A New Method of Real-Time Kinematic Positioning Suitable for Baselines of Different Lengths

2020 ◽  
pp. 1-13
Author(s):  
Jinhai Liu ◽  
Rui Tu ◽  
Rui Zhang ◽  
Xiaodong Huang ◽  
Pengfei Zhang ◽  
...  
Keyword(s):  
Real Time ◽  
High Precision ◽  
Carrier Phase ◽  
Single Frequency ◽  
Short Baseline ◽  
Positioning Accuracy ◽  
Real Time Kinematic ◽  
Positioning Method ◽  
Wide Lane ◽  
Long Baselines

This study introduces a new real-time kinematic (RTK) positioning method which is suitable for baselines of different lengths. The method merges carrier-phase wide-lane, and ionosphere-free observation combinations (LWLC) instead of using pseudo-range, and carrier-phase ionosphere-free combination (PCLC), or single-frequency pseudo-range and phase combination (P1L1). In a first step, the double-differenced wide-lane ambiguities were calculated and fixed using the pseudo-range and carrier-phase wide-lane combination observations. Once the double-differenced wide-lane integer ambiguities were known, the wide-lane combined observations were regarded as accurate pseudo-range observations. Subsequently, the carrier-phase wide-lane, and ionosphere-free combined observations were used to fix the double-differenced carrier-phase integer ambiguities, achieving the final RTK positioning. The RTK positioning analysis was performed for short, medium, and long baselines, using the P1L1, PCLC, and LWLC methods, respectively. For a short baseline, the LWLC method demonstrated positioning accuracy similar to the P1L1 method, and performed better than the PCLC method. For medium and long baselines, the positioning accuracy of the LWLC method was slightly higher than those of the PCLC and P1L1 methods. In conclusion, the LWLC method provided high-precision RTK positioning results for baselines with different lengths, as it used high-precision carrier-phase observations with fixed ambiguities instead of low-precision pseudo-range observations.

scholarly journals Evaluation of Real-Time Kinematic Positioning and Deformation Monitoring Using Xiaomi Mi 8 Smartphone

2022 ◽  
Vol 12 (1) ◽  
pp. 435
Author(s):  
Shulin Zeng ◽  
Cuilin Kuang ◽  
Wenkun Yu
Keyword(s):  
Real Time ◽  
Low Cost ◽  
Density Ratio ◽  
Deformation Monitoring ◽  
Global Navigation Satellite Systems ◽  
Single Frequency ◽  
Short Baseline ◽  
Positioning Accuracy ◽  
Satellite Systems ◽  
Real Time Kinematic

Modern low-cost electronic devices can achieve high precision for global navigation satellite systems (GNSSs) and related applications. Recently, the pseudo-range and carrier phase have been directly obtained from a smartphone to establish a professional-level surveying device. Although promising results have been obtained by linking to an external GNSS antenna, the real-time kinematic (RTK) positioning performance requires further improvement when using the embedded smartphone antenna. We first investigate the observation quality characteristics of the Xiaomi Mi 8 smartphone. The carrier-to-noise-density ratio of L5/E5a signals is below that of L1/E1 signals, and the cycle slip and loss of lock are severe, especially for L5/E5a signals. Therefore, we use an improved stochastic model and ambiguity-resolution strategies to improve the short-baseline RTK positioning accuracy. Experimental results show that the ambiguity fixing rate can reach approximately 90% in 3 h of observations when using the embedded antenna, while the GPS/Galileo/BDS single-frequency combination is more suitable for smartphones. On the other hand, convergence takes 10–30 min, and the RTK positioning accuracy can reach 1 and 2 cm along the horizontal and vertical directions, respectively, if ambiguity is resolved correctly. Moreover, we verify the feasibility of using a mass-produced smartphone for deformation monitoring. Results from a simulated dynamic deformation experiment indicate that a smartphone can recognise deformations as small as 2 cm.

