Bell Pepper and Weed Response to Dimethyl Disulfide plus Chloropicrin and Herbicide Systems

2017 ◽  
Vol 31 (5) ◽  
pp. 694-700 ◽  
Author(s):  
Peter M. Eure ◽  
A. Stanley Culpepper

Bell pepper producers are faced with the challenge of controlling weeds following the phase-out of methyl bromide (MBr). Numerous attempts have been made to find a single fumigant or herbicide to control a broad spectrum of weeds. Adequate weed control in bell pepper will likely require weed management systems utilizing both fumigant and herbicide options. A weed management system including the fumigant dimethyl disulfide (DMDS) plus chloropicrin (Pic) plus the herbicide napropamide prior to transplant followed byS-metolachlor POST may be necessary to replace MBr. Field experiments were conducted during 2010 and 2011 near Ty Ty, Georgia to determine bell pepper and weed response to DMDS plus Pic or in systems with napropamide and/orS-metolachlor. Bell pepper were not significantly injured by DMDS plus Pic or napropamide. Injury caused byS-metolachlor was transient and plants fully recovered by 4 weeks after treatment (WAT). Yellow nutsedge control 6 WAT using DMDS plus Pic applied at 468 or 560 L ha−1controlled yellow nutsedge 91 to 95%. Large crabgrass control 6 WAT was 92 to 100% when DMDS plus Pic was applied at 468 or 560 L ha−1with or without a(n) herbicide (S-metolachlor or napropamide). Palmer Amaranth control prior to harvest was 21, 64, and 85% using DMDS plus Pic at 374, 468, or 560 L ha−1, respectively. DMDS plus Pic applied at 468 or 560 L ha-1with napropamide followed byS-metolachlor POST gave 95 to 99% control of Palmer amaranth 6 WAT. Consistent weed control and optimum yields were obtained when DMDS plus Pic was used at 468 L ha−1plus napropamide beneath plastic mulch followed byS-metolachlor POST.

1996 ◽  
Vol 10 (1) ◽  
pp. 145-152 ◽  
Author(s):  
John S. Richburg ◽  
John W. Wilcut ◽  
Daniel L. Colvin ◽  
Gerald R. Wiley

Field experiments conducted at four locations in Georgia and two locations in Florida during 1992 and 1993 evaluated AC 263,222 application rates and timings, systems, and mixtures for weed control, peanut injury, and yield. All rates of AC 263,222 applied early POST (EPOST) or POST controlledIpomoeamorningglories and smallflower morningglory at least 90%, and purple and yellow nutsedge at least 81%. Florida beggarweed and sicklepod control generally was highest when metolachlor was applied PPI followed by AC 263,222 applied EPOST at 71 g/ha, AC 263,222 at 27 or 36 g/ha plus bentazon plus paraquat applied POST, or with bentazon plus paraquat applied EPOST followed by AC 263,222 applied POST at 36 or 53 g/ha. Acifluorfen and acifluorfen plus bentazon reduced Florida beggarweed and sicklepod control at several locations when applied in mixture with AC 263,222. Common ragweed and hairy indigo control were 85 to 95% with bentazon plus paraquat applied EPOST followed by AC 263,222 applied POST at 36 or 53 g/ha. Highest peanut yields were obtained with treatments providing high levels of weed control.


Weed Science ◽  
1987 ◽  
Vol 35 (3) ◽  
pp. 328-332 ◽  
Author(s):  
Robert M. Menges

The influence of two weed management systems was determined on weed seed and seedling populations and on yields of cantaloupe (Cucumis meloL. var.reticulatusNaudin ‘Perlita′), bell pepper (Capsicum annuumL. var.grossum‘Grande Rio 66′), cotton (Gossypium hirsutumL. ‘CP 3374′), onion (Allium cepaL. ‘1015Y′), and cabbage (Brassica oleracea, var.capitataL. 'Sanibel′) sequentially grown in two 3-yr cycles. Palmer amaranth (Amaranthus palmeriS. Wats. # AMAPA) did not exist initially, but hurricane-introduced seed populations increased to 1.1 billion/ha as seed populations of common purslane (Portulaca oleraceaL. # POROL) decreased from 786 million/ha to 124 million/ha in the 6-yr period, without weeding or herbicide. Use of herbicides and handweeding reduced Palmer amaranth seed populations 98%, but 18 million/ha still remained after 6 yr. The use of herbicides and Palmer amaranth interference decreased the seed populations of common purslane by 84%, but handweeding was inefficient. Yields of all but the first crop of cantalouple were almost totally eliminated by season-long interference of Palmer amaranth. Savings with the utilization of herbicides rather than handweeding ranged from $62/ha for cotton to $4703/ha for bell pepper.


