Microcharacterization of a Natural Blue Pigment Used in Wall Paintings During the Romanesque Period in Northern Spain

2013 ◽  
Vol 19 (6) ◽  
pp. 1645-1652 ◽  
Author(s):  
Josefina Pérez-Arantegui ◽  
Carlos Pardos ◽  
José-Luis Abad ◽  
José-Ramón García
Keyword(s):  
Electron Microscopy ◽  
Analytical Data ◽  
Reflectance Spectroscopy ◽  
Blue Pigment ◽  
Wall Paintings ◽  
X Ray Diffraction ◽  
Northern Spain ◽  
Natural Pigment ◽  
X Ray

AbstractIn Romanesque wall paintings in Aragon (Spain), the pigment used for creating blue was a very characteristic mineral, aerinite, which came from local ores in the southern Pyrenees. Optical and scanning electron microscopy (SEM), with energy-dispersive X-ray (EDX) analysis, X-ray diffraction, and reflectance spectroscopy were used to make a detailed microcharacterization of this rare blue pigment in order to improve the knowledge of its composition and possible variability, from samples of medieval paintings and some mineral ores. New analytical data on the chemical composition of the blue pigment are reported here, together with the characterization of its microstructure, and the heterogeneity of the natural pigment made by the features of the ore itself. X-ray diffraction pattern and color parameters of the mineral ores are also included. The data obtained by SEM-EDX will assist identification of this pigment by electron microscopy. The natural variability in composition observed in the samples may be used to explain formation of the extracted mineral and to compare several ore sources. Connection of the ore composition with the pigments used in Romanesque wall paintings will help both provenance and attribution studies.

Vacuum Pressure MOVCD Growth and Characterization of AlN Films On MgO(100), Sapphire, and Si

1997 ◽  
Vol 482 ◽  
Author(s):  
A. D. Serra ◽  
N. P. Magtoto ◽  
D. C. Ingram ◽  
H. H. Richardson
Keyword(s):  
Electron Microscopy ◽  
Reflectance Spectroscopy ◽  
Vacuum Pressure ◽  
Ex Situ ◽  
Infrared Reflectance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Substrate Temperatures ◽  
Scanning Electron

abstractFilms of AlN were grown on MgO(100), Al2O3, and Si under vacuum pressure (10-3 to 10-4 Torr) at different substrate temperatures. They were examined ex situ with infrared reflectance spectroscopy, scanning electron microscopy, x-ray diffraction and rutherford backscattering spectroscopy. Highly oriented smooth films were grown at film thicknesses below 1 μm. Thicker films showed significantly more roughness but remained oriented with respect to the substrate. AIN growth was faster on Si than MgO(100) or Al2O3 and Si was the only substrate that growth was observed at 500°C.

scholarly journals Mineralogical Characterization of Carreaux de Pavement from Northern Spain (Tiebas, Navarre)

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 153
Author(s):  
Iván Ruiz-Ardanaz ◽  
Esther Lasheras ◽  
Adrián Durán
Keyword(s):  
Analytical Data ◽  
X Ray Diffraction ◽  
13Th Century ◽  
Northern Spain ◽  
Mineralogical Characterization ◽  
X Ray ◽  
Ft Ir ◽  
Dark Green ◽  
Ft Ir Spectroscopy

Several medieval tiles from Tiebas Castle in Navarre, classified as carreaux de pavement, were mineralogically analyzed. The aim was to add information to the very scarce analytical data available for carreaux de pavement in order to provide a quality primary work, mainly descriptive, in this topic. The characterization techniques applied were: optical microscopy (OM), colorimetry, Fourier transform infrared (FT-IR) spectroscopy, differential thermal analysis and thermogravimetry (DTA-TG), X-ray fluorescence (XRF) spectroscopy, petrographic microscopy (PM), X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS). The tiles comprised three layers: a top glaze with mainly silicon and lead-based compounds; a thin layer of silicoaluminate (very possibly kaolinite) called engobe under it; and the pastes, composed of quartz, hematite, potassium feldspars and calcite. Honey glazes were richer in iron, being copper-based compounds responsible for dark green glazes. The orangish-reddish color of the pastes was provided by hematite. Although the tiles were found in three different locations within the castle, no significant differences were detected among them. The carreaux de pavement from Tiebas had similarities with that from the Bordeaux region. According to the composition data and thickness of tiles from other French carreaux de pavement, the Tiebas artifacts were dated to the 13th century.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

Detonation Synthesis of Nano-Size Materials

1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nucleation And Growth ◽  
Detonation Synthesis ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of a coating for radioprotection, by X-ray diffraction, scanning electron microscopy, and dispersive energy spectroscopy

2022 ◽  
Vol 321 ◽  
pp. 126326
Author(s):  
Gladis Aparecida Galindo Reisemberger de Souza ◽  
Ramón Sigifredo Cortés Paredes ◽  
Frieda Saicla Barros ◽  
Gustavo Bavaresco Sucharski ◽  
Sebastião Ribeiro Junior ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

scholarly journals Investigations of M3Al8O15:Eu3+,Dy3+ (M = Ba, Ca, Mg) phosphors

2016 ◽  
Vol 34 (2) ◽  
pp. 412-417
Author(s):  
Esra Öztürk
Keyword(s):  
Electron Microscopy ◽  
Solid State Reaction Method ◽  
Morphological Characterization ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Three Samples ◽  
Scanning Electron ◽  
The Eu

AbstractIn this work, aluminate type phosphorescence materials were synthesized via the solid state reaction method and the photoluminescence (PL) properties, including excitation and emission bands, were investigated considering the effect of trace amounts of activator (Eu3+) and co-activator (Dy3+). The estimated thermal behavior of the samples at certain temperatures (> 1000 °C) during heat treatment was characterized by differential thermal analysis (DTA) and thermogravimetry (TG). The possible phase formation was characterized by X-ray diffraction (XRD). The morphological characterization of the samples was performed by scanning electron microscopy (SEM). The PL analysis of three samples showed maximum emission bands at around 610 nm, and additionally near 589 nm, 648 nm and 695 nm. The bands were attributed to typical transitions of the Eu3+ ions.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Sign in / Sign up

Export Citation Format

Share Document