Comparison between multi-constellation ambiguity-fixed PPP and RTK for maritime precise navigation

2015 ◽  
Vol 9 (2) ◽  
Author(s):  
Javier Tegedor ◽  
Xianglin Liu ◽  
Ole Ørpen ◽  
Niels Treffers ◽  
Matthew Goode ◽  
...  
Keyword(s):  
Performance Assessment ◽  
Real Time ◽  
Carrier Phase ◽  
Precise Point Positioning ◽  
High Accuracy ◽  
Reference Station ◽  
Satellite Systems ◽  
Real Time Kinematic ◽  
Gnss Data ◽  
Long Baselines

AbstractIn order to achieve high-accuracy positioning, either Real-Time Kinematic (RTK) or Precise Point Positioning (PPP) techniques can be used. While RTK normally delivers higher accuracy with shorter convergence times, PPP has been an attractive technology for maritime applications, as it delivers uniform positioning performance without the direct need of a nearby reference station. Traditional PPP has been based on ambiguity-­float solutions using GPS and Glonass constellations. However, the addition of new satellite systems, such as Galileo and BeiDou, and the possibility of fixing integer carrier-phase ambiguities (PPP-AR) allow to increase PPP accuracy. In this article, a performance assessment has been done between RTK, PPP and PPP-AR, using GNSS data collected from two antennas installed on a ferry navigating in Oslo (Norway). RTK solutions have been generated using short, medium and long baselines (up to 290 km). For the generation of PPP-AR solutions, Uncalibrated Hardware Delays (UHDs) for GPS, Galileo and BeiDou have been estimated using reference stations in Oslo and Onsala. The performance of RTK and multi-­constellation PPP and PPP-AR are presented.

scholarly journals Single-epoch RTK performance assessment of tightly combined BDS-2 and newly complete BDS-3

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Wanke Liu ◽  
Mingkui Wu ◽  
Xiaohong Zhang ◽  
Wang Wang ◽  
Wei Ke ◽  
...  
Keyword(s):  
Performance Assessment ◽  
Success Rate ◽  
Ambiguity Resolution ◽  
Satellite System ◽  
Asia Pacific ◽  
Single Frequency ◽  
Navigation Satellite ◽  
Short Baseline ◽  
Positioning Accuracy ◽  
Single Epoch

AbstractThe BeiDou global navigation satellite system (BDS-3) constellation deployment has been completed on June 23, 2020, with a full constellation comprising 30 satellites. In this study, we present the performance assessment of single-epoch Real-Time Kinematic (RTK) positioning with tightly combined BeiDou regional navigation satellite system (BDS-2) and BDS-3. We first investigate whether code and phase Differential Inter-System Biases (DISBs) exist between the legacy B1I/B3I signals of BDS-3/BDS-2. It is discovered that the DISBs are in fact about zero for the baselines with the same or different receiver types at their endpoints. These results imply that BDS-3 and BDS-2 are fully interoperable and can be regarded as one constellation without additional DISBs when the legacy B1I/B3I signals are used for precise relative positioning. Then we preliminarily evaluate the single-epoch short baseline RTK performance of tightly combined BDS-2 and the newly completed BDS-3. The performance is evaluated through ambiguity resolution success rate, ambiguity dilution of precision, as well as positioning accuracy in kinematic and static modes using the datasets collected in Wuhan. Experimental results demonstrate that the current BDS-3 only solutions can deliver comparable ambiguity resolution performance and much better positioning accuracy with respect to BDS-2 only solutions. Moreover, the RTK performance is much improved with tightly combined BDS-3/BDS-2, particularly in challenging or harsh conditions. The single-frequency single-epoch tightly combined BDS-3/BDS-2 solution could deliver an ambiguity resolution success rate of 96.9% even with an elevation cut-off angle of 40°, indicating that the tightly combined BDS-3/BDS-2 could achieve superior RTK positioning performance in the Asia–Pacific region. Meanwhile, the three-dimensional (East/North/Up) positioning accuracy of BDS-3 only solution (0.52 cm/0.39 cm/2.14 cm) in the kinematic test is significantly better than that of the BDS-2 only solution (0.85 cm/1.02 cm/3.01 cm) due to the better geometry of the current BDS-3 constellation. The tightly combined BDS-3/BDS-2 solution can provide the positioning accuracy of 0.52 cm, 0.22 cm, and 1.80 cm, respectively.

