3D Printed Ion-Selective Membranes and Their Translation into Point-of-Care Sensors

Author(s):  
Dalton L. Glasco ◽  
Nguyen H. B. Ho ◽  
Art Matthew Mamaril ◽  
Jeffrey G. Bell
2021 ◽  
Vol MA2021-02 (55) ◽  
pp. 1579-1579
Author(s):  
Dalton Lee Glasco ◽  
Nguyen H Ho ◽  
Art Matthew Mamaril ◽  
Jeffrey Gordon Bell

The Analyst ◽  
2021 ◽  
Author(s):  
Tianshu Chu ◽  
Huili Wang ◽  
Yumeng Qiu ◽  
Haoxi Luo ◽  
Bingfang He ◽  
...  

Wearable sensors play a key role in point-of-care testing (POCT) for its flexible and integration capability on sensitive physiological and biochemical sensing. Here, we present a multifunction wearable silk patch...


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1796
Author(s):  
Miroslav Pohanka ◽  
Jitka Zakova

Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) can serve as biochemical markers of various pathologies like liver disfunction and poisonings by nerve agents. Ellman’s assay is the standard spectrophotometric method to measure cholinesterase activity in clinical laboratories. The authors present a new colorimetric test to assess AChE and BChE activity in biological samples using chromogenic reagents, treated 3D-printed measuring pads and a smartphone camera as a signal detector. Multiwell pads treated with reagent substrates 2,6-dichlorophenolindophenyl acetate, indoxylacetate, ethoxyresorufin and methoxyresorufin were prepared and tested for AChE and BChE. In the experiments, 3D-printed pads containing indoxylacetate as a chromogenic substrate were optimal for analytical purposes. The best results were achieved using the red (R) channel, where the limit of detection was 4.05 µkat/mL for BChE and 4.38 µkat/mL for AChE using a 40 µL sample and a 60 min assay. The major advantage of this method is its overall simplicity, as samples are applied directly without any specific treatment or added reagents. The assay was also validated to the standard Ellman’s assay using human plasma samples. In conclusion, this smartphone camera-based colorimetric assay appears to have practical applicability and to be a suitable method for point-of-care testing because it does not require specific manipulation, additional education of staff or use of sophisticated analytical instruments.


The Analyst ◽  
2021 ◽  
Author(s):  
Diwakar M. Awate ◽  
Cicero C. Pola ◽  
Erica Shumaker ◽  
Carmen L Gomes ◽  
Jaime Javier Juarez

Despite having widespread application in the biomedical sciences, flow cytometers have several limitations that prevent their application to point-of-care (POC) diagnostics in resource-limited environments. 3D printing provides a cost-effective approach...


Lab on a Chip ◽  
2021 ◽  
Author(s):  
David Perez-Guaita ◽  
Zack Richardson ◽  
G. Quintas ◽  
Julia Kuligowski ◽  
Diana Eva Bedolla ◽  
...  

Infrared Spectroscopy (IR) enables the direct and rapid characterization of cells at the molecular level. Achieving a rapid and consistent cell preparation is critical for the development of Point-of-Care diagnostics...


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Michael R. Behrens ◽  
Haley C. Fuller ◽  
Emily R. Swist ◽  
Jingwen Wu ◽  
Md. Mydul Islam ◽  
...  

Author(s):  
Awaiz Khan ◽  
Edmundo Rubio ◽  
Bradley Icard

Abstract This project sought to develop a method to provide a clinically meaningful, surrogate measure for viscosity that will help analyze complex biofluids. Goals for this project included precise measurements that differentiate a wide variety of standard viscosities, table-top level of size, and ease-of-use. The design utilized a custom 3D-printed analog of a cone and plate viscometer with an attachment for a smartphone to provide gyroscopic data. The device is currently in the stages of final validation and will ultimately be tested in a 40-patient clinical trial intended to assess efficacy of mucolytic therapy in mechanically ventilated patients.


PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0245206
Author(s):  
Harry Felton ◽  
Robert Hughes ◽  
Andrea Diaz-Gaxiola

This paper reports a novel, negligible-cost and open-source process for the rapid prototyping of complex microfluidic devices in polydimethylsiloxane (PDMS) using 3D-printed interconnecting microchannel scaffolds. These single-extrusion scaffolds are designed with interconnecting ends and used to quickly configure complex microfluidic systems before being embedded in PDMS to produce an imprint of the microfluidic configuration. The scaffolds are printed using common Material Extrusion (MEX) 3D printers and the limits, cost & reliability of the process are evaluated. The limits of standard MEX 3D-printing with off-the-shelf printer modifications is shown to achieve a minimum channel cross-section of 100×100 μm. The paper also lays out a protocol for the rapid fabrication of low-cost microfluidic channel moulds from the thermoplastic 3D-printed scaffolds, allowing the manufacture of customisable microfluidic systems without specialist equipment. The morphology of the resulting PDMS microchannels fabricated with the method are characterised and, when applied directly to glass, without plasma surface treatment, are shown to efficiently operate within the typical working pressures of commercial microfluidic devices. The technique is further validated through the demonstration of 2 common microfluidic devices; a fluid-mixer demonstrating the effective interconnecting scaffold design, and a microsphere droplet generator. The minimal cost of manufacture means that a 5000-piece physical library of mix-and-match channel scaffolds (100 μm scale) can be printed for ~$0.50 and made available to researchers and educators who lack access to appropriate technology. This simple yet innovative approach dramatically lowers the threshold for research and education into microfluidics and will make possible the rapid prototyping of point-of-care lab-on-a-chip diagnostic technology that is truly affordable the world over.


Sign in / Sign up

Export Citation Format

Share Document