Successful Dendrimer and Liposome-Based Strategies to Solubilize an Antiproliferative Pyrazole Otherwise Not Clinically Applicable

Water-soluble formulations of the pyrazole derivative 3-(4-chlorophenyl)-5-(4-nitrophenylamino)-1H-pyrazole-4-carbonitrile (CR232), which were proven to have in vitro antiproliferative effects on different cancer cell lines, were prepared by two diverse nanotechnological approaches. Importantly, without using harmful organic solvents or additives potentially toxic to humans, CR232 was firstly entrapped in a biodegradable fifth-generation dendrimer containing lysine (G5K). CR232-G5K nanoparticles (CR232-G5K NPs) were obtained with high loading (DL%) and encapsulation efficiency (EE%), which showed a complex but quantitative release profile governed by Weibull kinetics. Secondly, starting from hydrogenated soy phosphatidylcholine and cholesterol, we prepared biocompatible CR232-loaded liposomes (CR232-SUVs), which displayed DL% and EE% values increasing with the increase in the lipids/CR232 ratio initially adopted and showed a constant prolonged release profile ruled by zero-order kinetics. When relevant, attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) and nuclear magnetic resonance (NMR) spectroscopy, scanning electron microscopy (SEM) and dynamic light scattering (DLS) experiments, as well as potentiometric titrations completed the characterization of the prepared NPs. CR232-G5K NPs were 2311-fold more water-soluble than the pristine CR232, and the CR232-SUVs with the highest DL% were 1764-fold more soluble than the untreated CR232, thus establishing the success of both our strategies.

Infrared Spectroscopic Analysis of the Inorganic Components from Teeth Exposed to Psychotherapeutic Drugs

Teeth are unique and complex anatomical organs that can provide relevant data about a person's health, and play an important role in forensic medicine. Teeth are exposed to food, drinks, and the microbiota of the oral cavity; therefore, they have developed a high resistance to localized demineralization. Nevertheless, the continuous demineralization–remineralization cycle present in the oral environment can be influenced by stress, medication, mineralization agents, and other factors such as individual habits, especially diet. In this study, based on attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) spectra from tooth samples of 36 patients, several parameters were estimated: the crystallinity index (CI), the phosphate/amide I ratio, and the carbonate/phosphate ratio. In addition, in eight representative samples (six of the root of the tooth and two of the enamel area of the crown), additional characterization by X-ray powder diffraction (XRPD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) was conducted. From the FTIR data, it was observed that the highest CI values were found in patients who smoked. Further, in both root and crown samples, the intensity of the absorption band corresponding to PO43- increased in patients undergoing treatment with psychotherapeutic drugs. On the other hand, the intensity of the absorption band of the amide I group decreased with medical treatment and with the patient's biological age. Moreover, it was found that the remineralization process was more active in enamel than in the root due to direct contact with saliva. Regarding the results obtained from the X-ray powder diffractograms, exposure to psychotherapeutic drugs affected the definition of the peaks corresponding to hydroxyapatite, both in the crown and root samples. Concerning SEM results, qualitative differences in the stratification process in demineralized surfaces were observed, and EDS analyses showed some differences in the Ca/P ratio between pathological samples and control ones, but without clear patterns. The above techniques, in particular ATR-FTIR, showed promise for the investigation of the effect of changes produced in the hydroxyapatite structure in teeth and, consequently, to determine possible strategies in the diagnostic protocol.

FTIR INVESTIGATION ON CRYSTALLINITY OF HYDROXYPROPYL METHYL CELLULOSE-BASED POLYMERIC BLENDS

Two series of polymeric blends have been prepared based on hydroxypropyl methyl cellulose (HPMC)/polyacrylic acid (PAA) (1:1, 1:2, 1:3, 1:4) and HPMC/sodium alginate (SA) (1:30, 2:30, 3:30, 4:40) and investigated by Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR-FTIR). IR analysis confirmed the interaction between the polymeric components in the blend and the degree of structural organization. Crystallinity changes in the blends were observed as a function of a number of experimental parameters, such as temperature, composition and HPMC concentration, by determining the quantitative crystallinity indexes: Total Crystallinity Index (TCI), Lateral Order Index (LOI) and Hydrogen Bond Index (HBI).

Effect of Calcination on Shell Powder Catalyst Towards Effectiveness on Catalysing Transesterification of Crude Glycerol to Glycerol Carbonate

Valorisation of crude glycerol has gained much interest in the industry associated with the surplus of crude glycerol caused by the increase usage of biodiesel. Transesterification of crude glycerol using a heterogenous base catalyst is one of the effective ways to utilize the additional glycerol. Seawater clams commonly serve as a food source to us and the waste shells are a source of calcium carbonate that is abundantly available and can be converted into a heterogenous base catalyst for the transesterification process. Therefore, this study focuses on the utilization of catalyst synthesized from a species of seawater clam, Paratapes Undulatus in a transesterification reaction using crude glycerol (C.GLY) as a reactant together with dimethyl carbonate (DMC) to synthesize glycerol carbonate (GLYC). The catalysts are characterized using Field Emission Scanning Electron Microscope (FESEM), Attenuated Total Reflectance (ATR), Thermogravimetric Analysis (TGA), X-ray diffraction (XRD) and Particle Size Analyser (PSA). The product is characterized using Gas Chromatography (GC-FID). The performance of the synthesized shell catalyst with different calcination condition was studied. The reaction using the calcined shell catalyst is carried out at 75°C, molar ratio of 2 and 2wt% of catalyst for 1 hour. The catalyst that has the best performance is the shell catalyst that is calcined for 3h, which give the yield of 54.16%.

Synthesis of non-phosphorylated epoxidised corn oil as a novel green flame retardant thermoset resin

This study aimed to produce a new potential flame retardant thermoset resin from epoxidised corn oil through a one-pot method using liquid inorganic catalysed with hydrogen peroxide. Using a gas chromatography–mass selective detector, attenuated total reflectance-fourier transform infrared spectroscopy, proton nuclear magnetic resonance imaging, optical microscopy, and scanning emission microscopy, we synthesised a bio-based resin based on newly designed parameters. The flame retardant capacity was fully established using thermogravimetric analysis and a micro calorimeter. The produced epoxidised corn oil had a relative percentage conversion of oxirane of approximately 91.70%, wherein the amount of double bonds converted into epoxides was calculated. A significant reduction from 17 to 40% in peak heat rate release (pHRR) and 26–30% in total heat release was observed, confirming its flame retardant property. Thus, the potential of epoxidised corn oil was demonstrated.

Sterilization Induced Changes in Polypropylene-Based Ffp2 Masks

In the context of the SARS-CoV2 pandemic and because of the surgical and FFP2 mask (equivalent to the American N95 masks) shortages, studies on efficient sterilization protocols were initiated. As sterilization using irradiation is commonly used in the medical field, this method was among those that were evaluated. In this work, we tested irradiation under vacuum and under air (under both γ-rays and e-beams), but also, for acceptance purposes, undertook washing prior to the e-beam irradiation sterilization process. This article deals with the modifications induced by the sterilization processes at the molecular and the macromolecular scales on an FFP2 mask. Fourier transform infrared spectroscopy in attenuated total reflectance mode, size-exclusion chromatography and thermal-desorption–gas chromatography–mass spectrometry were used to characterize possible damage to the materials. It appeared that the modifications induced by the different sterilization processes under vacuum were relatively tenuous and became more significant when irradiation was performed using γ-rays under air.