High-precision roll attitude estimation of decoupled canards relative to the projectile body using bipolar hall-effect sensors

2021 ◽  
pp. 1-9
Author(s):  
Tingting Yin ◽  
Zhong Yang ◽  
Youlong Wu ◽  
Fangxiu Jia
Keyword(s):  
Hall Effect ◽  
Real Time ◽  
High Precision ◽  
Solution Method ◽  
Estimation Method ◽  
Estimation Algorithm ◽  
Attitude Estimation ◽  
Fuzzy Algorithms ◽  
Positioning Method ◽  
Hall Effect Sensors

The high-precision roll attitude estimation of the decoupled canards relative to the projectile body based on the bipolar hall-effect sensors is proposed. Firstly, the basis engineering positioning method based on the edge detection is introduced. Secondly, the simplified dynamic relative roll model is established where the feature parameters are identified by fuzzy algorithms, while the high-precision real-time relative roll attitude estimation algorithm is proposed. Finally, the trajectory simulations and grounded experiments have been conducted to evaluate the advantages of the proposed method. The positioning error is compared with the engineering solution method, and it is proved that the proposed estimation method has the advantages of the high accuracy and good real-time performance.

scholarly journals Indoor Positioning Method Based on Infrared Vision and UWB Fusion

2021 ◽  
Vol 2078 (1) ◽  
pp. 012070
Author(s):  
Qianrong Zhang ◽  
Yi Li
Keyword(s):  
Real Time ◽  
Indoor Localization ◽  
Low Cost ◽  
Ultra Wideband ◽  
Coverage Area ◽  
Positioning Accuracy ◽  
Mobile Vehicle ◽  
Positioning Method ◽  
Positioning Algorithm ◽  
Infrared Vision

Abstract Ultra-wideband (UWB) has broad application prospects in the field of indoor localization. In order to make up for the shortcomings of ultra-wideband that is easily affected by the environment, a positioning method based on the fusion of infrared vision and ultra-wideband is proposed. Infrared vision assists locating by identifying artificial landmarks attached to the ceiling. UWB uses an adaptive weight positioning algorithm to improve the positioning accuracy of the edge of the UWB positioning coverage area. Extended Kalman filter (EKF) is used to fuse the real-time location information of the two. Finally, the intelligent mobile vehicle-mounted platform is used to collect infrared images and UWB ranging information in the indoor environment to verify the fusion method. Experimental results show that the fusion positioning method is better than any positioning method, has the advantages of low cost, real-time performance, and robustness, and can achieve centimeter-level positioning accuracy.

A Model for Combined GPS and BDS Real-Time Kinematic Positioning using one Common Reference Ambiguity

2018 ◽  
Vol 71 (4) ◽  
pp. 1011-1024 ◽  
Author(s):  
Rui Tu ◽  
Jinhai Liu ◽  
Rui Zhang ◽  
Pengfei Zhang ◽  
Xiaochun Lu
Keyword(s):  
Real Time ◽  
Global Positioning System ◽  
Carrier Phase ◽  
Satellite System ◽  
Phase System ◽  
Combined Model ◽  
Common Reference ◽  
Beidou Navigation Satellite System ◽  
Real Time Kinematic ◽  
Global Positioning

This paper proposes a model for combined Global Positioning System (GPS) and BeiDou Navigation Satellite System (BDS) Real-Time Kinematic (RTK) positioning. The approach uses only one common reference ambiguity, for example, that of GPS L1, and estimates the pseudo-range and carrier phase system and frequency biases. The validations show that these biases are stable during a continuous reference ambiguity period and can be easily estimated, and the other estimated double-differenced ambiguities, such as those of GPS L2, BDS L1, and BDS L2, are not affected. Therefore, our approach solves the problems of a frequently changing reference satellite. In addition, because all the carrier phase observations use the same reference ambiguity, a relationship is established between the different systems and frequencies, and the strength of the combined model is thus increased.

Directly Georeferenced Ground Feature Points with UAV Borne Photogrammetric Platform without Ground Control

2013 ◽  
Vol 284-287 ◽  
pp. 1523-1527
Author(s):  
Meng Lun Tsai ◽  
Kai Wei Chiang ◽  
Cheng Fang Lo ◽  
Jiann Yeou Rau
Keyword(s):  
Real Time ◽  
Spatial Information ◽  
Disaster Relief ◽  
Low Cost ◽  
Control Point ◽  
Integrated System ◽  
Single Frequency ◽  
Ground Control ◽  
Differential Gps ◽  
Positioning Accuracy

