Functional Copolymers Married with Lanthanide(III) Ions: A Win-Win Pathway to Fabricate Rare Earth Fluorescent Materials with Multiple Applications

2021 ◽  
Vol 13 (4) ◽  
pp. 5539-5550
Author(s):  
Shaoxiong Zhang ◽  
Weidong Yin ◽  
Zengming Yang ◽  
Yuan Yang ◽  
Zhao Li ◽  
...  
Author(s):  
Ping Wu ◽  
Qianli Ma ◽  
Wensheng Yu ◽  
Jinxian Wang ◽  
Gui-Xia Liu ◽  
...  

Here, we put forward a viewpoint that the energy transfer between different rare earth (RE) ions plays negative effect in RE ions doped white fluorescent materials if the native fluorescence...


RSC Advances ◽  
2016 ◽  
Vol 6 (113) ◽  
pp. 111959-111965 ◽  
Author(s):  
Ching-Fuh Lin ◽  
Tsung-Yo Tsai ◽  
Kuan-Yu Chen ◽  
Pin-Chun Shen

We explore an approach for efficient white light emission based on ZnSe:Mn nanoparticles without rare-earth and cadmium elements. This material opens up a new avenue for energy-saving, healthy, and environmentally benign lighting.


Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 239 ◽  
Author(s):  
Ionela Andreea Neacsu ◽  
Alexandra Elena Stoica ◽  
Bogdan Stefan Vasile ◽  
Ecaterina Andronescu

One new, promising approach in the medical field is represented by hydroxyapatite doped with luminescent materials for biomedical luminescence imaging. The use of hydroxyapatite-based luminescent materials is an interesting area of research because of the attractive characteristics of such materials, which include biodegradability, bioactivity, biocompatibility, osteoconductivity, non-toxicity, and their non-inflammatory nature, as well their accessibility for surface adaptation. It is well known that hydroxyapatite, the predominant inorganic component of bones, serves a substantial role in tissue engineering, drug and gene delivery, and many other biomedical areas. Hydroxyapatite, to the detriment of other host matrices, has attracted substantial attention for its ability to bind to luminescent materials with high efficiency. Its capacity to integrate a large assortment of substitutions for Ca2+, PO43−, and/or OH− ions is attributed to the versatility of its apatite structure. This paper summarizes the most recently developed fluorescent materials based on hydroxyapatite, which use rare earth elements (REEs) as dopants, such as terbium (Tb3+), erbium (Er3+), europium (Eu3+), lanthanum (La3+), or dysprosium (Dy3+), that have been developed in the biomedical field.


1992 ◽  
Vol 293 ◽  
Author(s):  
L.D. Carlos ◽  
M. AssunÇĀO ◽  
T.M. Abrantes ◽  
L. Alcacer

AbstractThe excitation and fluorescence spectra of PEOx EuBr3 (x=8, 16, 20, 24, 32) and PPO32 EuBr3 were recorded and analyzed in terms of the barycenters of each level of the ground septet of Eu3+. The site symmetry of the Europium ion is tentatively assigned to the C1,2, C5 or C2v cases. The maximum fluorescence intensity for each composition, together with the measured values for the lifetimes, suggest the possibility of these two polymeric electrolytes being used as fluorescent materials.


Author(s):  
N. M. P. Low ◽  
L. E. Brosselard

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.


Author(s):  
T. F. Kelly ◽  
P. J. Lee ◽  
E. E. Hellstrom ◽  
D. C. Larbalestier

Recently there has been much excitement over a new class of high Tc (>30 K) ceramic superconductors of the form A1-xBxCuO4-x, where A is a rare earth and B is from Group II. Unfortunately these materials have only been able to support small transport current densities 1-10 A/cm2. It is very desirable to increase these values by 2 to 3 orders of magnitude for useful high field applications. The reason for these small transport currents is as yet unknown. Evidence has, however, been presented for superconducting clusters on a 50-100 nm scale and on a 1-3 μm scale. We therefore planned a detailed TEM and STEM microanalysis study in order to see whether any evidence for the clusters could be seen.A La1.8Sr0.2Cu04 pellet was cut into 1 mm thick slices from which 3 mm discs were cut. The discs were subsequently mechanically ground to 100 μm total thickness and dimpled to 20 μm thickness at the center.


Author(s):  
G. M. Micha ◽  
L. Zhang

RENi5 (RE: rare earth) based alloys have been extensively evaluated for use as an electrode material for nickel-metal hydride batteries. A variety of alloys have been developed from the prototype intermetallic compound LaNi5. The use of mischmetal as a source of rare earth combined with transition metal and Al substitutions for Ni has caused the evolution of the alloy from a binary compound to one containing eight or more elements. This study evaluated the microstructural features of a complex commercial RENi5 based alloy using scanning and transmission electron microscopy.The alloy was evaluated in the as-cast condition. Its chemistry in at. pct. determined by bulk techniques was 12.1 La, 3.2 Ce, 1.5 Pr, 4.9 Nd, 50.2 Ni, 10.4 Co, 5.3 Mn and 2.0 Al. The as-cast material was of low strength, very brittle and contained a multitude of internal cracks. TEM foils could only be prepared by first embedding pieces of the alloy in epoxy.


1952 ◽  
Vol 44 (3) ◽  
pp. 442-442
Author(s):  
Frank Spedding ◽  
Harley Wilhelm ◽  
Wayne Keller et al
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document