Weed Science ◽  
1998 ◽  
Vol 46 (6) ◽  
pp. 698-702 ◽  
Author(s):  
W. Carroll Johnson ◽  
Benjamin G. Mullinix

Field studies were conducted from 1995 to 1997 near Tifton, GA, to determine the benefits of stale seedbed weed control in cucumber. Three stale seedbed management systems—(1) power till stale seedbeds twice (2 ×), (2) glyphosate application immediately after planting, and (3) combination system of stale seedbeds power tilled once 2 wk prior to planting followed by glyphosate application immediately after planting cucumber—were evaluated as main plots. Subplots were weed management systems after planting cucumber: intensive, basic, and cultivation alone. Weed densities were generally greater in 1996 and 1997 than in 1995. Yellow nutsedge was the overall predominant species in 1995 (46 plants m−2), with Florida pusley being the predominant species in 1996 and 1997, at 80 and 124 plants m−2, respectively. Generally, stale seedbeds shallow tilled 2 × had fewer weeds and greater cucumber yields than stale seedbeds treated with glyphosate. Glyphosate did not adequately control emerged Florida pusley on stale seedbeds, resulting in reduced cucumber yield. Clomazone preemergence and bentazon/halosulfuron postemergence were used for broadleaf weed control in the intensive weed management system. These herbicides injured cucumber plants, delayed maturity, and reduced yield. Based on our results, stale seedbeds shallow tilled 2 × can be integrated into cucumber production and provide effective cultural weed control. Furthermore, these systems will replace the need for potentially injurious herbicides.


Weed Science ◽  
2003 ◽  
Vol 51 (6) ◽  
pp. 1002-1009 ◽  
Author(s):  
Dunk Porterfield ◽  
John W. Wilcut ◽  
Jerry W. Wells ◽  
Scott B. Clewis

Field studies conducted at three locations in North Carolina in 1998 and 1999 evaluated crop tolerance, weed control, and yield with CGA-362622 alone and in combination with various weed management systems in transgenic and nontransgenic cotton systems. The herbicide systems used bromoxynil, CGA-362622, glyphosate, and pyrithiobac applied alone early postemergence (EPOST) or mixtures of CGA-362622 plus bromoxynil, glyphosate, or pyrithiobac applied EPOST. Trifluralin preplant incorporated followed by (fb) fluometuron preemergence (PRE) alone or fb a late POST–directed (LAYBY) treatment of prometryn plus MSMA controlled all the weed species present less than 90%. Herbicide systems that included soil-applied and LAYBY herbicides plus glyphosate EPOST or mixtures of CGA-362622 EPOST plus bromoxynil, glyphosate, or pyrithiobac controlled broadleaf signalgrass, entireleaf morningglory, large crabgrass, Palmer amaranth, prickly sida, sicklepod, and smooth pigweed at least 90%. Only cotton treated with these herbicide systems yielded equivalent to the weed-free check for each cultivar. Bromoxynil systems did not control Palmer amaranth and sicklepod, pyrithiobac systems did not control sicklepod, and CGA-362622 systems did not control prickly sida.


2015 ◽  
Vol 29 (3) ◽  
pp. 350-358 ◽  
Author(s):  
Daniel O. Stephenson ◽  
Jason A. Bond ◽  
Randall L. Landry ◽  
H. Matthew Edwards