In order to facilitate applications such as environment detection or disaster monitoring, developing a quickly and low cost system to collect near real time spatial information is very important. Such a rapid spatial information collection capability has become an emerging trend in the technology of remote sensing and mapping application. In this study, a fixed-wing UAV based spatial information acquisition platform is developed and evaluated. The proposed UAV based platform has a direct georeferencing module including an low cost INS/GPS integrated system, low cost digital camera as well as other general UAV modules including immediately video monitoring communication system. This direct georeferencing module is able to provide differential GPS processing with single frequency carrier phase measurements to obtain sufficient positioning accuracy. All those necessary calibration procedures including interior orientation parameters, the lever arm and boresight angle are implemented. In addition, a flight test is performed to verify the positioning accuracy in direct georeferencing mode without using any ground control point that is required for most of current UAV based photogrammetric platforms. In other word, this is one of the pilot studies concerning direct georeferenced based UAV photogrammetric platform. The preliminary results in term of positioning accuracy in direct georeferenced mode without using any GCP illustrate horizontal positioning accuracies in x and y axes are both less than 20 meters, respectively. On the contrary, the positioning accuracy of z axis is less than 50 meters with 600 meters flight height above ground. Such accuracy is good for near real time disaster relief. Therefore, it is a relatively safe and cheap platform to collect critical spatial information for urgent response such as disaster relief and assessment applications where ground control points are not available.

An Improved Geometry-free Three Carrier Ambiguity Resolution Method for the BeiDou Navigation Satellite System

2016 ◽  
Vol 69 (6) ◽  
pp. 1393-1408 ◽  
Author(s):  
Xing Wang ◽  
Wenxiang Liu ◽  
Guangfu Sun
Keyword(s):  
Ambiguity Resolution ◽  
Carrier Phase ◽  
Success Probability ◽  
Satellite System ◽  
Observation Data ◽  
Short Baseline ◽  
Long Baseline ◽  
Triple Frequency ◽  
Wide Lane ◽  
Three Carrier Ambiguity Resolution

BeiDou satellites transmit triple-frequency signals, which bring substantial benefits to carrier phase Ambiguity Resolution (AR). The traditional geometry-free model Three-Carrier Ambiguity Resolution (TCAR) method looks for a suitable combination of carrier phase and code-range observables by searching and comparing in the integer range, which limits the AR success probability. By analysing the error characteristics of the BeiDou triple-frequency observables, we introduce a new procedure to select the optimal combination of carrier phase and code observables to resolve the resolution of Extra-Wide-Lane (EWL) and Wide-Lane (WL) ambiguity. We also investigate a geometry-free and ionosphere-eliminated method for AR of the Medium-Lane (ML) and Narrow-Lane (NL) observables. In order to evaluate the performance of the improved TCAR method, real BeiDou triple-frequency observation data for different baseline cases were collected and processed epoch-by-epoch. The results show that the improved geometry-free TCAR method increases the single epoch AR success probability by up to 90% for short baseline and 80% for long baseline. The A perfect (100%) AR success probability can also be effortlessly achieved by averaging the float ambiguities over just tens of epochs.

scholarly journals The Multipath Influence in Real-Time Kinematic of GNSS Observations at Different Antenna Heights

2019 ◽  
Vol 7 (2) ◽  
Author(s):  
Bakheet Agab Nour ◽  
Ahmet Turan Ozdemir ◽  
Peter Garang ◽  
Oğuzhan Ağırbaş
Keyword(s):  
Signal Processing ◽  
Real Time ◽  
Carrier Phase ◽  
Inverse Relationship ◽  
Antenna Design ◽  
Error Source ◽  
Multipath Error ◽  
Real Time Kinematic ◽  
Gnss Observations

Multipath is a dominant error source in Real-Time Kinematic (RTK) applications that reduces the position, time and velocity accuracy. Mitigation of such errors can be achieved by better signal processing and antenna design. This paper attempts to examine the different height of RTK system antenna with regards to the multipath error. The results obtained in this work show height significantly change of multipath in pseudo range (MP1) and multipath in the carrier phase (MP2). Different antenna height does not give the same multipath error result in the tests that we have conducted in this work. The optimal height of the antenna was achieved as two meters in order to obtain a minimum multipath error for   MP1 and MP2. At the end of this work, we experimentally proved that there is an inverse relationship between the height of the antenna and multipath with RTK algorithm.

Sign in / Sign up

Export Citation Format

Share Document