating wherein HSs are detected, because the conventional solvent pretreatment method using a NaOH wash is in most cases not sufficient to remove all humic substance contaminants. As a result, unreliable 14C dates can be provided.

Radiocarbon ◽  
2002 ◽  
Vol 44 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Dani Alon ◽  
Genia Mintz ◽  
Illit Cohen ◽  
Steve Weiner ◽  
Elisabetta Boaretto

One of the largest sources of uncertainty in radiocarbon dating stems from the sample pretreatment procedures used to minimize contamination. A major source of carbon contamination in charcoal from archaeological sites is humic substances carried by groundwater. Here we present a method, independent of 14C dating itself, to evaluate the effectiveness of the cleaning procedure of charcoal. Raman spectra of mixtures of humic substances (HS) and laboratory prepared charcoal indicate that Raman spectroscopy can be used as a semi-quantitative measure of the amount of humic substances associated with archaeological charcoal. Raman spectral analysis of archaeological charcoal samples subjected to different cleaning regimes supports this contention. Such measurements can provide quality control for charcoal preparation procedures and may assist in the interpretation of carbon-dating results.


Radiocarbon ◽  
2016 ◽  
Vol 59 (3) ◽  
pp. 757-764 ◽  
Author(s):  
Lucia Liccioli ◽  
Mariaelena Fedi ◽  
Luca Carraresi ◽  
Pier Andrea Mandò

AbstractAt INFN-LABEC (Florence, Italy), a new pretreatment for radiocarbon dating based on chloroform has been recently set up. This method aims to remove the synthetic resins used for artwork restoration, which otherwise could alter the original 14C content. The present study characterizes the efficiency of the process when applied to wood. We have verified whether the effectiveness of the pretreatment depends on the number of extractions in chloroform. We prepared samples by applying different volumes of Paraloid B-72®, one of the most widespread products used in restoration, on poplar wood of known age. Contaminated samples were artificially aged in a climatic chamber. A fraction from each sample was collected before any treatment and after respectively 1, 2, 3, and 4 extractions in chloroform, and 14C dating by AMS, the resin appears to be already removed after the first two extractions. Furthermore, the extracted mixtures of chloroform and possible removed Paraloid were measured by FTIR spectroscopy, the results of which confirmed the 14C results. The efficiency of the pretreatment was also verified on historical wooden materials that had been previously restored. In these cases, a higher number of extractions is required, suggesting a careful approach when dealing with “real” artworks.


Radiocarbon ◽  
2010 ◽  
Vol 52 (3) ◽  
pp. 1301-1311 ◽  
Author(s):  
Christopher M Russo ◽  
Jennifer A Tripp ◽  
Katerina Douka ◽  
Thomas F G Higham

Coastal archaeological sites that lack organic remains for radiocarbon dating are often abundant sources of molluscan shells. As a substitute for materials such as bone and charcoal, shells can be analyzed with 14C dating to determine a site's age. Despite their being convenient, non-mobile archaeological artifacts, molluscan shells are plagued by several issues, including carbonate remodeling, in which aragonite in shells is converted to calcite as predicted by thermodynamics. We present here a carbonate density separation technique that addresses the issue of carbonate remodeling. Using a density fractionation with bromoform, aragonite concentrations are enriched in shells that have undergone significant remodeling. The technique has been applied to archaeological shells and has returned dates that are younger than those previously determined for the same shells.


2021 ◽  
pp. 1-8
Author(s):  
Grégoire Guillet ◽  
Susanne Preunkert ◽  
Ludovic Ravanel ◽  
Maurine Montagnat ◽  
Ronny Friedrich

Abstract The current paper studies the dynamics and age of the Triangle du Tacul (TDT) ice apron, a massive ice volume lying on a steep high-mountain rock wall in the French side of the Mont-Blanc massif at an altitude close to 3640 m a.s.l. Three 60 cm long ice cores were drilled to bedrock (i.e. the rock wall) in 2018 and 2019 at the TDT ice apron. Texture (microstructure and lattice-preferred orientation, LPO) analyses were performed on one core. The two remaining cores were used for radiocarbon dating of the particulate organic carbon fraction (three samples in total). Microstructure and LPO do not substantially vary with along the axis of the ice core. Throughout the core, irregularly shaped grains, associated with strain-induced grain boundary migration and strong single maximum LPO, were observed. Measurements indicate that at the TDT ice deforms under a low strain-rate simple shear regime, with a shear plane parallel to the surface slope of the ice apron. Dynamic recrystallization stands out as the major mechanism for grain growth. Micro-radiocarbon dating indicates that the TDT ice becomes older with depth perpendicular to the ice surface. We observed ice ages older than 600 year BP and at the base of the lowest 30 cm older than 3000 years.


2021 ◽  
pp. 169-174
Author(s):  
Ivan I. Lishtvan ◽  
Vera N. Aleinikova

Knowledge about structure and rheological peculiarities of drilling solutions and reagents applied for the proceeding of oil wells has significant value for the forecasting of oil wells drilling. The research results of the structure of the humic substances of peat and brown coals precipitated in different pH ranges from the standpoint of their ability to structure formation on the base of the rheological curves obtaining of the flow of their dispersions and determining of their rheological parameters in terms of their application in drilling practice are given in the article. It is established that during transition from fraction, beset into alkaline media (12.0–8.5) to fraction beset into acid media (5.0–2.0) the decrease of the rheological indicators of caustobiolate humic substance is occurred. Rheological curves of the flow of the disperse of caustobiolate humic substances of the fraction 1 and 2 are characterized for strong fossil structures, disperses of humic substances of the fraction 3 is for less strong coagulation structures. Less structured are humic substances of brown coal so that their use is preferable for the regulation of the structure and rheological peculiarities of drilling solutions.