Four field experiments were conducted in Louisiana and Mississippi in 2009 and 2010 to evaluate POST herbicides treatments with tembotrione applied alone or as a prepackaged mixture with thiencarbazone for weed control in corn. Treatments included tembotrione at 92 g ai ha−1, thiencarbazone : tembotrione at 15 : 76 g ai ha−1, atrazine at 2,240 g ai ha−1, glufosinate at 450 g ai ha−1, glyphosate at 860 g ae ha−1, and coapplications of tembotrione or thiencarbazone : tembotrione with atrazine, glufosinate, or glyphosate. All treatments were applied to 26-cm corn in the V4 growth stage. Treatments containing thiencarbazone : tembotrione and those with tembotrione controlled barnyardgrass, browntop millet, entireleaf morningglory, hophornbeam copperleaf, johnsongrass, Palmer amaranth, and velvetleaf 85 to 96% and 43 to 97% 28 d after treatment and at corn harvest, respectively. Corn yield ranged from 9,200 to 10,420 kg ha−1and was greater than the nontreated control following all herbicide treatments, except atrazine alone. Results indicated that thiencarbazone : tembotrione or tembotrione POST is an option for weed management in corn, and applications of thiencarbazone : tembotrione would be strongly encouraged where rhizomatous johnsongrass is problematic.


1985 ◽  
Vol 12 (1) ◽  
pp. 22-27 ◽  
Author(s):  
Daniel L. Colvin ◽  
Robert H. Walker ◽  
Michael G. Patterson ◽  
Glenn Wehtje ◽  
John A. McGuire

Abstract Field experiments were conducted from 1981 through 1983 on a Dothan sandy loam (Plinthic Paleudults) at Headland, Alabama, to investigate the effects of row patterns and weed management systems on weed control, peanut yield, and net returns to land and management. Treatments consisted of three row patterns, a) conventional 91-cm rows, b) dual twin 18-cm rows, and c) triple twin 18-cm rows, and six weed management systems ranging from none to various combinations of herbicide and mechanical inputs. The experimental area was naturally infested with bristly starbur (Acanthospermum hispidum DC), sicklepod (Cassia obtusifolia L.), Florida beggarweed [Desmodium tortuosum (Sw.) DC.], large crabgrass [Digitaria sanguinalis (L.) Scop.], and Texas panicum (Panicum texanum Buckl.). Results showed that weed control was affected somewhat by row patterns with broadleaf weeds being more responsive to row pattern manipulation than grass weeds. Weed fresh weights were generally lower as row patterns narrowed from conventional 91-cm spacing, however exceptions did occur. Highest yields and net returns were obtained when peanuts were planted in the dual twin 18-cm rows and weed management included benefin applied preplant incorporated, plus alachlor applied preemergence, and two timely cultivations.


2012 ◽  
Vol 26 (4) ◽  
pp. 763-768 ◽  
Author(s):  
Sanjeev K. Bangarwa ◽  
Jason K. Norsworthy ◽  
Edward E. Gbur

Methyl bromide is a common fumigant for effective weed control in polyethylene-mulched vegetable crops. However, the ban on methyl bromide in the United States has created a need to find a suitable alternative. This study investigated the herbicidal efficacy of phenyl isothiocyanate (ITC) as a methyl bromide alternative for weed control in polyethylene-mulched bell pepper during 2006 and 2007. Six rates of phenyl ITC (0, 15, 75, 150, 750, 1,500 kg ha−1) under low-density polyethylene (LDPE) or virtually impermeable film (VIF) mulch were tested against yellow nutsedge, Palmer amaranth, and large crabgrass. Additionally, a standard treatment of methyl bromide/chloropicrin (67 : 33%) at 390 kg ha−1under LDPE mulch was included for comparison. VIF mulch provided no advantage over LDPE mulch in either improving weed control or marketable yield in bell pepper. Unacceptable pepper injury (≥ 60%) occurred at the highest phenyl ITC rate of 1,500 kg ha−1at 2 WATP in both years, regardless of mulch type. Higher bell pepper injury was observed in 2006 (≥ 36%) than in 2007 (≤ 11%) at 750 kg ha−1of phenyl ITC. The lower injury in 2007 could be attributed to aeration of beds 48 h prior to transplanting. Regardless of mulch type, phenyl ITC at 2,071 (± 197) and 1,655 (± 309) kg ha−1was required to control yellow nutsedge, Palmer amaranth, and large crabgrass equivalent to methyl bromide in 2006 and 2007, respectively. Bell pepper marketable yield at all rates of phenyl ITC was lower than methyl bromide in 2006. In contrast, marketable yield in phenyl ITC at 750–kg ha−1was equivalent to methyl bromide in 2007. It is concluded that phenyl ITC should be applied at least 4.2 times higher rate than methyl bromide for effective weed control, and bed aeration is required to minimize crop injury and yield loss. Additional research is needed to test phenyl ITC in combination with other weed control strategies to obtain effective weed control with acceptable crop safety.