2016 ◽  
Vol 13 (5) ◽  
pp. 1537-1552 ◽  
Author(s):  
Marta Petrillo ◽  
Paolo Cherubini ◽  
Giulia Fravolini ◽  
Marco Marchetti ◽  
Judith Ascher-Jenull ◽  
...  

Abstract. Due to the large size (e.g. sections of tree trunks) and highly heterogeneous spatial distribution of deadwood, the timescales involved in the coarse woody debris (CWD) decay of Picea abies (L.) Karst. and Larix decidua Mill. in Alpine forests are largely unknown. We investigated the CWD decay dynamics in an Alpine valley in Italy using the chronosequence approach and the five-decay class system that is based on a macromorphological assessment. For the decay classes 1–3, most of the dendrochronological samples were cross-dated to assess the time that had elapsed since tree death, but for decay classes 4 and 5 (poorly preserved tree rings) radiocarbon dating was used. In addition, density, cellulose, and lignin data were measured for the dated CWD. The decay rate constants for spruce and larch were estimated on the basis of the density loss using a single negative exponential model, a regression approach, and the stage-based matrix model. In the decay classes 1–3, the ages of the CWD were similar and varied between 1 and 54 years for spruce and 3 and 40 years for larch, with no significant differences between the classes; classes 1–3 are therefore not indicative of deadwood age. This seems to be due to a time lag between the death of a standing tree and its contact with the soil. We found distinct tree-species-specific differences in decay classes 4 and 5, with larch CWD reaching an average age of 210 years in class 5 and spruce only 77 years. The mean CWD rate constants were estimated to be in the range 0.018 to 0.022 y−1 for spruce and to about 0.012 y−1 for larch. Snapshot sampling (chronosequences) may overestimate the age and mean residence time of CWD. No sampling bias was, however, detectable using the stage-based matrix model. Cellulose and lignin time trends could be derived on the basis of the ages of the CWD. The half-lives for cellulose were 21 years for spruce and 50 years for larch. The half-life of lignin is considerably higher and may be more than 100 years in larch CWD. Consequently, the decay of Picea abies and Larix decidua is very low. Several uncertainties, however, remain: 14C dating of CWD from decay classes 4 and 5 and having a pre-bomb age is often difficult (large age range due to methodological constraints) and fall rates of both European larch and Norway spruce are missing.


Revista CERES ◽  
2017 ◽  
Vol 64 (4) ◽  
pp. 392-398
Author(s):  
Diego Magalhães de Melo* ◽  
Eugênio Ferreira Coelho ◽  
Raul Castro Carriello Rosa ◽  
Ana Lucia Borges ◽  
Djalma Barbosa dos Santos ◽  
...  

ABSTRACT The use of humic substances and plant extract has been increasing mainly in organic crop systems without scientific-based recommendations. Research is necessary to evaluate the feasibility and the recommendations of these substances. The objective of this work was to evaluate the effect of humic substances (humic and fulvic acids) applied by fertigation with and without saponin-based plant extracts on growth and yield of ‘BRS Princesa’ banana. The experiment was carried out using the banana cultivar ‘BRS Princesa’, at a spacing of 2.0 × 2.5 m, fertigated by drip irrigation in a Dystric Densic Xantic Ferralsol, at the Recôncavo da Bahia, Brazil. Treatments consisted of five doses of humic substances (0.0; 70; 105; 140, and 210 L ha-1cycle-1) applied with and without a saponin-based plant extract in a randomized block design in split-plot scheme. The following growth variables were evaluated: number of leaves, pseudostem height, pseudostem diameter, and length and width of the third leaf. The number of fruits/hand and hands/bunch, hand and bunch yield, and length and fruit diameter of the second central hand were evaluated during harvest. The doses of humic substances influenced only pseudostem height. Hand yield, as well as fruit length and diameter of ‘BRS Princesa’ banana were higher in plants fertigated with humic substance and plant extract in comparison with plants fertigated with only humic substance.


Author(s):  
Oladotun A. Ojo ◽  
Peter A. Oluwafisoye ◽  
Charles O. Chime

The sensitivity of radiographic films is an important factor to the clarity and accuracy of X-ray exposure to patients during treatment or diagnostic periods. It is therefore important to do a thorough analysis of the sensitivity of the radiographic film before and after exposure to enhance the Quality Assurance (QA) and the Quality Control (QC), of the exposure procedures. The optical densities (OD) of each film was measured, with a densitometer model MA 5336, made by GAMMEX. These values were then converted to the absorbed dose (X mGy), which is the amount of dose absorbed by each patient. The optical density versus the dose curve, followed the expected pattern, showing a good prediction from the General model, that the films employed in the exposures were of good quality and standard. Hence the optical density versus dose sensitometric curves depicts the outcome of the various films sensitivity after an exposure to the X-ray radiation through the patients.


Sign in / Sign up

Export Citation Format

Share Document