1995 ◽  
Vol 9 (4) ◽  
pp. 801-806 ◽  
Author(s):  
John S. Richburg ◽  
John W. Wilcut ◽  
Gerald L. Wiley

Field experiments conducted at three locations in Georgia during 1991 and 1992 evaluated AC 263,222 and imazethapyr rates alone at 18, 36, 54, or 72 g ai/ha and in mixture for a total of 36, 54, or 72 g/ha of herbicide applied early-POST for weed control, peanut injury, and yield. An application of AC 263,222 at 72 g/ha controlled (> 90%)Ipomoeamorningglories, sicklepod, smallflower morningglory, and yellow nutsedge in all experiments and coffee senna and Florida beggarweed at Chula in 1991. Bristly starbur was controlled at least 90% with AC 263,222 at 72 g/ha at Tifton in 1991, but less than 62% at Chula in 1991. Imazethapyr applied at 72 g/ha controlled coffee senna,Ipomoeamorningglories, and smallflower morningglory at least 85%, but did not control Florida beggarweed or sicklepod and provided inconsistent bristly starbur and yellow nutsedge control. Bristly starbur and yellow nutsedge control was increased with several AC 263,222 plus imazethapyr mixtures. High peanut yields comparable to the standard were indicative of the AC 263,222 rate applied whether alone or in mixture with imazethapyr.


2017 ◽  
Vol 31 (4) ◽  
pp. 496-502 ◽  
Author(s):  
Daniel O. Stephenson ◽  
Jason A. Bond ◽  
James L. Griffin ◽  
Randall L. Landry ◽  
Brandi C. Woolam ◽  
...  

Field experiments were conducted in Louisiana and Mississippi from 2011 through 2013 to evaluate crop injury, weed control, and yield in field corn following pyroxasulfone applied PRE and POST. Pyroxasulfone PRE or POST did not injure corn at any evaluation. Barnyardgrass control was not improved with the addition of any POST treatment to pyroxasulfone alone or atrazine plus pyroxasulfone PRE; however, all POST treatments increased barnyardgrass control to at least 95% at all evaluations following atrazine PRE. All treatments that contained a PRE followed by POST application controlled browntop millet ≥90% at all evaluations. All POST treatments increased ivyleaf morningglory control to ≥92% following atrazine or pyroxasulfone alone PRE. However, control with atrazine plus pyroxasulfone PRE was similar or greater 28 d after POST than all treatments that received a POST application. In the absence of a POST treatment, pyroxasulfone or atrazine plus pyroxasulfone PRE controlled Palmer amaranth 93 to 96% at all evaluations, but atrazine alone PRE provided 84, 82, and 66% control 7, 14, and 28 d after POST, respectively. All programs that contained a PRE followed by POST herbicide treatment controlled Palmer amaranth >90% at all evaluations. Corn yield following all treatments except atrazine alone PRE and the nontreated were similar and ranged from 10990 to 12330 kg ha−1. This research demonstrated that pyroxasulfone can be a valuable tool for weed management in a corn weed management program.


1999 ◽  
Vol 26 (1) ◽  
pp. 23-28 ◽  
Author(s):  
W. J. Grichar ◽  
P. A. Dotray ◽  
D. C. Sestak

Abstract Field experiments were conducted in 1995 through 1997 in south and west Texas to evaluate diclosulam [N-(2,6-dichlorophenyl)-5-ethoxy-7-fluoro(1,2,4)-triazolo(1,5c)-pyrimidine-2-sulfonamide] for weed control in peanut. Diclosulam applied preplant incorporated at 0.01 kg ai/ha in combination with ethalfluralin at 0.84 kg ai/ha controlled Texas panicum, Palmer amaranth, morningglory species, and golden crownbeard at least 95% and devil's-claw 91%. When diclosulam rates were increased to 0.02 kg/ha, yellow and purple nutsedge were controlled at least 89 and 72%, respectively. Diclosulam applied postemergence (POST) provided erratic yellow nutsedge control.


Sign in / Sign up

Export Citation Format

Share Document